This is frequently caused by running an older version of the
firmware on the MCU(s). Fix by recompiling and flashing the
firmware.
Your Klipper version is: ef6720f8
MCU(s) which should be updated:
mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_100121-ubuntu
nozzle_mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_100254-ubuntu
leveling_mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_095416-ubuntu
rpi: Current version v0.11.0-372-gb9ad7605
Up-to-date MCU(s):
Once the underlying issue is corrected, use the "RESTART"
command to reload the config and restart the host software.
mcu 'nozzle_mcu': Command format mismatch: query_adxl345 oid=%c rest_ticks=%u vs query_adxl345 oid=%c clock=%u rest_ticks=%u
don't have the time to setup and figure out how to get new code generated then how to get it downloaded.
MCU Protocol error
This is frequently caused by running an older version of the firmware on the MCU(s). Fix by recompiling and flashing the firmware.
Your Klipper version is: ef6720f8 MCU(s) which should be updated: mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_100121-ubuntu nozzle_mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_100254-ubuntu leveling_mcu: Current version 1.3.0.40-5-g6977eaff-dirty-20230711_095416-ubuntu rpi: Current version v0.11.0-372-gb9ad7605 Up-to-date MCU(s):
Once the underlying issue is corrected, use the "RESTART" command to reload the config and restart the host software.
mcu 'nozzle_mcu': Command format mismatch: query_adxl345 oid=%c rest_ticks=%u vs query_adxl345 oid=%c clock=%u rest_ticks=%u
don't have the time to setup and figure out how to get new code generated then how to get it downloaded.