10.12 compatibility - Githubissues

Majkwin commented 8 years ago

Hello guys! I've installed 10.12 GM on my 573g with i5 and basically it's working in 95%. Known issues: 1) No fully compatible keyboard and touchpad driver

FN keys doesn't work
touchpad settings in system preferences doesn't work 2) Internal camera doesn't work

Beside that, I didn't notice any bugs yet...

Kaijun commented 8 years ago

good job. Thanks for your information. By the way, what's your touchpad vendor?

If both touchpad/keyboard and internal camera don't work properly, then it could be something wrong with USB

Majkwin commented 8 years ago

Synaptics. No, from what I'm reading FN keys and trackpad prefpane doesn't work because of modification in system code in 10.12. Rehabman is working on update of VoodooPS2, but in the meantime I'm trying to set up ApplePS2SmartTouchPad kext. It's working way better, with already some of FN functionality implemented.

michaelspeed commented 8 years ago

can you share the ApplePS2SmartTouchPad kext? i was also looking for a viable replacement for VoodooPS2. i am up and running with 10.12 GM

Majkwin commented 8 years ago

http://forum.osxlatitude.com/index.php?/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/ It's this one. Note that is way worse IMHO from VoodooPS2. It requires a lot of plist modification to adjust it for Your needs. I strongly suggest waiting for Voodoo until updating to 10.12

2016-09-20 10:40 GMT+02:00 Risha Sringa Changmai notifications@github.com:

can you share the ApplePS2SmartTouchPad kext? i was also looking for a viable replacement for VoodooPS2. i am up and running with 10.12 GM

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-248240206, or mute the thread https://github.com/notifications/unsubscribe-auth/AIRshJ0atyedxfvgOe0TKYOlND0fpdxyks5qr5wLgaJpZM4J8hNj .

michaelspeed commented 8 years ago

ok, will wait for the voodooPS2. anyway 10.12 coming out today.will do a fresh install when its out

michaelspeed commented 8 years ago

installed 10.12 release from yesterday. up and running well.smooth. audio and everything works. with some glitches -

display pref panel does not open. DSDT the same one provided by Kaijun.
SIP is enabled. even after rootless mode in clover

EDIT: VoodooPS2 I was using in El Capitan works if I keep it in the clover kext folder. but if I install it. it stops working

Majkwin commented 8 years ago

Both point were working for me.

W dniu środa, 21 września 2016 Risha Sringa Changmai < notifications@github.com> napisał(a):

installed 10.12 release from yesterday. up and running well.smooth. audio and everything works. with some glitches -

display pref panel does not open. DSDT the same one provided by Kaijun.

SIP is enabled. even after rootless mode in clover

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-248583459, or mute the thread https://github.com/notifications/unsubscribe-auth/AIRshCM7DwRZ4S81tJD2k4Vgk-AGjfVnks5qsRQzgaJpZM4J8hNj .

Pozdrawiam, Michał Winiarski

michaelspeed commented 8 years ago

can you check if any application cracks working, coz none of them working on my end get

I get this if I open any of the cracks - `Time Awake Since Boot: 1000 seconds

System Integrity Protection: enabled

Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Exception Type: EXC_CRASH (SIGKILL) Exception Codes: 0x0000000000000000, 0x0000000000000000 Exception Note: EXC_CORPSE_NOTIFY

Termination Reason: EXEC, [0xc] This UPX compressed binary contains an invalid Mach-O header and cannot be loaded.`

Kaijun commented 8 years ago

Hey guys, how do you make the sound work?

Kaijun commented 8 years ago

using the patched Kext or the dummy hack?

Majkwin commented 8 years ago

Dummy hda. Check the one that i've been posting here in the past. It's in closed issues

W dniu sobota, 1 października 2016 Kaijun Chen notifications@github.com napisał(a):

using the patched Kext or the dummy hack?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-250895968, or mute the thread https://github.com/notifications/unsubscribe-auth/AIRshCGsf_9FdoQ1kQy3w_ggTHe-N1Z4ks5qvf78gaJpZM4J8hNj .

Pozdrawiam, Michał Winiarski

michaelspeed commented 8 years ago

i used AppleHDA patcher. works like a charm

Kaijun commented 8 years ago

@michaelspeed sorry, i just forgot which version should i choose to patch... ALC 282 v1 or v2?

Kaijun commented 8 years ago

@Majkwin ok, i just re-patched the kext with the new AppleHDA Patcher and generated the new DummyHDA, now it works.

Majkwin commented 8 years ago

Any updates? Are some of You currently using Sierra?

