Open dpastorgalan opened 4 years ago
It uses the GaPWAPs that are defined in steps of 10 Myr and relative to plate with ID 701 (Central Africa?). So somehow you plate needs to be connected through a circuit to 701 for it to work.
Ok, I have checked the problem. My reconstruction tree modifies 701 (South Africa), I guessed the code got some conflict. However, I made a few changes renamed 701 in my recon and rotated it to "701" instead, and it still does not plot. I have attached a dummy file with plate id '7011' and rotations relative to 701.
I have tried the same dummy poles in 1.0 and they plot fine.
I can't see the file
There it goes
also just in case:
7011 0 90 0 0 701 ! LALALALALA 7011 10 90 0 0 701 !Hello Mathijs 7011 20 90 0 0 701 !Hello Mathijs 7011 30 90 0 0 701 !Hello Mathijs 7011 40 60 120 10 701 !Hello Mathijs 7011 50 60 120 20 701 !Hello Mathijs 7011 60 60 120 30 701 !Hello Mathijs 7011 70 60 120 40 701 !Hello Mathijs 7011 80 60 120 30 701 !Hello Mathijs 7011 90 60 120 20 701 !Hello Mathijs 7011 110 60 120 10 701 !Hello Mathijs 7011 120 90 0 0 701 !Hello Mathijs 7011 130 80 50 -10 701 !Hello Mathijs 7011 140 80 50 -20 701 !Hello Mathijs 7011 150 80 50 -30 701 !Hello Mathijs 7011 160 80 50 -40 701 !Hello Mathijs 7011 170 80 50 -50 701 !Hello Mathijs 7011 180 80 50 -40 701 !Hello Mathijs 7011 190 80 50 -30 701 !Hello Mathijs 7011 200 80 50 -20 701 !Hello Mathijs 7011 210 80 50 -10 701 !Hello Mathijs
Daniel Pastor-Galán
Assistant Professor Frontier Research Institute for Interdisciplinary Sciences (FRIS) Tohoku University
www.danielpastorgalan.com Skype: monomalvadodelarmario
On Nov 20, 2019, at 23:47, Jollyfant notifications@github.com wrote:
I can't see the file
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Jollyfant/PMAG2/issues/44?email_source=notifications&email_token=AEFFTKFRD7J5NOPE3W27T2LQUVEX7A5CNFSM4JODGOMKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEESGWYQ#issuecomment-556034914, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEFFTKBYKHTXP6GOGWFRPOTQUVEX7ANCNFSM4JODGOMA.
I have been trying the .rot files from Gplates and I am unsure how pmag 2.0 respond to this.
The rotation file has to be complete (until 0!) and it has to be written in intervals of 10 Million years, otherwise it does not plot. While I understand that paleomagnetism.org can't just make extrapolations as GPlates does, and therefore your file should contain steps to be reliable, it is a pain to get .rot files from the reconstruction Gplates exports and move all the plates you want until 0! Is there anyway to make that simpler?