wifijt
commented
2 years ago Here is the YAML file:
`substitutions:
name: erikas-desk-bulb # CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE. RENAME YAML FILE TO SAME NAME.
USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_). USE ONLY LOWER CASE LETTERS.
friendly_name: Erikas Desk Bulb # CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE
esp8266: # https://esphome.io/components/esp8266.html board: esp01_1m restore_from_flash: true
framework: # provides updated PWM logic per https://github.com/esp8266/Arduino/pull/7231 version: 3.0.2 # https://github.com/esp8266/Arduino/releases platform_version: 3.2.0 # https://github.com/platformio/platform-espressif8266/releases/
external_components:
-
source: type: git url: https://github.com/KaufHA/kauf-rgbww-bulbs refresh: 0s
kauf_rgbww and light are required external components. If you don't want to use them, you should use kauf-bulb-minimal.yaml instead of kauf-bulb.yaml
web_server is not required, it just adds the version number to the web interface and also a warning about not flashing WLED or tasmota-minimal.
web_server_base is not required, it just makes the OTA system error out if wled or minimal are found in an uploaded firmware filename.
components: [kauf_rgbww,light,web_server,web_server_base]
esphome:
name: $name
project: name: "kauf.rgbww" version: "1.72"
on_boot: then:
- lambda: |-
// restore light state per setting. Default is to restore previous state so we don't need an action for that.
if (id(select_boot_state).state == "Always On - Last Value") {
auto call = id(kauf_light).turn_on();
call.perform();
}
else if (id(select_boot_state).state == "Always On - Bright White") {
auto call = id(kauf_light).turn_on();
call.set_color_mode(ColorMode::COLOR_TEMPERATURE);
call.set_color_temperature(150);
call.set_brightness(1.0);
call.perform();
}
else if (id(select_boot_state).state == "Always Off") {
auto call = id(kauf_light).turn_off();
call.perform();
}
// turn on WLED if effect is selected
if ( id(effect).state == "WLED / DDP" ) { id(kauf_light)->set_use_wled(); }button:
- platform: restart id: restart_button name: $friendly_name Restart Firmware entity_category: diagnostic disabled_by_default: true
wifi:
ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED
ssid: !secret wifi_ssid password: !secret wifi_pass
# Uncomment below to set a static IPmanual_ip:
static_ip: !secret kauf_bulb_rgb_ip_address
gateway: !secret wifi_gateway
subnet: !secret wifi_subnet
dns1: !secret wifi_dns1
use_address allows wireless programming through dashboard.
Set to the bulb's IP Address. Remove after programming.
use_address: 192.168.86.244
default is 20, 17 is recommended.
output_power: 17
using fast_connect as default since it is required for hidden networks.
feel free to change or override.
fast_connect: true
logger: # Enable logging
baud_rate: 0 # Disable UART logging since TX pad not easily available
api: # Enable Home Assistant API
password: !secret api_password # optional password field for Home Assistant API.
ota:
password: !secret ota_password # optional password for OTA updates.
debug: # outputs additional debug info when logs start
web_server: # web server allows access to device with a web browser
auth: # optional login details for web interface
username: admin
password: !secret web_server_password
PWM outputs for each LED channel
output:
- platform: esp8266_pwm pin: GPIO4 frequency: 1000 Hz id: pwm_red
- platform: esp8266_pwm pin: GPIO12 frequency: 1000 Hz id: pwm_green
- platform: esp8266_pwm pin: GPIO14 frequency: 1000 Hz id: pwm_blue
- platform: esp8266_pwm pin: GPIO5 frequency: 1000 Hz id: pwm_cw
- platform: esp8266_pwm pin: GPIO13 frequency: 1000 Hz id: pwm_ww
light:
Additive RGB light for Warm White
- platform: kauf_rgbww id: warm_rgb entity_category: config default_transition_length: 0ms aux: true name: $friendly_name Warm RGB
Additive RGB light for Cold White
- platform: kauf_rgbww id: cold_rgb entity_category: config default_transition_length: 0ms aux: true name: $friendly_name Cold RGB
Main RGBWW light
- platform: kauf_rgbww id: kauf_light default_transition_length: 250ms name: $friendly_name red: pwm_red green: pwm_green blue: pwm_blue warm_white: pwm_ww cold_white: pwm_cw warm_rgb: warm_rgb cold_rgb: cold_rgb
select:
default light state on boot
-
platform: template name: $friendly_name Power On State id: select_boot_state optimistic: true options:
- "Restore Power Off State"
- "Always On - Last Value"
- "Always On - Bright White"
- "Always Off"
defaulting to always on is nice so you know new bulbs are working
initial_option: "Always On - Bright White" restore_value: true icon: mdi:restart-alert set_action:
- script.execute: save_changes entity_category: config
-
platform: template name: $friendly_name Effect id: effect optimistic: true options:
-
"None"
-
"WLED / DDP" initial_option: "None" restore_value: true icon: mdi:string-lights set_action:
-
lambda: |- if ( x == "None" ) { id(kauf_light)->clr_use_wled(); } if ( x == "WLED / DDP" ) { id(kauf_light)->set_use_wled(); }
-
script.execute: save_changes
entity_category: config
-
sensor:
- platform: uptime name: $friendly_name Uptime update_interval: 60s entity_category: diagnostic disabled_by_default: true
Send IP Address to HA. Disabled by default, not as important now that Home Assistant provides link.