Kaijun commented 8 years ago

🙋

and i found a temporary solution for corrupt trackpad preference: replace the pref file from el captain: https://www.tonymacx86.com/threads/solved-trackpad-preference-pane-is-blank.199946/page-2#post-1326398

other problems plz check: https://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/

michaelspeed commented 8 years ago

do you guys get a "could not load Display preferrence panel" in settings with HD4400? i can confirm this only hurts HD4400

Kaijun commented 8 years ago

@michaelspeed yes. check the second link i posted. and a thread inside it also described this problem: https://www.tonymacx86.com/threads/display-prefpane-cant-load-found-the-problem-and-solution.203955/

If you are same lazy as me, and don't wanna do further research, just copy:

00 FF FF FF FF FF FF 00 0D AF 92 15 00 00 00 00 35 13 01 03 80 1D 10 78 0A 07 F5 9A 57 4E 87 26 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 4C 1D 56 CA 50 00 1D 30 3C 28 46 00 58 C1 10 00 00 18 00 00 00 FE 00 4E 31 35 36 42 36 2D 4C 30 42 0A 20 20 00 00 00 FE 00 43 4D 4F 0A 20 20 20 20 20 20 20 20 20 00 00 00 FE 00 4E 31 35 36 42 36 2D 4C 30 42 0A 20 20 00 2C

into the EDID section in Clover Configurator and Enable Inject EDID

just like this:

Kaijun commented 8 years ago

no worry, Clover Configurator will trim the spaces between the codes automatically!

michaelspeed commented 8 years ago

thanx will give it a try. i have been banned from tonnymacx86 for using app cracks

michaelspeed commented 8 years ago

confirmend working thanx

michaelspeed commented 8 years ago

did anyone try 10.12.1 ? i m hearing it breaks the compatibility a lot?

michaelspeed commented 8 years ago

i have a strange bug here, when watching youtube it plays ok, but when i start to play form other sites the it freezes, not even the mouse moves. its like KP. i cannot see any logs for it, but definitely feels like KP. any solutions. Flash is installed and upgraded.

Ace73 commented 8 years ago

I've just installed Sierra (clean) on my i7 variant, and everything works. I face the following issues:

Shutdown - The display turns off, but it stays on. Reboot, however, works and is quite fast.
Using the computer after I wake up from sleep is a horrendous laggy experience, something I wouldn't ever want to experience again.

On a side note, I'm on BIOS v2.30, and have flashed the ME files in the body of the post.

Kaijun commented 8 years ago

@Ace73 Only Sierra has such issues?

@michaelspeed i also have some kind of this issue, but it's not reproducible actually, it just happens randomly(not that often, once every 1/2 month?). Especially while watching YouTube, or running Flash player. I guess it's still related to the compatibility of graphics. Maybe changing the ig-platform-id would help.

Kaijun commented 8 years ago

@michaelspeed or because that you injected the EDID? rollback and see if it is fixed?

michaelspeed commented 8 years ago

confirm about shutdown not working! i only shutdown once a week. no the problem was before EDID, and it does not occur when playing youtube. youtube is fine. just that some other flash players are really messing with the flash.

Kaijun commented 8 years ago

@michaelspeed i haven't shut the laptop down for a while. I will also test if EDID affect shutdown. Maybe we can't just simply copy the EDID from other model.

michaelspeed commented 7 years ago

yes but the EDID is definitely working. the display preference is working and i think we need t start working on 10.12.1

mexok commented 7 years ago

@Majkwin Can you be more specific which fn keys don't work? I have installed the newest VoodooPS2Controller by RehabMan (Link: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller) from 2016-12-08 and it works like a charm on Mac OS X 10.12. I can use fn keys for brightness and volume control, inclusive disable sound. However, the touchpad settings in system preferences doesn't work, too. I have also an Acer Aspire v5 573g with an Intel i5 Processor.

Edited: After 2 restarts i can edit the touchpad settings in system preferences, too. So i hope this solves your issue 1. To be more specific: I have installed VoodooPS2Controller -> restarted -> installed kexts ACPIBatteryManager.kext and aDummyHDA.kext -> restarted -> touchpad settings worked. I cannot explain why the touchpad settings didn't work in first place, but it happened this way.

macmeister1967 commented 7 years ago

Just installed thanks to this wonderful contributor! (Kaijun et al)... on a V5-573 non-G i7 Haswell 4500u. Just updated to 10.12.4

Screen Brightness worked on 10.12.0, but stopped working entirely on 10.12.4 (still have slider in prefpane tho). Locked at 100% brightness, but can use 3rd-party apps to adjust it (with incorrect scale) -- such as Brightness Slider.

Obviously, the Realtek card reader doesn't work...

Headphone did not work with AppleHDA/DummyHDA method, but VoodooHDA 2.8.9 works fine, need to fix volume from about 80% starting position each start... as VoodooSettingsLoader no longer works properly with this version/OS.

hehljo commented 7 years ago

If I create the USB Stick with Sierra and Clover (Legacy Mode), replace just the CLOVER Folder i get stuck at the Apple Logo and it reboots. Have you Guys changed something more then just the CLOVER folder? For example renaming the 10.11 folder? Got a i5 4200U if it matters

macmeister1967 commented 7 years ago

You did something wrong... are you using the dsdt/ssdt from the 4200u branch?

