check controllabilty of Open and Closed Switches

KevlarSky / TKET-Offeneces

A series of half thought through projects for the TKET Group

1 stars 0 forks source link

Open KevlarSky opened 7 months ago

KevlarSky commented 7 months ago

While opening, can you bypass the Open Switch to make the door stop

danjl1100 commented 7 months ago

Verified door contact switch behavior.

Switches are normally open (as pictured below)
When the door is present, the circuit is closed, shorting the chassis/rail to the "1 wire" for that sensor

When controller is executing "open door" sequence (door is raising), you can short the "fully open switch" wire to chassis and the door stops. Next command to controller starts "close door" sequence (door lowers)

Door_contact_switch