text_sensor:
- platform: wifi_info ip_address: name: $friendly_name IP Address entity_category: diagnostic disabled_by_default: true
script:
- id: save_changes
mode: restart
then:
- delay: 3s
- lambda: 'global_preferences->sync();'`
KaufHA
Just tried to flash a bulb using the stock YAML file and got this error:
In file included from src/esphome/components/restart/button/restart_button.h:3, from src/esphome/components/restart/button/restart_button.cpp:1: src/esphome/components/restart/button/restart_button.cpp: In member function 'virtual void esphome::restart::RestartButton::dump_config()': src/esphome/components/button/button.h:11:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 11 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/restart/button/restart_button.cpp:17:37: note: in expansion of macro 'LOG_BUTTON' 17 | void RestartButton::dump_config() { LOG_BUTTON("", "Restart Button", this); } | ^~~~~~~~~~ In file included from src/esphome/components/template/select/template_select.h:3, from src/esphome/components/template/select/template_select.cpp:1: src/esphome/components/template/select/template_select.cpp: In member function 'virtual void esphome::template_::TemplateSelect::dump_config()': src/esphome/components/select/select.h:13:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 13 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/template/select/template_select.cpp:64:3: note: in expansion of macro 'LOG_SELECT' 64 | LOG_SELECT("", "Template Select", this); | ^~~~~~~~~~ Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/web_server/web_server.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/web_server_base/web_server_base.cpp.o In file included from src/esphome/components/uptime/uptime_sensor.h:4, from src/esphome/components/uptime/uptime_sensor.cpp:1: src/esphome/components/uptime/uptime_sensor.cpp: In member function 'virtual void esphome::uptime::UptimeSensor::dump_config()': src/esphome/components/sensor/sensor.h:13:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 13 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/uptime/uptime_sensor.cpp:31:36: note: in expansion of macro 'LOG_SENSOR' 31 | void UptimeSensor::dump_config() { LOG_SENSOR("", "Uptime Sensor", this); } | ^~~~~~~~~~ Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/wifi/wifi_component.cpp.o src/esphome/components/light/light_json_schema.cpp: In static member function 'static void esphome::light::LightJSONSchema::dump_json(esphome::light::LightState&, ArduinoJson::JsonObject)': src/esphome/components/light/light_json_schema.cpp:55:53: error: use of deleted function 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' 55 | JsonObject color = root.createNestedObject("color"); | ^ In file included from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.hpp:9, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.h:9, from src/esphome/components/json/json_util.h:8, from src/esphome/components/light/light_json_schema.h:7, from src/esphome/components/light/light_json_schema.cpp:1: .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonObject.hpp:40:7: note: 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' is implicitly deleted because the default definition would be ill-formed: 40 | class JsonObject : public Internals::JsonPrintable<JsonObject>, | ^~~~~~~~~~ .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonObject.hpp:40:7: error: 'ArduinoJson::Internals::NonCopyable::NonCopyable(const ArduinoJson::Internals::NonCopyable&)' is private within this context In file included from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonBuffer.hpp:11, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/JsonParser.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonBufferBase.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/DynamicJsonBuffer.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.h:9, from src/esphome/components/json/json_util.h:8, from src/esphome/components/light/light_json_schema.h:7, from src/esphome/components/light/light_json_schema.cpp:1: .