Failed to call service Tapo_control/ptz. Service not found

[apnaf]

Description

I have the following picture glace card configuration:

camera_view: live type: picture-glance title: Entrada entities:

• entity: camera.patio_entrada_sd_stream icon: mdi:arrow-left-drop-circle-outline tap_action: action: call-service service: tapo_control.ptz service_data: entity_id: camera.patio_entrada_sd_stream pan: LEFT
• entity: camera.patio_entrada_sd_stream icon: mdi:arrow-up-drop-circle-outline tap_action: action: call-service service: tapo_control.ptz service_data: entity_id: camera.patio_entrada_sd_stream tilt: UP
• entity: camera.patio_entrada_sd_stream icon: mdi:arrow-down-drop-circle-outline tap_action: action: call-service service: tapo_control.ptz service_data: entity_id: camera.patio_entrada_sd_stream tilt: DOWN
• entity: camera.patio_entrada_sd_stream icon: mdi:arrow-right-drop-circle-outline tap_action: action: call-service service: tapo_control.ptz service_data: entity_id: camera.patio_entrada_sd_stream pan: RIGHT
• entity: camera.patio_entrada_sd_stream icon: mdi:eye-outline tap_action: action: call-service service: tapo_control.set_privacy_mode service_data: entity_id: camera.patio_entrada_sd_stream privacy_mode: 'off'
• entity: camera.patio_entrada_sd_stream icon: mdi:eye-off-outline tap_action: action: call-service service: tapo_control.set_privacy_mode service_data: entity_id: camera.patio_entrada_sd_stream privacy_mode: 'on'
• entity: camera.patio_entrada_sd_stream icon: mdi:power tap_action: action: call-service service: tapo_control.reboot service_data: entity_id: camera.patio_entrada_sd_stream camera_image: camera.patio_entrada_sd_stream

When i press any icon for camera movement I get the error mentioned above. Can you give me some guidance. Thanks in advance

Reproduction Steps

.

Expected behavior

.

If applicable, add error logs.

No response

Device Firmware

1.3.6

Using stream component

Yes

Does camera work via official integrations?

Yes

Camera has all attributes filled out in developer tools

Yes

HASS Environment

Home Assistant 2023.8.2 Supervisor 2023.08.1 Operating System 10.4 Frontend 20230802.0 - latest

Search for similar issues

Yes

Additional information

Camera model is Tapo c200

[JurajNyiri]

Read readme. tapo_control.ptz has been replaced with a proper entity very long time ago.