Active verse - How to find it by: reference bar - blue marking - Bible pin up/down?

[GoogleCodeExporter]

What steps will reproduce the problem?
Having ESV, KJV, ESV, both ESV with cross refs in note box, all at John 9:1

1. Moving the cursor over the cross ref caller in ESV/9:11, puts the cross refs 
to 9:11 in the note box. Clicking the reference 9:11 (not the cross ref 9:6-7) 
puts all three Bibles to Jhn 9:11 (verse marked in blue in all three Bibles), 
but the verse box remains at 9:1).
2. Now pushing the Bible bin of one of the 3 Bibles down, changes the reference 
bar to John 9:11 but no verse is marked in blue any more.
3. Pushing the Bible bin up, puts all three Bibles to the first verse number 
visible in the Bible window, where the pin was pushed up.

What is the expected output? What do you see instead?
? -> Which verse is active at with at the 3 steps described?:
1. verse 11 becomes active (although the reference bar still shows verse 1.
2. ref bar shows 11, but no blue marking any more.
3. first verse of Bible with pin pushed up shows in ref window, no mark-up.

-> A system would help which makes it easier to identify the active verse.
What version of the product are you using? On what operating system?

Please provide any additional information below.

Original issue reported on code.google.com by wolfgang...@wycliff.de on 27 Jun 2012 at 10:24

[GoogleCodeExporter]

I see something similar - and the issue is accentuated when the passage is red 
text for WoJ. See attached screenshots.

Verse 41 which was current is highlighted in blue letters.

After using the verse spinner to make 38 current, verse 38 is not highlighted 
in blue, and verse 41 has unexpectedly become black text.

Original comment by DFH...@gmail.com on 27 Jun 2012 at 5:12

Attachments:

• xulsword_verse_41_current_within_red_text.png
• xulsword_verse_38_current_after_using_verse_spinner.png

[GoogleCodeExporter]

To comment 1:
The active verse is marked in 2 ways:
- 1st screenshot: the red text becomes blue text (this does not happen in 
Linux).
- 2nd screenshot: the red text stays red, only the verse number becomes blue.In 
addition the red text, which was active before, becomes black.  

Original comment by wolfgang...@wycliff.de on 3 Jul 2012 at 10:52

[GoogleCodeExporter]

To the (original) issue:

To 1. In order to go (from John 9:1) to John 9:11 to be able to click the 
caller (x): 
I clicked ESV and used PageDn before. 
Screen-shot:xs_refbar_versemarkup1.jpg

To 2.: See Screen-shot:xs_refbar_versemarkup2.jpg

To 3: There is no verse-markup in blue now and the reference is on John 9:10
See Screen-shot:xs_refbar_versemarkup3.jpg

Original comment by wolfgang...@wycliff.de on 3 Jul 2012 at 11:16

Attachments:

• xs_refbar_versemarkup3.jpg

[GoogleCodeExporter]

Did not attach the other 2 screenshots. Here they are

Original comment by wolfgang...@wycliff.de on 3 Jul 2012 at 11:17

Attachments:

• xs_refbar_versemarkup1.jpg
• xs_refbar_versemarkup2.jpg

[GoogleCodeExporter]

Sometimes there is no "active" verse. The verse in the verse box does not 
always appear blue, nor does it determine where on the page a particular verse 
will be (although the verse will always be on the page somewhere).

The "pinning/unpinning" code has been completely redone in 3.5+ so I think 
these problems are fixed now.

Original comment by gpl.prog...@gmail.com on 23 May 2013 at 8:31

• Changed state: Fixed