Sleep/Shutdown Issue & Solution

[Kaijun]

_Issue Description_

The laptop can't shutdown/restart after running continually for a long time. (for example watching a 2-hours long movie which stops the laptop to sleep automatically)

and also when i set the "energy saver": display never turns off(and also never sleep), then after several hours, if i click the shutdown button, the laptop can't shut down.(normally it can)

what's stranger is that when i click the restart button, but the laptop shut down actually(but it seems to be not really same as the normal shutdown, it takes a little bit more time)...

and if the laptop runs for a several hours and go to sleep automatically, then it can't be woke up from the sleep state, yeah sleep to death...

---

_Solution_

Flash the Intel Management Engine Firmware in the Repo. Thank @savvamitrofanov for his solution commented in this issue https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-225346907

It has been almost 2 years since we had this problem. Finally we made some progresses!

---

_Temporary Solution_

Force the laptop to sleep manually after the start of your laptop. After the power light turns orange, then wake the laptop up. After that, all the shutdown/sleep behaviours will be normal. The phenomenon as the description mentioned won't appear again.

[Kaijun]

join the discussion and share your experience! :smile:

[ghost]

I know about this solution , but sometimes it doesn't help.

[Kaijun]

At least it works for me currently... Should test it for more days 2014年9月15日 上午11:22于 "virusak" notifications@github.com写道：

I know about this solution , but sometimes it doesn't help.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-55568257 .

[Majkwin]

Talking about issues. Sometimes i got this:

http://i43.photobucket.com/albums/e363/Majkwin/IMG_0039_zps7d37f7d2.jpg

Graphics bugs are visible on the top bar, and on icons appearing while changing volume/brightness. Usually restart helps.

[Kaijun]

i haven't even met that. but some users have the same problem. but a solution is replacing the old version of AppleIntelFramebufferAzul.kext. i don't know if they do some researches, i think injecting EDID or change the ig-platform-id may help. i can't test for you all, because it's totally fine with my laptop

[Kaijun]

AppleIntelFramebufferAzul.kext have a try. do not forget to backup your current AppleIntelFramebufferAzul.kext

[Majkwin]

So i should change only this one kext?

W dniu czwartek, 18 września 2014 Kaijun Chen notifications@github.com napisał(a):

i haven't even met that. but some users have the same problem. but a solution is replacing the old version of AppleIntelFramebufferAzul.kext. i don't know if they do some researches, i think injecting EDID or change the ig-platform-id may help. i can't test for you all, because it's totally fine with my laptop

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-56014171 .

[Kaijun]

ofc. but it may not be the best solution.

[Majkwin]

@Kaijun , which color profile are You using?

W dniu czwartek, 18 września 2014 Kaijun Chen notifications@github.com napisał(a):

ofc. but it may not be the best solution.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-56014452 .

[Kaijun]

i didn't change the color layout. but i have adjusted that manually for my extended display.

[Majkwin]

Hmmm, i don't even have that kext in library/extensions

[Kaijun]

it's in /System/Library/Extensions/ actually

Herzliche Grüße / Best regards, Kaijun Chen

2014-09-18 15:50 GMT+02:00 Majkwin notifications@github.com:

Hmmm, i don't even have that kext in library/extensions

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-56040480 .

[Majkwin]

After change I've hot lags preety much everywhere, even after restoring original kext.

[Kaijun]

lol sry i have no idea…

[Majkwin]

Another issue - sometimes when i plug in headphones/external speakers audio is still playing through built-in speakers (it happens another way too - after pluging out headphones there is no audio)

BTW, @Kaijun have you tried enabling 750M? Is it even possible?

[ghost]

Hi Majkwin - as for sound I have this issue too, sleep helps to resolve it.

