Closed grandaspanna closed 4 years ago
thanks, fixed it :)
Awesome. Did some rummaging/ruminating – would something like this be useful for simplifying things? Should be plug in and go.
USB->12V (up to 1.5A ish) converter on a single board with micro USB connector and header for FAN. TBH – I don’t know the exact connector used for chassis fans and what the pinouts are, but that’s easy enough to change.
Parts cost should be under $20 and I can assemble limited quantities at zero cost, where quantities is a number between 1 and 50. Any more than that and I’d probably throw it to an offshore manufacturer.
If it’s not obvious, the board is intended (designed is too strong a word) to sit inside the case and then the USB socket is accessible from the outside.
I haven’t really thought about dimensions/shape, but also easily enough sorted.
Oh, Nokia 3310 for reference 😉
Phil.
From: Adam Kelly notifications@github.com Sent: Wednesday, 15 January 2020 12:02 AM To: Kels316/DIY-Air-Purifier DIY-Air-Purifier@noreply.github.com Cc: grandaspanna sinking@bigpond.com; Author author@noreply.github.com Subject: Re: [Kels316/DIY-Air-Purifier] Small typo on link to USB cable (#1)
thanks, fixed it :)
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AM577RIX2CXIPVABHLDZ453Q5WZTVA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI4QQCY#issuecomment-574162955 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AM577RK5SOWDIAURZ2XYSMLQ5WZTVANCNFSM4KGP5RAQ .
I think I’m missing an attachment?
On 15 Jan 2020, at 10:49 am, grandaspanna notifications@github.com wrote:
Awesome. Did some rummaging/ruminating – would something like this be useful for simplifying things? Should be plug in and go.
USB->12V (up to 1.5A ish) converter on a single board with micro USB connector and header for FAN. TBH – I don’t know the exact connector used for chassis fans and what the pinouts are, but that’s easy enough to change.
Parts cost should be under $20 and I can assemble limited quantities at zero cost, where quantities is a number between 1 and 50. Any more than that and I’d probably throw it to an offshore manufacturer.
If it’s not obvious, the board is intended (designed is too strong a word) to sit inside the case and then the USB socket is accessible from the outside.
I haven’t really thought about dimensions/shape, but also easily enough sorted.
Oh, Nokia 3310 for reference 😉
Phil.
From: Adam Kelly notifications@github.com Sent: Wednesday, 15 January 2020 12:02 AM To: Kels316/DIY-Air-Purifier DIY-Air-Purifier@noreply.github.com Cc: grandaspanna sinking@bigpond.com; Author author@noreply.github.com Subject: Re: [Kels316/DIY-Air-Purifier] Small typo on link to USB cable (#1)
thanks, fixed it :)
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AM577RIX2CXIPVABHLDZ453Q5WZTVA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI4QQCY#issuecomment-574162955 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AM577RK5SOWDIAURZ2XYSMLQ5WZTVANCNFSM4KGP5RAQ .
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AF644ALQY7AWFLAVQ6MADMDQ5ZFPPA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI6RJ6Y#issuecomment-574428411, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF644AMEXKGG4GKBXSXHAEDQ5ZFPPANCNFSM4KGP5RAQ.
Weird. Gimme a few minutes, just grabbing a coffee.
On 15 Jan 2020, at 10:52 am, Adam Kelly notifications@github.com wrote:
I think I’m missing an attachment?
On 15 Jan 2020, at 10:49 am, grandaspanna notifications@github.com wrote:
Awesome. Did some rummaging/ruminating – would something like this be useful for simplifying things? Should be plug in and go.
USB->12V (up to 1.5A ish) converter on a single board with micro USB connector and header for FAN. TBH – I don’t know the exact connector used for chassis fans and what the pinouts are, but that’s easy enough to change.
Parts cost should be under $20 and I can assemble limited quantities at zero cost, where quantities is a number between 1 and 50. Any more than that and I’d probably throw it to an offshore manufacturer.
If it’s not obvious, the board is intended (designed is too strong a word) to sit inside the case and then the USB socket is accessible from the outside.
I haven’t really thought about dimensions/shape, but also easily enough sorted.
Oh, Nokia 3310 for reference 😉
Phil.
From: Adam Kelly notifications@github.com Sent: Wednesday, 15 January 2020 12:02 AM To: Kels316/DIY-Air-Purifier DIY-Air-Purifier@noreply.github.com Cc: grandaspanna sinking@bigpond.com; Author author@noreply.github.com Subject: Re: [Kels316/DIY-Air-Purifier] Small typo on link to USB cable (#1)
thanks, fixed it :)
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AM577RIX2CXIPVABHLDZ453Q5WZTVA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI4QQCY#issuecomment-574162955 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AM577RK5SOWDIAURZ2XYSMLQ5WZTVANCNFSM4KGP5RAQ .
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AF644ALQY7AWFLAVQ6MADMDQ5ZFPPA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI6RJ6Y#issuecomment-574428411, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF644AMEXKGG4GKBXSXHAEDQ5ZFPPANCNFSM4KGP5RAQ.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.
