search

KinDR007 / VictronMPPT-ESPHOME

Victron Mppt charger ve.direct to esphome node
MIT License
267 stars 59 forks source link

Victron MPPT 150/45 #130

Closed Malcom111 closed 9 months ago

Malcom111 commented 9 months ago

The device type is shown as "unknown" If I debug the UART, the device type is declared as "xA073" which is not in the victron.cpp file-list. Can you integrate it into the list ?

It should be a MPPT 150/45

this will be helpful, thanks a lot.

[09:25:58][D][uart_debug:158]: <<< "Checksum\t\xD4"
[09:25:58][D][uart_debug:158]: <<< ":A4F1000010000000000C36B0000C36B00005B25E1161E0100FFFFFFFFFFFFFFFFFFFFFFFFFF06\n"
[09:25:58][D][uart_debug:158]: <<< ":A501000000F000000FFFFFFFFC41406140000000000910000000000DB000000290064223C0097\n"
[09:25:59][D][uart_debug:158]: <<< "\r\n"
[09:25:59][D][uart_debug:158]: <<< "PID\t0xA073\r\n"
[09:25:59][D][uart_debug:158]: <<< "FW\t161\r\n"
[09:25:59][D][uart_debug:158]: <<< "SER#\tHQ22424CX7V\r\n"
[09:25:59][D][uart_debug:158]: <<< "V\t52640\r\n"
[09:25:59][D][uart_debug:158]: <<< "I\t4100\r\n"
[09:25:59][D][uart_debug:158]: <<< "VPV\t57740\r\n"
[09:25:59][D][uart_debug:158]: <<< "PPV\t220\r\n"
[09:25:59][D][uart_debug:158]: <<< "CS\t3\r\n"
[09:25:59][D][uart_debug:158]: <<< "MPPT\t2\r\n"
[09:25:59][D][uart_debug:158]: <<< "OR\t0x00000000\r\n"
[09:25:59][D][uart_debug:158]: <<< "ERR\t0\r\n"
[09:25:59][D][uart_debug:158]: <<< "LOAD\tON\r\n"
[09:25:59][D][uart_debug:158]: <<< "H19\t27587\r\n"
[09:25:59][D][uart_debug:158]: <<< "H20\t15\r\n"
[09:25:59][D][uart_debug:158]: <<< "H21\t219\r\n"
[09:25:59][D][uart_debug:158]: <<< "H22\t647\r\n"
[09:25:59][D][uart_debug:158]: <<< "H23\t1154\r\n"
[09:25:59][D][uart_debug:158]: <<< "HSDS\t60\r\n"
KinDR007 commented 9 months ago

Tag for : SmartSolar MPPT 150|45 rev3 -> added closing the issue