Thanks for creating a pull request to contribute to the KiCad libraries!
Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.
To speed up integration of your PR, please check the following items as you complete them:
[x] A screenshot of the model(s) aligned with KiCad footprint(s)
[x] Source files are contributed on the apropriate location
[x] 3D model alignment checked against KiCad footprint
[ ] WRL model uses correct material properties
--> I used KiCadStepUp, but not sure the properties were correctly exported.
[x] Geometry check performed on the model
Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).
I have corrected the file names. The package size is 10.0x14.5, but the file names contained 10.0x15.0.
The corresponding footprint will be corrected with the right 3D model file path later.
Datasheet: http://www.issi.com/WW/pdf/43-46LQ32256A-AL.pdf
Screenshot:
![image](https://user-images.githubusercontent.com/56786174/91656646-61fbcb00-eaf5-11ea-9920-4670f4abbaad.png)
Package dimensions from the data sheet on page 7:![image](https://user-images.githubusercontent.com/56786174/91656114-04657f80-eaf1-11ea-8d2e-a01e3db08f7f.png)
Thanks for creating a pull request to contribute to the KiCad libraries! Remember you must be the legal owner of the 3D model! Models downloaded from a manufacturers website cannot be accepted.
To speed up integration of your PR, please check the following items as you complete them:
Be patient, we maintainers are volunteers with limited time and need to check your contribution against the datasheet. You can speed up the process by providing all the necessary information (see above).