I'm pretty sure that these problems are because I'm trying to use it on an Arduino Nano.
However, I'm not 100% sure as I still get other errors when compiling for Arduino Mega. Does it also require another timer library to be included?
Anyway, it would be nice to have something in the Readme about what board it requires and maybe a complete example with includes.
Build options changed, rebuilding all
sketch/Encoder.cpp: In function 'void setupTimerInterrupt()':
Encoder.cpp:12:3: error: 'TCCR3A' was not declared in this scope
TCCR3A = 0; // set entire TCCR3A register to 0
^
Encoder.cpp:13:3: error: 'TCCR3B' was not declared in this scope
TCCR3B = 0; // same for TCCR3B
^
Encoder.cpp:14:3: error: 'TCNT3' was not declared in this scope
TCNT3 = 0; //initialize counter value to 0
^
Encoder.cpp:17:3: error: 'OCR3AH' was not declared in this scope
OCR3AH = 0;
^
Encoder.cpp:23:3: error: 'OCR3AL' was not declared in this scope
OCR3AL = INTERRUPT_PERIOD;
^
Encoder.cpp:26:3: error: 'TIMSK3' was not declared in this scope
TIMSK3 = (1 << OCIE3A);
^
Encoder.cpp:26:18: error: 'OCIE3A' was not declared in this scope
TIMSK3 = (1 << OCIE3A);
^
Encoder.cpp:29:19: error: 'WGM32' was not declared in this scope
TCCR3B |= (1 << WGM32);
^
Encoder.cpp:32:19: error: 'CS30' was not declared in this scope
TCCR3B |= (1 << CS30) | (1 << CS31);
^
Encoder.cpp:32:33: error: 'CS31' was not declared in this scope
TCCR3B |= (1 << CS30) | (1 << CS31);
^
exit status 1
'TCCR3A' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
See below for errors I get.
I'm pretty sure that these problems are because I'm trying to use it on an Arduino Nano. However, I'm not 100% sure as I still get other errors when compiling for Arduino Mega. Does it also require another timer library to be included?
Anyway, it would be nice to have something in the Readme about what board it requires and maybe a complete example with includes.
......
Arduino: 1.8.9 (Mac OS X), Board: "Arduino Nano, ATmega328P (Old Bootloader)"
Build options changed, rebuilding all sketch/Encoder.cpp: In function 'void setupTimerInterrupt()': Encoder.cpp:12:3: error: 'TCCR3A' was not declared in this scope TCCR3A = 0; // set entire TCCR3A register to 0 ^ Encoder.cpp:13:3: error: 'TCCR3B' was not declared in this scope TCCR3B = 0; // same for TCCR3B ^ Encoder.cpp:14:3: error: 'TCNT3' was not declared in this scope TCNT3 = 0; //initialize counter value to 0 ^ Encoder.cpp:17:3: error: 'OCR3AH' was not declared in this scope OCR3AH = 0; ^ Encoder.cpp:23:3: error: 'OCR3AL' was not declared in this scope OCR3AL = INTERRUPT_PERIOD; ^ Encoder.cpp:26:3: error: 'TIMSK3' was not declared in this scope TIMSK3 = (1 << OCIE3A); ^ Encoder.cpp:26:18: error: 'OCIE3A' was not declared in this scope TIMSK3 = (1 << OCIE3A); ^ Encoder.cpp:29:19: error: 'WGM32' was not declared in this scope TCCR3B |= (1 << WGM32); ^ Encoder.cpp:32:19: error: 'CS30' was not declared in this scope TCCR3B |= (1 << CS30) | (1 << CS31); ^ Encoder.cpp:32:33: error: 'CS31' was not declared in this scope TCCR3B |= (1 << CS30) | (1 << CS31); ^ exit status 1 'TCCR3A' was not declared in this scope
This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.