search

Jyers / Marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
http://marlinfw.org
GNU General Public License v3.0
2.14k stars 385 forks source link

Sprite Extruder #2074

Open Ayasha-Code opened 1 year ago

Ayasha-Code commented 1 year ago

When Auto Leveling the print head moves to the correct position but it puts the CR Touch off the front of the hot plate. So it cant get a correct reading. Is there a way to adjust that in this firmware?

The link for the custom firmware that came with the print assembly is https://bit.ly/3zPZzk1

Chuckebemeh commented 1 year ago

I just installed a sprite on my ender 3 v2 i used UBL 10x10all work tho. Go in the settings on your printer there's a probe offset settings measure the offset between nozzle and probe put offset in and then use z offset tool to see if your measurements are correct if they are your nozzle and probe should hover/touch the same spot on the bed when homing z offset. that fixed it for me hope this helps you.