I am using the i7 4500u model, and it is (nearly) PERFECT. Let me know if you are using -xcpm at startup? LAPIC patch?

I now have vanilla AppleHDA and AppleALC.kext solution working... it appears it was only a port-sensing issue. Still no native screen brightness tho.

Kaijun commented 7 years ago

@hehljo boot with -v argument and paste the result?

hehljo commented 7 years ago

Thanks for your fast reply. I just replaced the CLOVER folder with the latest release from Kaijun with no adjustment. (because its optimized for the 4200U with HD4400) If i boot with -v i just get a black screen with no log and it reboots after a minute. The boot argument -xcpm is also the Clover settings.

If i try installing El Capitan i get the error

This copy of the Install OS X El Capitan application can't be verified. It may have been corrupted or tampered with during downloading

so i tried installing the latest OS from Apple.

Sorry these are my first experiences with Hackintosh

macmeister1967 commented 7 years ago

The certificates of older OS expire... why aren't you using Sierra?

If you switch to Sierra 10.12.4, I can supply my EFI folder, all you need to do is delete SSDT and reboot with GenerateCStates/PStates = YES

I have patched for a lot of things... did you follow the BIOS MEI update procedure?

On 13 April 2017 at 20:35, hehljo notifications@github.com wrote:

Thanks for your fast reply. I just replaced the CLOVER folder with the latest release from Kaijun with no adjustment. (because its optimized for the 4200U with HD4400) If i boot with -v i just get a black screen with no log and it reboots after a minute. The boot argument -xcpm is also the Clover settings.

If i try installing El Capitan i get the error

This copy of the Install OS X El Capitan application can't be verified. It may have been corrupted or tampered with during downloading

so i tried installing the latest OS from Apple.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-293853928, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroeJsDURRmxIfuSyurIuA4RPbd8DTks5rvfqKgaJpZM4J8hNj .

hehljo commented 7 years ago

I tried installing Sierra from a fresh created USB Stick with Clover. I did it strictly like the guide in Issue #7 with no changes. There was nothing with a BIOS MEI update, i just updated the BIOS to the last version 2.30.

Now i deleted all the SSDT files in the patched folder and changed the following values:

First try only changed CLOVER/config.plist Root/ACPI/SSDT/Generate NO -> YES
Next try also changed CLOVER/OEM/SystemProductName/config.plist Root/ACPI/GenerateCStates and GeneratePStates NO -> Yes and CLOVER/OEM/SystemProductName/UEFI/config.plist Root/ACPI/GenerateCStates and GeneratePStates NO -> Yes

But the same problem with stuck at the Apple Logo.

Maybe u can supply me your EFI folder. Its a bit confusing that with the OSX El Capitan were no problems, except the certificates.

macmeister1967 commented 7 years ago

It is LITERALLY the first thing in the guide:

" Acer V5-573G Hackintosh

All my hackintosh stuffs of Acer V5-573G

News

Shutdown/Sleep/Restart issues described in issue 6 https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6 was fixed! Check the Management-Engine-Firmware https://github.com/Kaijun/Acer-V5-573G-Hackintosh/tree/master/Management-Engine-Firmware folder!"

sigh

On 14 April 2017 at 04:21, hehljo notifications@github.com wrote:

I tried installing Sierra from a fresh created USB Stick with Clover. I did it strictly like the guide in Issue #7 https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/7 with no changes. There was nothing with a BIOS MEI update, i just updated the BIOS to the last version 2.30.

Now i deleted all the SSDT files in the patched folder and changed the following values:

First try only changed CLOVER/config.plist Root/ACPI/SSDT/Generate NO -> YES

Next try also changed CLOVER/OEM/SystemProductName/config.plist Root/ACPI/GenerateCStates and GeneratePStates NO -> Yes and CLOVER/OEM/SystemProductName/UEFI/config.plist Root/ACPI/GenerateCStates and GeneratePStates NO -> Yes

But the same problem with stuck at the Apple Logo.

Maybe u can supply me your EFI folder. Its a bit confusing that with the OSX El Capitan were no problems, except the certificates.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-293981427, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcrob8xdpvLxLAb_1qfF5oEaklRU2uPks5rvmezgaJpZM4J8hNj .

macmeister1967 commented 7 years ago

Archive.zip

Find my EFI folder and some patched 10.12.4 kexts attached.

NOTE: I have made no NVIDIA/Discrete GPU changes in DSDT, as not necessary for my non-G 573.

NOTE2: I made all the other patches for the 573G, so apart from the SSDT file for the 4500U, it should work fine (all CPU related items removed).

