search

Kiougar / luci-wrtbwmon

Bandwidth tracker for OpenWRT that uses wrtbwmon
https://github.com/pyrovski/wrtbwmon
MIT License
319 stars 56 forks source link

module 'luci.model.ipkg' not found #27

Open nixcamic opened 5 years ago

nixcamic commented 5 years ago

I'm running the latest openwrt snapshot, and followed the installation instructions listed on the page. Version 6.0 works fine (except for the layout being slightly skewed by the theme) but any later version just stays on loading... indefinitely.

Kiougar commented 5 years ago

Can you please provide more details?

What version of OpenWRT are you using? When you say versions later than 6.0, do you mean version 0.6.0 of this luci-wrtbwmon? Can you provide a screenshot of the loading screen? Is it possible to provide a copy of the logs in the console tab in your browser (if there are any)?

Thanks in advance!

nixcamic commented 5 years ago

I'm using the latest snapshot of OpenWRT, and yes 0.6.0 of luci-wrtbwmon, its just the loading screen that pops up normally right before the table is displayed. Unfortunately it was at a friends house that I had the problem, I have a similar router at home though and I'll see if I can reproduce the issue on it.

Virr commented 5 years ago

Can you please provide more details?

What version of OpenWRT are you using? When you say versions later than 6.0, do you mean version 0.6.0 of this luci-wrtbwmon? Can you provide a screenshot of the loading screen? Is it possible to provide a copy of the logs in the console tab in your browser (if there are any)?

Thanks in advance!

in console: 500 error here usage/check_dependency:1

and when I open /cgi-bin/luci/admin/network/usage/check_dependency

Failed to execute call dispatcher target for entry '/admin/network/usage/check_dependency'. The called action terminated with an exception: /usr/lib/lua/luci/controller/wrtbwmon.lua:24: module 'luci.model.ipkg' not found: no field package.preload['luci.model.ipkg'] no file './luci/model/ipkg.lua' no file '/usr/share/lua/luci/model/ipkg.lua' no file '/usr/share/lua/luci/model/ipkg/init.lua' no file '/usr/lib/lua/luci/model/ipkg.lua' no file '/usr/lib/lua/luci/model/ipkg/init.lua' no file './luci/model/ipkg.so' no file '/usr/lib/lua/luci/model/ipkg.so' no file '/usr/lib/lua/loadall.so' no file './luci.so' no file '/usr/lib/lua/luci.so' no file '/usr/lib/lua/loadall.so' stack traceback: [C]: in function 'require' /usr/lib/lua/luci/controller/wrtbwmon.lua:24: in function </usr/lib/lua/luci/controller/wrtbwmon.lua:22> (tail call): ?

Kiougar commented 5 years ago

Thanks @Virr for the details. I couldn't reproduce it myself but I pushed a fix nonetheless.

Can you try release v0.8.3?

Virr commented 5 years ago

Unfortunately, exactly the same.

I did

opkg install /tmp/luci-wrtbwmon_v0.8.3_all.ipk Upgrading luci-wrtbwmon on root from 0.8.2 to v0.8.3... Configuring luci-wrtbwmon

then rm /tmp/luci-indexcache

but nothing changed

Kiougar commented 5 years ago

Try running this as well to make sure the cache is completely clear:

rm -rf /tmp/luci-indexcache /tmp/luci-modulecache

Can you tell me which version of OpenWRT are you using? Also, can you provide the output of the following command?

opkg list-installed
Virr commented 5 years ago

rm -rf /tmp/luci-indexcache /tmp/luci-modulecache

after this command it works. Great! Thanks!

Kiougar commented 5 years ago

But I still cannot reproduce it with a clean image of OpenWRT 18.06.2

Can you answer my questions so that I can figure out the source of the problem?

Can you tell me which version of OpenWRT are you using? Also, can you provide the output of the following command?

opkg list-installed
rammurti84 commented 5 years ago

trying to install but getting below error root@myrouter:~# opkg install luci-wrtbwmon_v0.8.3_all.ipk ERROR: Dependency wrtbwmon of package luci-wrtbwmon cannot be found, try updating your package lists root@myrouter:~#

Martin8023 commented 4 years ago

you can remove ipkg = require "luci.model.ipkg" in the xx.lua, then make again. I guess it's because the luci version is different.

yearski commented 3 years ago

I ran into a similar module 'luci.model.ipkg' not found error. Mine was for luci-ddns, not luci-wrtbwmon, so it may be completely unrelated. My issue was that I use USB storage for an extroot overlay and when I upgraded OpenWRT the USB storage carried along some stale luci modules/config. I fixed it by deleting /usr/lib/lua/luci/ from the USB storage and then re-copying it from the "fresh" jffs partition. Just a possible explanation if @Virr is also using an external overlay.

dausruddin commented 3 years ago

I had same error, but with Argon theme config. But since this issue appeared first on Google , maybe this can help someone.

Solved by https://github.com/jerrykuku/luci-theme-argon/issues/151#issuecomment-735361584, the solution is to install luci-lib-ipkg. Eg: opkg install luci-lib-ipkg

sweet0416 commented 1 year ago

I had same error, but with Argon theme config. But since this issue appeared first on Google , maybe this can help someone.

Solved by jerrykuku/luci-theme-argon#151 (comment), the solution is to install luci-lib-ipkg. Eg: opkg install luci-lib-ipkg

Thank you bro ~

score76 commented 1 year ago

For me this happened when I tried to remove the luci-app-ntpc and ntpclient package. I wanted to replace it with ntpd instead. When you remove the packages you get the error, put them back and it works again. Repeatable.