Closed qiyanlong closed 2 months ago
make sure your radio sends 1000-2000 as a start. use your trims/range on RADIO.
On 13 Aug 2024, at 14:11, qiyanlong @.***> wrote:
I use futaba 16iz+ tbs crossfire lite,radio pwm default value is 1094-1933 . osd thr value show 9%.When i used b61 frame on osd alert radio throttle values is high. I can't arm. when i writing b60 frame ,osd thr value show 9% ,arm is ok 。
— Reply to this email directly, view it on GitHub https://github.com/KissUltra/firmware/issues/2, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUWY3NPPXCLWDVMFHAT52MTZRHZVPAVCNFSM6AAAAABMOEHSK6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGQ3DGMJZGQ4DSNQ. You are receiving this because you are subscribed to this thread.
I have four planes,one planes used kiss,three planes used bf ,b60 frame is ok .I want a model control all planes
change radio sends 1000-2000 unscientific
make NEW model.
On 13 Aug 2024, at 14:30, qiyanlong @.***> wrote:
I have four planes,one planes used kiss,three planes used bf ,b60 frame is ok .I want a model control all planes
— Reply to this email directly, view it on GitHub https://github.com/KissUltra/firmware/issues/2#issuecomment-2286139344, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUWY3NPDCE3SCSV2LX2CR7LZRH353AVCNFSM6AAAAABMOEHSK6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEOBWGEZTSMZUGQ. You are receiving this because you commented.
What you doing is WRONG. You must have separate model for quads/planes etc. Besides you are loosing 20% of your stick range, it’s wrong on so many levels.
change radio sends 1000-2000 unscientific
Again, make sure in data output tab u can see 1000-2000 range.
ok I try it
let me know how it goes. and better get on discord. link is in the gui. ---Cheers,AlexOn 13 Aug 2024, at 15:37, qiyanlong @.***> wrote: ok I try it
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
I don't think setting the radio range is a good idea。There are 9 and more channels that need to be set on Futaba.Some channels Range cannot be set to 2000 。currently using the b60 firmware
The throttle in betaflight can be set to a specific value. Have you considered adding a set travel range.
please do as you suggested. ---Cheers,AlexOn 13 Aug 2024, at 16:20, qiyanlong @.***> wrote: I don't think setting the radio range is a good idea。There are 9 and more channels that need to be set on Futaba.Some channels Range cannot be set to 2000 。currently using the b60 firmware
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
not gonna happen. u have radio. it has endpoints. you have trims. u do it on radio. radio must send 1000-2000 range. with all respect u are doing it wrong. make model. set endpoints right. and enjoy full potential. ---Cheers,AlexOn 13 Aug 2024, at 16:23, qiyanlong @.***> wrote: The throttle in betalight can be set to a specific value. Have you considered adding a set travel range.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
all channels for sticks must be 1000-2000. ---Cheers,AlexOn 13 Aug 2024, at 16:32, Alex Fedorov @.> wrote:not gonna happen. u have radio. it has endpoints. you have trims. u do it on radio. radio must send 1000-2000 range. with all respect u are doing it wrong. make model. set endpoints right. and enjoy full potential. ---Cheers,AlexOn 13 Aug 2024, at 16:23, qiyanlong @.> wrote: The throttle in betalight can be set to a specific value. Have you considered adding a set travel range.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
OK I will try it.Thanks
I use futaba 16iz+ tbs crossfire lite,radio pwm default value is 1094-1933 . osd thr value show 9%.used b61 frame on osd alert radio throttle values is high. I can't arm. writing b60 frame ,osd thr value show 9% ,arm is ok .is a bug?