Some values are not displayed Victron MPPT 150/45 and 100/20

[DerKlotz74]

Hello, I have the problem that some values are not supplied by the Victron. Please help. What is needed?

sensor:
  - platform: victron
    victron_id: victron150
    max_power_yesterday:
      name: "${device0} max power yesterday"
    max_power_today:
      name: "${device0} max power today"  
    panel_voltage:
      name: "${device0} panel voltage"
    panel_power:
      name: "${device0} panel power"
    battery_current:
      name: "${device0} panel current"
    load_current:
      name: "${device0} load current"
    battery_voltage:
      name: "${device0} battery voltage"
    min_battery_voltage:
      name: "${device0} min battery voltage" 
    max_battery_voltage:
      name: "${device0} max battery voltage" 
    number_of_charge_cycles:  
      name: "${device0} number of charge circles"
    number_of_full_discharges:
      name: "${device0} number of full discharges"
    amount_of_discharged_energy:
      name: "${device0} amount of discharged energy"
    amount_of_charged_energy:
      name: "${device0} amount of charged energy"  

[DerKlotz74]

Have an ESP32

[syssi]

Please enable the debug output of the uart component and provide some logs.

uart:
  id: uart_0
  baud_rate: 19200
  tx_pin: ${tx_pin}
  rx_pin: ${rx_pin}
  debug:
    direction: BOTH
    dummy_receiver: false
    after:
      delimiter: "\n"
    sequence:
      - lambda: UARTDebug::log_string(direction, bytes);

I assume your Victron device doesn't provide the missing measurements above and you have to simply remove the sensors from the YAML to get rid of the useless sensors without measurements.

[KinDR007]

Hi , sorry for delayed response. All values with N/A corespond for smartshunt or BVM these values are not available for MPPT's