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../Data/NonCopyable.hpp:17:3: note: declared private here 17 | NonCopyable(const NonCopyable&); | ^~~~~~~~~~~ src/esphome/components/light/light_json_schema.cpp: In static member function 'static void esphome::light::LightJSONSchema::parse_color_json(esphome::light::LightState&, esphome::light::LightCall&, ArduinoJson::JsonObject)': src/esphome/components/light/light_json_schema.cpp:98:36: error: use of deleted function 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' 98 | JsonObject color = root["color"]; | ^ In file included from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonVariantBase.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonVariant.hpp:13, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonBuffer.hpp:12, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/JsonParser.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonBufferBase.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/DynamicJsonBuffer.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.h:9, from src/esphome/components/json/json_util.h:8, from src/esphome/components/light/light_json_schema.h:7, from src/esphome/components/light/light_json_schema.cpp:1: .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonVariantCasts.hpp:44:16: note: after user-defined conversion: 'ArduinoJson::Internals::JsonVariantCasts<TImpl>::operator ArduinoJson::JsonObject&() const [with TImpl = ArduinoJson::Internals::JsonObjectSubscript<const char*>]' 44 | FORCE_INLINE operator JsonObject &() const { Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o | ^~~~~~~~ src/esphome/components/light/light_json_schema.cpp: In static member function 'static void esphome::light::LightJSONSchema::parse_json(esphome::light::LightState&, esphome::light::LightCall&, ArduinoJson::JsonObject)': src/esphome/components/light/light_json_schema.cpp:144:54: error: use of deleted function 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' 144 | LightJSONSchema::parse_color_json(state, call, root); | ^ src/esphome/components/light/light_json_schema.cpp:75:87: note: initializing argument 3 of 'static void esphome::light::LightJSONSchema::parse_color_json(esphome::light::LightState&, esphome::light::LightCall&, ArduinoJson::JsonObject)' 75 | void LightJSONSchema::parse_color_json(LightState &state, LightCall &call, JsonObject root) { | ~~~~~~~~~~~^~~~ Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/wifi/wifi_component_esp8266.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/components/wifi_info/wifi_info_text_sensor.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/application.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/color.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/component.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/controller.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/entity_base.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/helpers.cpp.o Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/log.cpp.o *** [.pioenvs/erikas-desk-bulb/src/esphome/components/light/light_json_schema.cpp.o] Error 1 Compiling .pioenvs/erikas-desk-bulb/src/esphome/core/scheduler.cpp.o In file included from src/esphome/components/wifi_info/wifi_info_text_sensor.h:4, from src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:1: src/esphome/components/wifi_info/wifi_info_text_sensor.cpp: In member function 'virtual void esphome::wifi_info::IPAddressWiFiInfo::dump_config()': src/esphome/components/text_sensor/text_sensor.h:12:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 12 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:9:41: note: in expansion of macro 'LOG_TEXT_SENSOR' 9 | void IPAddressWiFiInfo::dump_config() { LOG_TEXT_SENSOR("", "WifiInfo IPAddress", this); } | ^~~~~~~~~~~~~~~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp: In member function 'virtual void esphome::wifi_info::ScanResultsWiFiInfo::dump_config()': src/esphome/components/text_sensor/text_sensor.h:12:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 12 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:10:43: note: in expansion of macro 'LOG_TEXT_SENSOR' 10 | void ScanResultsWiFiInfo::dump_config() { LOG_TEXT_SENSOR("", "WifiInfo Scan Results", this); } | ^~~~~~~~~~~~~~~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp: In member function 'virtual void esphome::wifi_info::SSIDWiFiInfo::dump_config()': src/esphome/components/text_sensor/text_sensor.h:12:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 12 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:11:36: note: in expansion of macro 'LOG_TEXT_SENSOR' 11 | void SSIDWiFiInfo::dump_config() { LOG_TEXT_SENSOR("", "WifiInfo