search

Julien-laville / arducam-osd

Automatically exported from code.google.com/p/arducam-osd
0 stars 0 forks source link

Possible Regression with video format detection in V2.0 #34

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
OSD Setup:

Minim OSD (First version board)
PAL jumper soldered
Separate power sources for video and MCU side

Cam setup:
Keychain camera (808 #16 - probably PAL but not sure)

On startup, Cam powered down - everything is OK. When the camera is powered up 
and the cam video commences, the OSD appears to lose sync somehow, and the text 
is crunched up into the top half. See demo here:

http://www.youtube.com/watch?v=-rzhpBWejhU

Reset while the cam video is running does not help.

This behavior does not happen in V1.9 - hence this is probably a regression of 
some kind

Original issue reported on code.google.com by mandro...@googlemail.com on 4 Nov 2012 at 3:28

GoogleCodeExporter commented 9 years ago 
This guy sounds like he has the same problem:

http://diydrones.com/forum/topics/arducam-minimosd-distorting-on-screen?commentI
d=705844%3AComment%3A1012796&xg_source=activity

Original comment by mandro...@googlemail.com on 6 Nov 2012 at 9:00

GoogleCodeExporter commented 9 years ago 
I have a related problem I think, if my camera is plugged in when booting I 
loose OSD overlay, pressing the reset button doesent work... but if I unplug or 
power cycle the camera then it works..

It looks like the OSD doesent sync..  this only appears to be a problem on my 
600tvl  camera... as it works okay with a 480tvl camera.. have latest firmware  
installed and board is set for PAL in config tool

Have read somewhere that this is a known problem on high tvl cameras ?

Original comment by craig.ju...@gmail.com on 10 Dec 2012 at 6:41

GoogleCodeExporter commented 9 years ago 
The Maxim chip does have a problem with hi tvl cameras, however at least with 
my camera it works with the old firmware. There must be some subtle change to 
the way the code initialises the hardware

Original comment by mandro...@googlemail.com on 1 Jan 2013 at 1:59

GoogleCodeExporter commented 9 years ago 
I'm having the same issue with a Sony 600TVL camera. The OSD functions 
perfectly with the camera unplugged. As soon as I plug in the camera I get a 
great image with no text overlay. I've tested this with every available version 
of 2.x (arducam-osd and minimOSD Extra 2.1 and 2.1.5). I get the same results 
with all versions.

Version 1.9 works perfectly.

To confirm this isn't a wiring issue, when I plug my GoPro in with 2.x it works 
perfectly.

I posted this issue to the MinimOSD Extra team, as well. I'm not trying to get 
people to duplicate effort, I just want to make sure I get the info to the 
right people. 

http://code.google.com/p/minimosd-extra/issues/detail?id=14&thanks=14&ts=1362455
393

I've also attached the specs for my camera.

Thank you!

Original comment by parkefly...@gmail.com on 5 Mar 2013 at 3:57

Attachments:

GoogleCodeExporter commented 9 years ago 
Hi,

I have asked Sandro to take a look also.

He have changed a few things.
Like it is auto detecting again, but if no video input than defaults to the 
standard you set in CT.

Can you try?

Gábor

Original comment by gabek...@gmail.com on 12 Mar 2013 at 11:04

Attachments:

GoogleCodeExporter commented 9 years ago 
Awesome. I will test it. 

Thanks,
Preston

Original comment by parkefly...@gmail.com on 13 Mar 2013 at 3:14

GoogleCodeExporter commented 9 years ago 
Hi,

Please tell me the resoult. ;)

Thx

Original comment by gabek...@gmail.com on 13 Mar 2013 at 4:43

GoogleCodeExporter commented 9 years ago 
Nothig yet? :)

Original comment by gabek...@gmail.com on 15 Mar 2013 at 11:38

GoogleCodeExporter commented 9 years ago 
It works!!! Sorry for the delayed response. I've been out of town. I should 
have let you know that. Thank you. Anything else I can test?

Original comment by parkefly...@gmail.com on 17 Mar 2013 at 11:14

GoogleCodeExporter commented 9 years ago 
Thank you!

I am glad it works now.

We will release a new stable release soon. ;)

Gábor

Original comment by gabek...@gmail.com on 18 Mar 2013 at 1:31

GoogleCodeExporter commented 9 years ago

Original comment by ga...@t-email.hu on 18 Mar 2013 at 1:32

GoogleCodeExporter commented 9 years ago 
Hi Gabor,

I also have an 600TVL camera but this firmware doesn't work.
http://www.foxtechfpv.com/wdr-760-600tvl-wide-dynamic-range-cam%EF%BC%88Pal%EF%B
C%89-p-492.html

Does i need to set somethings on the camera ?

Thank's a lot.

regards.

Original comment by pascal.v...@gmail.com on 27 Mar 2013 at 12:45

GoogleCodeExporter commented 9 years ago 
I'm having the same issue with Sony Super HAD II camera. No firmware I've tried 
works, so I'm stuck with power cycling the camera every time I fly :(

Original comment by futurej...@gmail.com on 29 Mar 2013 at 3:51

GoogleCodeExporter commented 9 years ago 
It can be because you turn on your cam after the OSD.

There is two way to set standard now, thanks to Sandro.

By hand from CT. And automatically. 
By hand from CT works in most cases. But some cameras.

Some cameras need special handling that the graphical chip does. But this way 
you need to make the chip detect it automatically. As it does checks once on 
boot, that is why you need to power your OSD after your camera or together with 
(if your camera boots fast enough).

Gábor

Original comment by gabek...@gmail.com on 29 Mar 2013 at 10:13