[Kaijun]

yeah just sleep and wake up immediately. Are you guys using the patch "on the fly" mode? It may be the problem of clover I think. Because preciously when I was using the patched AppleHDA.kext, there was no such kind of problem. 2014年9月26日 上午9:45于 "virusak" notifications@github.com写道：

Hi Majkwin - as for sound I have this issue too, sleep helps to resolve it.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-56929799 .

[Majkwin]

Today after working for about 3h, OSX had problems with shutting down, but after all laptop turned off. The only problem is that it can't turn on again. Be sure to backup your data quite often.

[Kaijun]

@Majkwin the laptop can't turn on anymore???

[Majkwin]

No, just some system files got corrupted. Unfortunately I was forced to reinstall whole system and then restore from time machine backup.

[Kaijun]

Sometimes I just only got the bootloader corrupted, so I'm always preparing a Clover USB stick for fixing the bootloader anytime 2014年10月2日 上午11:10于 "Majkwin" notifications@github.com写道：

No, just some system files got corrupted. Unfortunately I was forced to reinstall whole system and then restore from time machine backup.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-57602220 .

[Majkwin]

It did't help either

W dniu czwartek, 2 października 2014 Kaijun Chen notifications@github.com napisał(a):

Sometimes I just only got the bootloader corrupted, so I'm always preparing a Clover USB stick for fixing the bootloader anytime 2014年10月2日 上午11:10于 "Majkwin" <notifications@github.com javascript:_e(%7B%7D,'cvml','notifications@github.com');>写道：

No, just some system files got corrupted. Unfortunately I was forced to reinstall whole system and then restore from time machine backup.

— Reply to this email directly or view it on GitHub < https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-57602220>

.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-57603065 .

[vasil-boshnyakov]

There is a new BIOS version (2.29) with this description:

Fix system sometime shutdown by PECI read fail in Win PE

Do you think we should update BIOS to it?

[ghost]

It may fix shutdown issue without DSDT

[Majkwin]

Who is brave enough to try?

W dniu piątek, 24 października 2014 virusak notifications@github.com napisał(a):

It may fix shutdown issue without DSDT

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-60366239 .

[Kaijun]

@theguild @virusak @Majkwin i would have a try and extract/modify a new DSDT, but later after finishing today's homework :smile:

[Kaijun]

@virusak @Majkwin @theguild done. check here

upgrade your bios and have a try.

(But i didn't see any obvious difference in the new version, don't know if it's helpful for fixing the problems)

[Majkwin]

They're in the Clover/ACPI/patched location, right?

[Kaijun]

replace the files in /EFI/Clover/ACPI/patched (except SSDT.aml) with the new DSDT/SSDTs here

[Majkwin]

Ok, I updated and unfortunately there are some problems. Loading now takes something about 20s (on 2.28 about 11s, so there is a huge difference) and brightnest control doesn’t work :(

Wiadomość napisana przez Kaijun Chen notifications@github.com w dniu 24 paź 2014, o godz. 17:20:

replace the files in /EFI/Clover/ACPI/patched (except SSDT.aml) with the new DSDT/SSDTs here https://github.com/Kaijun/Acer-V5-573G-Hackintosh/tree/master/DSDT/DSDT-For-BIOS-V2.29/Compiled%20AML — Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-60401884.

[Kaijun]

i didn't recognise any difference in loading. it's totally same with me.

and brightnest control works, try fn+f12, i just forgot to add the fn+:left_right_arrow: control.

[Majkwin]

F10 and F12 works. Can you tell me in which file I can change it?

W dniu piątek, 24 października 2014 Kaijun Chen notifications@github.com napisał(a):

i didn't recognise any difference in loading. it's totally same with me.

and brightnest control works, try fn+f12, i just forgot to add the fn+[image: :left_right_arrow:] control.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-60454001 .

[Majkwin]

@Kaijun , you don't have any problems with 2.29 and those dsdt? I have lags when I'm waking up PC after sleep. Only clean restart helps :(

EDIT: I just returned to DSDT from 2.28 Bios and everything works fine - faster boot and no lags after waking up from sleep

[Kaijun]

no i don't have such problems.

and also i didn't see any fixes/improvements in v2.29 yet, the shutdown problem still exists.