SSID", this); } | ^~~~~~~~~~~~~~~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp: In member function 'virtual void esphome::wifi_info::BSSIDWiFiInfo::dump_config()': src/esphome/components/text_sensor/text_sensor.h:12:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 12 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:12:37: note: in expansion of macro 'LOG_TEXT_SENSOR' 12 | void BSSIDWiFiInfo::dump_config() { LOG_TEXT_SENSOR("", "WifiInfo BSSID", this); } | ^~~~~~~~~~~~~~~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp: In member function 'virtual void esphome::wifi_info::MacAddressWifiInfo::dump_config()': src/esphome/components/text_sensor/text_sensor.h:12:3: warning: 'nonnull' argument 'this' compared to NULL [-Wnonnull-compare] 12 | if ((obj) != nullptr) { \ | ^~ src/esphome/components/wifi_info/wifi_info_text_sensor.cpp:13:42: note: in expansion of macro 'LOG_TEXT_SENSOR' 13 | void MacAddressWifiInfo::dump_config() { LOG_TEXT_SENSOR("", "WifiInfo Mac Address", this); } | ^~~~~~~~~~~~~~~ src/esphome/components/web_server/web_server.cpp: In member function 'std::string esphome::web_server::WebServer::sensor_json(esphome::sensor::Sensor*, float)': src/esphome/components/web_server/web_server.cpp:351:4: error: no matching function for call to 'build_json(esphome::web_server::WebServer::sensor_json(esphome::sensor::Sensor*, float)::<lambda(ArduinoJson::JsonObject)>)' 351 | }); | ^ In file included from src/esphome/components/web_server/web_server.cpp:8: src/esphome/components/json/json_util.h:20:13: note: candidate: 'const char* esphome::json::build_json(const json_build_t&, size_t*)' 20 | const char *build_json(const json_build_t &f, size_t *length); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:20:13: note: candidate expects 2 arguments, 1 provided src/esphome/components/json/json_util.h:22:13: note: candidate: 'std::string esphome::json::build_json(const json_build_t&)' 22 | std::string build_json(const json_build_t &f); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:22:44: note: no known conversion for argument 1 from 'esphome::web_server::WebServer::sensor_json(esphome::sensor::Sensor*, float)::<lambda(ArduinoJson::JsonObject)>' to 'const json_build_t&' {aka 'const std::function<void(ArduinoJson::JsonObject&)>&'} 22 | std::string build_json(const json_build_t &f); | ~~~~~~~~~~~~~~~~~~~~^ src/esphome/components/web_server/web_server.cpp: In member function 'std::string esphome::web_server::WebServer::text_sensor_json(esphome::text_sensor::TextSensor*, const string&)': src/esphome/components/web_server/web_server.cpp:374:4: error: no matching function for call to 'build_json(esphome::web_server::WebServer::text_sensor_json(esphome::text_sensor::TextSensor*, const string&)::<lambda(ArduinoJson::JsonObject)>)' 374 | }); | ^ In file included from src/esphome/components/web_server/web_server.cpp:8: src/esphome/components/json/json_util.h:20:13: note: candidate: 'const char* esphome::json::build_json(const json_build_t&, size_t*)' 20 | const char *build_json(const json_build_t &f, size_t *length); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:20:13: note: candidate expects 2 arguments, 1 provided src/esphome/components/json/json_util.h:22:13: note: candidate: 'std::string esphome::json::build_json(const json_build_t&)' 22 | std::string build_json(const json_build_t &f); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:22:44: note: no known conversion for argument 1 from 'esphome::web_server::WebServer::text_sensor_json(esphome::text_sensor::TextSensor*, const string&)::<lambda(ArduinoJson::JsonObject)>' to 'const json_build_t&' {aka 'const std::function<void(ArduinoJson::JsonObject&)>&'} 22 | std::string build_json(const json_build_t &f); | ~~~~~~~~~~~~~~~~~~~~^ src/esphome/components/web_server/web_server.cpp: In lambda function: src/esphome/components/web_server/web_server.cpp:611:49: error: use of deleted function 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' 611 | light::LightJSONSchema::dump_json(*obj, root); | ^ In file included from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.hpp:9, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.h:9, from src/esphome/components/json/json_util.h:8, from src/esphome/components/web_server/web_server.cpp:8: .