Connection maintained with incorrect password.

[LuizAugusto1323]

After trying to connect with peripheral.connect() and requesting the product password, when I enter the wrong password, I get a response from Kable/Callback that the connection status has changed and the product has been disconnected, but then I receive a suppression from Kable/Observation about the connection failure and after that Kable/Peripheral tells me that I am connected, and I don't understand why this response is given. Version = "0.34.0"

BluetoothGatt D connect() - device: xx:xx:xx:xx:xx:1D, auto: false BluetoothGatt D registerApp() BluetoothGatt D registerApp() - UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx BluetoothGatt D onClientRegistered() - status=0 clientIf=7 BluetoothGatt D onClientConnectionState() - status=0 clientIf=7 device=xx:xx:xx:xx:xx:1D Kable/Callback D xx:xx:xx:xx:xx:1D onConnectionStateChange, status: Success, newState: Connected Kable/Peripheral V xx:xx:xx:xx:xx:1D discoverServices BluetoothGatt D discoverServices() - device: xx:xx:xx:xx:xx:1D BluetoothGatt D onConnectionUpdated() - Device=xx:xx:xx:xx:xx:1D interval=6 latency=0 timeout=500 status=0 BluetoothGatt D onSearchComplete() = Device=xx:xx:xx:xx:xx:1D Status=0 Kable/Callback D xx:xx:xx:xx:xx:1D onServicesDiscovered, status: GATT_SUCCESS(0) Kable/Peripheral V xx:xx:xx:xx:xx:1D Discovered 5 services Kable/Peripheral V xx:xx:xx:xx:xx:1D Configuring characteristic observations Kable/Peripheral D xx:xx:xx:xx:xx:1D setCharacteristicNotification, service: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, characteristic: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, value: true BluetoothGatt D setCharacteristicNotification() - uuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx enable: true Kable/Peripheral V xx:xx:xx:xx:xx:1D Writing ENABLE_NOTIFICATION_VALUE to CCCD, service: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, characteristic: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, descriptor: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Kable/Peripheral D xx:xx:xx:xx:xx:1D write, service: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, characteristic: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, descriptor: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, data: 01 00 BluetoothGatt D onConnectionUpdated() - Device=xx:xx:xx:xx:7A:1D interval=39 latency=0 timeout=500 status=0

I entered the wrong password…

BluetoothGatt D onClientConnectionState() - status=22 clientIf=7 device=xx:xx:xx:xx:xx:1D Kable/Callback D xx:xx:xx:xx:xx:1D onConnectionStateChange, status: 22, newState: Disconnected BluetoothGatt D close() BluetoothGatt D unregisterApp() - mClientIf=7 Kable/Observation V xx:xx:xx:xx:xx:1D Suppressed failure: com.juul.kable.ConnectionLostException Kable/Peripheral I xx:xx:xx:xx:xx:1D Connected

[twyatt]

By "password", are you referring to the PIN requested during pairing/bonding? If so, bonding is not yet supported (tracked by #111).

[LuizAugusto1323]

Yes, but in previous versions like 0.27.0, the return of Kable/Peripheral changes, instead of there being a suppression, the log tells me the following:

Kable/Callback D xx:xx:xx:xx:xx:1D onConnectionStateChange, status: Success, newState: Disconnected BluetoothGatt D close() BluetoothGatt D unregisterApp() - mClientIf=7 BluetoothGatt D close() BluetoothGatt D unregisterApp() - mClientIf=0 BluetoothGatt D close() BluetoothGatt D unregisterApp() - mClientIf=0 Kable/Peripheral E xx:xx:xx:xx:xx:1D Failed to connect, kotlinx.coroutines.JobCancellationException: Job was cancelled; job=JobImpl{Cancelled}@cf40dac

With this return, the State of the peripheral returns Disconnected, in the return above, the state of the peripheral remains as connected, I imagine because of the suppression