For the 3D model I supplemented the dimensions with measurements taken
from an actual device. In reality, the pads are a little bigger, and the
thickness a little less than the datasheet says.
Thanks for creating a pull request to contribute to the KiCad libraries!
Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.
To speed up integration of your PR, please check the following items as you complete them:
[x] A screenshot of the model(s) aligned with KiCad footprint(s)
[x] Source files are contributed on the apropriate location
[x] 3D model alignment checked against KiCad footprint
[x] WRL model uses correct material properties
[x] Geometry check performed on the model
Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).
Datasheet: https://www.mouser.com/datasheet/2/160/T5HN_T5HV-1662393.pdf
For the 3D model I supplemented the dimensions with measurements taken from an actual device. In reality, the pads are a little bigger, and the thickness a little less than the datasheet says.
Symbol: https://github.com/KiCad/kicad-symbols/pull/2754 Footprint: https://github.com/KiCad/kicad-footprints/pull/2293 3D model source: https://github.com/KiCad/kicad-packages3D-source/pull/282
Thanks for creating a pull request to contribute to the KiCad libraries! Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.
To speed up integration of your PR, please check the following items as you complete them:
Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).