Trying again…
From: Adam Kelly notifications@github.com Sent: Wednesday, 15 January 2020 10:52 AM To: Kels316/DIY-Air-Purifier DIY-Air-Purifier@noreply.github.com Cc: grandaspanna sinking@bigpond.com; Author author@noreply.github.com Subject: Re: [Kels316/DIY-Air-Purifier] Small typo on link to USB cable (#1)
I think I’m missing an attachment?
On 15 Jan 2020, at 10:49 am, grandaspanna notifications@github.com wrote:
Awesome. Did some rummaging/ruminating – would something like this be useful for simplifying things? Should be plug in and go.
USB->12V (up to 1.5A ish) converter on a single board with micro USB connector and header for FAN. TBH – I don’t know the exact connector used for chassis fans and what the pinouts are, but that’s easy enough to change.
Parts cost should be under $20 and I can assemble limited quantities at zero cost, where quantities is a number between 1 and 50. Any more than that and I’d probably throw it to an offshore manufacturer.
If it’s not obvious, the board is intended (designed is too strong a word) to sit inside the case and then the USB socket is accessible from the outside.
I haven’t really thought about dimensions/shape, but also easily enough sorted.
Oh, Nokia 3310 for reference 😉
Phil.
From: Adam Kelly notifications@github.com Sent: Wednesday, 15 January 2020 12:02 AM To: Kels316/DIY-Air-Purifier DIY-Air-Purifier@noreply.github.com Cc: grandaspanna sinking@bigpond.com; Author author@noreply.github.com Subject: Re: [Kels316/DIY-Air-Purifier] Small typo on link to USB cable (#1)
thanks, fixed it :)
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AM577RIX2CXIPVABHLDZ453Q5WZTVA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI4QQCY#issuecomment-574162955 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AM577RK5SOWDIAURZ2XYSMLQ5WZTVANCNFSM4KGP5RAQ .
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AF644ALQY7AWFLAVQ6MADMDQ5ZFPPA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI6RJ6Y#issuecomment-574428411, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF644AMEXKGG4GKBXSXHAEDQ5ZFPPANCNFSM4KGP5RAQ.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AM577RLGGHUBD5ESYRFERG3Q5ZFYHA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI6RO7A#issuecomment-574429052 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AM577RKKRBTKZ7YAHIT245TQ5ZFYHANCNFSM4KGP5RAQ .
Ah, looks like attachments don't work via email.
Ah ok that looks interesting. For this version I’m trying to keep the components to things people can buy over-the-counter or online from local (Aus) suppliers. Definitely interested in another version that’s a bit more advanced for people who want additional features. This could be incorporated into that.
The fans use a 4 pin connector but I’m not sure what the actual name of it is, should be easy enough to find it on digikey or similar
Cheers,
Adam
http://www.phasezero.com.au/
Adam Kelly mailto:adam.kelly@phasezero.com.au
Director | Phase Zero Consulting Services http://www.phasezero.com.au/
0400 589 095 | www.phasezero.com.au <tel:+61 400 589 095>
On 15 Jan 2020, at 11:14 am, grandaspanna notifications@github.com wrote:
Ah, looks like attachments don't work via email. https://user-images.githubusercontent.com/54263749/72393832-3a373d00-3788-11ea-9e83-7bcfdf51154a.png — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AF644ANXXQ2N6BSCUNLP44DQ5ZIP5A5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI6TARY#issuecomment-574435399, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF644ALGG366SWWXHTD7WFTQ5ZIP5ANCNFSM4KGP5RAQ.
Cool. I'll make a couple up for my own purposes. Apart from the PCBs, I source the components from local suppliers when I do my own assembly. Purely for hobby purposes, I sell a few electronic bits on Tindie. Their fees and PayPal fees are a pain, but not aware of too many alternatives.
Got an old board with the same basic layout handy, so I'll test that. Found a local shop that has a twin pack of the Corsair fan and ordered those. The 3D printer yielded fruit overnight, so now on to getting the filter and putting it all together.
love it! Keen to see how the build goes with that board.
On 15 Jan 2020, at 1:55 pm, grandaspanna notifications@github.com wrote:
Cool. I'll make a couple up for my own purposes. Apart from the PCBs, I source the components from local suppliers when I do my own assembly. Purely for hobby purposes, I sell a few electronic bits on Tindie. Their fees and PayPal fees are a pain, but not aware of too many alternatives.
Got an old board with the same basic layout handy, so I'll test that. Found a local shop that has a twin pack of the Corsair fan and ordered those. The 3D printer yielded fruit overnight, so now on to getting the filter and putting it all together.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/Kels316/DIY-Air-Purifier/issues/1?email_source=notifications&email_token=AF644AJMZB7G3BCGEUV6QKLQ5Z3KTA5CNFSM4KGP5RA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI64AZQ#issuecomment-574472294, or unsubscribe https://github.com/notifications/unsubscribe-auth/AF644AKUKP5K6WW4F3ISNBTQ5Z3KTANCNFSM4KGP5RAQ.
Pics of this evening's testing. Given me enough confidence to order some bits.
nice one. If you have a model of the board you can flick me I’ll make a version of the fan housing that has a place to mount it, unless you’re already doing that?
See if this works. It's not necessarily final, but based on last night's testing, should work ok. air_filter_pcbv2.zip
awesome, thanks
There's just an extraneous character at the end of the link to the Jaycar 12V usb booster cable in the README. Got the 3D printer humming away...