Best of luck.

hehljo commented 7 years ago

Thank you for your efforts. I updated the MEI update and get the Installer to work with your EFI. If i choose '-v' at CLOVER i get an error and the Laptop reboots when the Sierra installation is at "7 seconds remaining"

macmeister1967 commented 7 years ago

That is probably trying to update Apple EFI files (which do not exist). The actual install is probably fine, because it is a two-step install, boot back into the USB installer to complete the install...

On 14 April 2017 at 20:43, hehljo notifications@github.com wrote:

Thank you for your efforts. I updated the MEI update and get the Installer to work with your EFI. If i choose '-v' at CLOVER i get an error and the Laptop reboots when the Sierra installation is at "7 seconds remaining"

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-294134229, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroazp-DrV1NQQbDqexvW_V_dvse-Vks5rv03OgaJpZM4J8hNj .

hehljo commented 7 years ago

Sry i think I'm too stupid to get it work... If i install it again it starts from the beggining and stops at the same point. Doesn't matter how many times i boot into Clover and do the OSX install procedure.

Install Log No native mechanism to verify InstallInfo.plist No native mechanism to verify InstallESD.dmg Operation queue succeeded Boot chime muted

I can't get into the second step of the Installation because there is only the USB stick to select in Clover.

macmeister1967 commented 7 years ago

point of startup or point of install?

Fresh install is usually two steps, and you need to restart via USB and GO TO USB INSTALLER AGAIN, and install again... only then is it complete.

On 20 April 2017 at 17:09, hehljo notifications@github.com wrote:

Sry i think I'm too stupid to get it work... If i install it again it starts from the beggining and stops at the same point. Doesn't matter how many times i boot into Clover and do the OSX install procedure.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-295604842, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroX7_Cpx_6Ymg7riz9gBSZN7O9Imlks5rxwSbgaJpZM4J8hNj .

hehljo commented 7 years ago

After the installation i get the posted Install Log and it restarts to Clover and i startet the Installation again. But its allways the same installation procedure and not a different step then the first installation.

Now i tried the Startup Disk but it only reboots into Clover and i just can start the macOS Installer from the USB Stick like the times before.

Now i try to restore from a TimeMachine Backup

macmeister1967 commented 7 years ago

It looks identical, but trust me, the second install is different and legit.

After second install, boot to internal from USB Clover... and it should complete the install and get to the desktop.

Here's hoping anyway (PS. It only shows the log if there was an error).

On 20 April 2017 at 21:37, hehljo notifications@github.com wrote:

After the installation i get the posted Install Log and it restarts to Clover and i startet the Installation again. But its allways the same installation procedure and not a different step then the first installation.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-295698166, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroZ8hUMxwiBa9D7YE1YxJ_XF19PpXks5rx0N4gaJpZM4J8hNj .

hehljo commented 7 years ago

Thanks for all your help. I get it to work with a TimeMachine Restore :)

macmeister1967 commented 7 years ago

Hooray... don't forget that BIOS flash from EFI shell, otherwise machine will not shutdown :-(

On 21 April 2017 at 16:36, hehljo notifications@github.com wrote:

Thanks for all your help. I get it to work with a TimeMachine Restore :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-296092825, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroaPLAU_9_MjcJJAIsVbeJUTo8Jmvks5ryE5ogaJpZM4J8hNj .

hehljo commented 7 years ago

The most works fine. Shutdown reboot and all that stuff works. I'm using a TP-LINK nano Wlan Stick with the divers directly from TP-LINK.

Only thing is the Touchpad which i'm experimenting with. Only the leftclick works on the Hardware Button of the Touchpad. No Touch functionality and no right click.

macmeister1967 commented 7 years ago

I used VoodooPS2Controller.kext, I have left click, right click on hardware... click and double-finger drag, right-click on tap is hard, as sensitivity is too low... I disabled with FN-key and use wireless mouse with micro-dongle... :-)

On 21 April 2017 at 23:24, hehljo notifications@github.com wrote:

The most works fine. Shutdown reboot and all that stuff works. I'm using a TP-LINK nano Wlan Stick with the divers directly from TP-LINK.

Only thing is the Touchpad which i'm experimenting with. Only the leftclick works on the Hardware Button of the Touchpad. No Touch functionality and no right click.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/42#issuecomment-296189647, or mute the thread https://github.com/notifications/unsubscribe-auth/AZcroXjGphrY4IjRnGfjtwmb0iYlL8A2ks5ryK4mgaJpZM4J8hNj .

hehljo commented 7 years ago

The last try i looked into Touchpad options and it doesn't recognized my Touchpad.# Now after another try of installing the VoodooPS2Controller all works fine :)

Again, thanks for your help with your EFI folder without it would be a lot of work for me!!

Kaijun / Acer-V5-573G-Hackintosh

10.12 compatibility #42

News