Add Buzzer_Beeper/Indicator_PUI_AI-1440-TWT-24V-2-R

chschlue commented 4 years ago

https://www.shoppui.com/documents/AI-1440-TWT-24V-2-R.pdf https://github.com/KiCad/kicad-footprints/pull/2264 https://github.com/easyw/kicad-3d-models-in-freecad/pull/364

pui1 pui2

Thanks for creating a pull request to contribute to the KiCad libraries! Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers webside can not be accepted.

To speed up integration of your PR, please check the following items as you complete them:

[x] A screenshot of the model(s) aligned with KiCad footprint(s)
[x] Source files are contributed on the apropriate location
- Link to the package3d-source pull request or to the script pull request
[x] Step model submitted in 1:1 scale
[x] WRL model submitted in 1:2.54 scale
[x] 3D model alignment checked against KiCad footprint
[x] WRL model uses correct material properties
[x] Geometry check performed on the model

Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).

diegoherranz commented 3 years ago

Reviewed on the STEP model:

Checks done which look OK:

Body height 7.5mm - OK
Body diameter 13.8mm - OK
Pins diameter 0.7mm - OK
Pitch 7.6 mm - OK
Poisive pin: should be 5.5mm long and I've measured 5.53mm. I think it is because of the body-board separation. However, I think it is close enough.

Needs correcting:

[x] Negative pin should be 1.5mm shorter than the positive one
[x] Minor: Sound emission hole should be 1.4mm diameter as per the latest revision of the drawing: https://www.puiaudio.com/media/SpecSheet/AI-1440-TWT-24V-2-R.pdf

Thanks!

chschlue commented 3 years ago

Fixed.

diegoherranz commented 3 years ago

STEP reviewed and it all looks OK. However, the WRL doesn't load in KiCad. Am I doing something wrong? The one from the previous commit (a155e70) worked properly.

Thanks.

chschlue commented 3 years ago

Curious. Works for me (see screenshots above.) FreeCAD imports it as well.

diegoherranz commented 3 years ago

I've copied the file again and it all works OK. I probably did something stupid yesterday... Merging. Thanks.

KiCad / kicad-packages3D

Add Buzzer_Beeper/Indicator_PUI_AI-1440-TWT-24V-2-R #691