[Majkwin]

You sure You uploaded proper files in 2.29 dsdt section? Like i wrote, on new files I’m getting bugs which i don’t have on older ones. Now I’m on 2.29 bios with old dsdt files

Wiadomość napisana przez Kaijun Chen notifications@github.com w dniu 26 paź 2014, o godz. 00:12:

no i don't have such problems.

and also i didn't see any fixes/improvements in v2.29 yet, the shutdown problem still exists.

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-60499250.

[Kaijun]

@Majkwin i didn't find any bugs except i forgot adding the FN control. if you just describe the phenomenon, but not the concrete log or something which can help debugging, then i don't know what i did wrong and how to fix.

PS: I'm not pushing anybody to update the newest Version before it's fully tested.

[Majkwin]

Hi Has someone managed to do something in this topic? Shutdown and audio issues are the only 2 that have left to fix.

[Majkwin]

@Kaijun, don't you think this has sth to do with audio? After turning on computer there is no problem with sound ( changing built in speakera <-> line out) until it goes to sleep mode. After that I have problems with line out, but simultaneously shutdown issue drops. Maybe modified applehda kext is bad?

[Kaijun]

Sorry I'm a little bit busy currently and didn't read your posts on Github. I also noticed this annoying issue, but I already have read a thread about how to fix this issue. Would have a try until I get rid of my current stuffs... So be a little bit patient, maybe this weekend :) On Jan 6, 2015 10:53 PM, "Majkwin" notifications@github.com wrote:

@Kaijun https://github.com/Kaijun, don't you think this has sth to do with audio? After turning on computer there is no problem with sound ( changing built in speakera <-> line out) until it goes to sleep mode. After that I have problems with line out, but simultaneously shutdown issue drops. Maybe modified applehda kext is bad?

— Reply to this email directly or view it on GitHub https://github.com/Kaijun/Acer-V5-573G-Hackintosh/issues/6#issuecomment-68940778 .

[Kaijun]

@Majkwin i just tried but it did't even work... the temporary solution is just re-sleeping the laptop and then the sound will be correct...

[ghost]

@Kaijun So have you soluted the problem? My Laptop is Acer R7, also have the same problems that can't shutdown when running too long times.

[Kaijun]

@sintonwong haven't found the solution yet :'(

[savvamitrofanov]

Update ME region to the actual revision. As i know 9.5.15.1730 has huge problem which affects pm...

[Kaijun]

@savvamitrofanov ME region?

[savvamitrofanov]

@Kaijun , yep , intel management engine uefi region. you can download firmware suitable for yours ME and tools for uefi shell from here http://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html. Just for me it solved all problems with shutdown/sleep/restart after long,heavy load on my haswell laptop Asus X200LA you need first download tools , as expected you need 9.5 tools, then take from this package meinfo.efi and check your me revision from uefi shell, then download firmware update from win-raid, then flash from uefi shell using fwupdlcl.efi like this "fwupdlcl -F FW.bin"

[zwj0571]

@savvamitrofanov wonderfull idea! so if i update ME, the shutdown issue in win10 can also be solved, right?

[zwj0571]

@savvamitrofanov when i try to download any file from the web you offered, it returns a "ERR_CONNECTION_RESET", which means I can download any thing. would please supply the tools I need to upgrade my ME

[ghost]

I've downloaded this file https://drive.google.com/file/d/0BwTusS8Rc47_Um1yTUlwM3lucmM/view?usp=sharing I mean archive for me region. But I have no idea what to do with it.

[Kaijun]

@virusak do as @savvamitrofanov posted. I'll give a try soon

[Kaijun]

@savvamitrofanov executing meinfo.efi has following result:

definitely 9.5.x, But still not sure which firmware i should flash...

Consumer Systems? Corporate Systems? Mac?