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonObject.hpp:40:7: note: 'ArduinoJson::JsonObject::JsonObject(const ArduinoJson::JsonObject&)' is implicitly deleted because the default definition would be ill-formed: 40 | class JsonObject : public Internals::JsonPrintable<JsonObject>, | ^~~~~~~~~~ .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonObject.hpp:40:7: error: 'ArduinoJson::Internals::NonCopyable::NonCopyable(const ArduinoJson::Internals::NonCopyable&)' is private within this context In file included from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../JsonBuffer.hpp:11, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/JsonParser.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/JsonBufferBase.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/DynamicJsonBuffer.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.hpp:7, from .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson.h:9, from src/esphome/components/json/json_util.h:8, from src/esphome/components/web_server/web_server.cpp:8: .piolibdeps/erikas-desk-bulb/ArduinoJson-esphomelib/src/ArduinoJson/Deserialization/../Data/NonCopyable.hpp:17:3: note: declared private here 17 | NonCopyable(const NonCopyable&); | ^~~~~~~~~~~ In file included from src/esphome/components/web_server/web_server.cpp:16: src/esphome/components/light/light_json_schema.h:17:55: note: initializing argument 2 of 'static void esphome::light::LightJSONSchema::dump_json(esphome::light::LightState&, ArduinoJson::JsonObject)' 17 | static void dump_json(LightState &state, JsonObject root); | ~~~~~~~~~~~^~~~ src/esphome/components/web_server/web_server.cpp: In member function 'std::string esphome::web_server::WebServer::light_json(esphome::light::LightState*)': src/esphome/components/web_server/web_server.cpp:612:4: error: no matching function for call to 'build_json(esphome::web_server::WebServer::light_json(esphome::light::LightState*)::<lambda(ArduinoJson::JsonObject)>)' 612 | }); | ^ In file included from src/esphome/components/web_server/web_server.cpp:8: src/esphome/components/json/json_util.h:20:13: note: candidate: 'const char* esphome::json::build_json(const json_build_t&, size_t*)' 20 | const char *build_json(const json_build_t &f, size_t *length); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:20:13: note: candidate expects 2 arguments, 1 provided src/esphome/components/json/json_util.h:22:13: note: candidate: 'std::string esphome::json::build_json(const json_build_t&)' 22 | std::string build_json(const json_build_t &f); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:22:44: note: no known conversion for argument 1 from 'esphome::web_server::WebServer::light_json(esphome::light::LightState*)::<lambda(ArduinoJson::JsonObject)>' to 'const json_build_t&' {aka 'const std::function<void(ArduinoJson::JsonObject&)>&'} 22 | std::string build_json(const json_build_t &f); | ~~~~~~~~~~~~~~~~~~~~^ src/esphome/components/web_server/web_server.cpp: In member function 'std::string esphome::web_server::WebServer::select_json(esphome::select::Select*, const string&)': src/esphome/components/web_server/web_server.cpp:755:4: error: no matching function for call to 'build_json(esphome::web_server::WebServer::select_json(esphome::select::Select*, const string&)::<lambda(ArduinoJson::JsonObject)>)' 755 | }); | ^ In file included from src/esphome/components/web_server/web_server.cpp:8: src/esphome/components/json/json_util.h:20:13: note: candidate: 'const char* esphome::json::build_json(const json_build_t&, size_t*)' 20 | const char *build_json(const json_build_t &f, size_t *length); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:20:13: note: candidate expects 2 arguments, 1 provided src/esphome/components/json/json_util.h:22:13: note: candidate: 'std::string esphome::json::build_json(const json_build_t&)' 22 | std::string build_json(const json_build_t &f); | ^~~~~~~~~~ src/esphome/components/json/json_util.h:22:44: note: no known conversion for argument 1 from 'esphome::web_server::WebServer::select_json(esphome::select::Select*, const string&)::<lambda(ArduinoJson::JsonObject)>' to 'const json_build_t&' {aka 'const std::function<void(ArduinoJson::JsonObject&)>&'} 22 | std::string build_json(const json_build_t &f); | ~~~~~~~~~~~~~~~~~~~~^ *** [.pioenvs/erikas-desk-bulb/src/esphome/components/web_server/web_server.cpp.o] Error 1 ========================= [FAILED] Took 52.18 seconds =========================