Add 5x5mm VQFN-32 with a nominal 3.15x3.15mm EP

[justyn]

Adds part VQFN-32-1EP_5x5mm_P0.5mm_EP3.15x3.15mm

This is used by the TI TLC5941, datasheet here: https://www.ti.com/lit/ds/slvs589d/slvs589d.pdf#page=33

This has been added to kicad-footprint-generator here.

Travis only fails on F6.3 "missing paste layer" for exposed pad.

---

:warning: Deprecation warning

On Oct 1, 2020 this repository, including issues and pull requests, will be archived and transferred to gitlab.com. In order for your pull requests and issues to be imported into GitLab you must set your email address on GitHub to public and use the same address for your GitLab account. Or login to GitLab at least once using the GitHub icon. Otherwise the importer can't correlate the account information and the issues/comments on GitLab will be owned by kicad-bot (importer documentation).

---

All contributions to the kicad library must follow the KiCad library convention

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items:

• [x] Provide a URL to a datasheet for the footprint(s) you are contributing
• [x] An example screenshot image is very helpful
• [x] If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
• [x] Check the output of the Travis automated check scripts - fix any errors as required
• [x] Give a reason behind any intentional library convention rule violation.

---

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above). And you can speed up the process even more by providing a dimensioned drawing of your contribution. A tutorial on how to do that is found here: https://forum.kicad.info/t/how-to-check-footprint-correctness/9279 (This is optional!)

[myfreescalewebpage]

@justyn is it linked to a symbol pull request ?

[justyn]

@myfreescalewebpage not currently, due to the lockdown. I can add a symbol once PRs are allowed again?

[myfreescalewebpage]

Yes, this will be on GitLab :)