evanshultz commented 5 years ago

Several points as I went through the library.

[ ] Some symbols have the up (D, C, etc.) and down (S, E, etc.) pins at 100mil in the X direction:

Others are right on the origin:

We should be consistent about this, but it needs to wait for v6.

Affected symbols:

Transistor_FET: -- CSD25302Q2 -- DMC2053UVT
[ ] Pin numbers are not always visible. Because we probably want this, even if it can be assumed on some packages like SOT-23, I think we should have it everywhere.
[ ] Show Pin Name can be unchecked.
[ ] Pin Name Offset doesn't matter, but making it 20 avoids KLC errors so why not? (There is some interaction here with Place Pin Names Inside.)
[x] Pin length isn't always 100mil and it could be to avoid KLC errors so, again, why not?
[x] This is harder to track down, but there are small differences between versions of transistors with the same polarity. For example, filled vs unfilled body diodes. Presence or not of the body diode is another one.

Here are some N-channel examples:

And P-channel:

evanshultz commented 5 years ago

evanshultz commented 5 years ago

1976 has been merged which, I believe, addressed the last two items above.

evanshultz commented 5 years ago

KiCad / kicad-symbols