search

KiCad / kicad-templates

KiCad project templates
Other
169 stars 135 forks source link

Add PCB backplate template for generic 83x58x33mm enclosure #30

Open alnunez opened 4 years ago

alnunez commented 4 years ago

PCB Backplane template for generic 83x58x33mm waterproof enclosure. Unbranded but very common and easily available in online markets with search term: "83x58x33mm enclosure".

They came in multiple options: gray cover, clear cover, with wall mounting tabs, etc. All of them have the same layout inside .

Some vendor mark is KH-F19, but there are a lot of them without markings. For example AK10019-A1 and its respective drawing here

brd

measurements

20200619_191956

20200619_192927

CLAassistant commented 4 years ago

CLA assistant check
All committers have signed the CLA.

poeschlr commented 4 years ago

There is no reason to include the netlist. To be honest with version 5 the netlist is no longer the suggested way to get information from the schematic to the layout. Use tools->update pcb from schematic (inside pcbnew) for this task.

Also, remove the footprint lib info cache file as that one is not a prject specific file but a file dependend on your personal setup.

Add at least one exact manufacturer information to the template description including a link to the datasheet you used to create this.

alnunez commented 4 years ago

There is no reason to include the netlist. To be honest with version 5 the netlist is no longer the suggested way to get information from the schematic to the layout. Use tools->update pcb from schematic (inside pcbnew) for this task.

Also, remove the footprint lib info cache file as that one is not a prject specific file but a file dependend on your personal setup.

Add at least one exact manufacturer information to the template description including a link to the datasheet you used to create this.

Done!