✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet (#1657), waiting on official binaries (planned for beta 2) and pip support.
While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1815)
✨ Musllinux now defaults to musllinux_1_2. You can set the older musllinux_1_1 via config if needed. (#1817)
🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)
🛠 Respect the constraints file when building with pip, matching build (#1818)
🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)
✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet (#1657), waiting on official binaries (planned for beta 2) and pip support.
While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1815)
✨ Musllinux now defaults to musllinux_1_2. You can set the older musllinux_1_1 via config if needed. (#1817)
🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)
🛠 Respect the constraints file when building with pip, matching build (#1818)
🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)
📚 Speed up our readthedocs builds with uv, 26 seconds -> 6 seconds to install dependencies (#1816)
v2.17.0
11 March 2024
🌟 Adds the ability to inherit configuration in TOML overrides. This makes certain configurations much simpler. If you're overriding an option like before-build or environment, and you just want to add an extra command or environment variable, you can just append (or prepend) to the previous config. See the docs for more information. (#1730)
🌟 Adds official support for native arm64 macOS GitHub runners. To use them, just specify macos-14 as an os of your job in your workflow file. You can also keep macos-13 in your build matrix to build x86_64. Check out the new GitHub Actions example config.
✨ You no longer need to specify --platform to run cibuildwheel locally! Instead it will detect your platform automatically. This was a safety feature, no longer necessary. (#1727)
🛠 Removed setuptools and wheel pinned versions. This only affects old-style projects without a pyproject.toml, projects with pyproject.toml are already getting fresh versions of their build-system.requires installed into an isolated environment. (#1725)
🛠 Improve how the GitHub Action passes arguments (#1757)
🛠 Remove a system-wide install of pipx in the GitHub Action (#1745)
🐛 No longer will cibuildwheel override the PIP_CONSTRAINT environment variable when using the build frontend. Instead it will be extended. (#1675)
🐛 Fix a bug where building and testing both x86_86 and arm64 wheels on the same runner caused the wrong architectures in the test environment (#1750)
🐛 Fix a bug that prevented testing a CPython 3.8 wheel targeting macOS 11+ on x86_64 (#1768)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.
Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot show ignore conditions` will show all of the ignore conditions of the specified dependency
- `@dependabot ignore major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
- `@dependabot ignore minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
- `@dependabot ignore ` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore ` will remove all of the ignore conditions of the specified dependency
- `@dependabot unignore ` will remove the ignore condition of the specified dependency and ignore conditions
dependabot[bot]
commented
5 months ago
Bumps the actions group with 2 updates in the / directory: pypa/cibuildwheel and codecov/codecov-action.
Updates
pypa/cibuildwheelfrom 2.17 to 2.18Release notes
Sourced from pypa/cibuildwheel's releases.
Changelog
Sourced from pypa/cibuildwheel's changelog.
... (truncated)
Commits
711a3d0Bump version: v2.18.03873a1echore: update bump_version script6dd4f15docs: rust (#1816)44c4742feat: add Python 3.13 beta 1 (#1815)c021744feat: move defaultmusllinuxbuild tomusllinux_1_2(#1817)cf18014fix: do not pre-seed setuptools / wheel in virtual environment (#1819)3ea0a6cfix: respect constraints when building with pip (#1818)30a0dec[Bot] Update dependencies (#1812)988d512[pre-commit.ci] pre-commit autoupdate (#1813)98d57d9Merge pull request #1766 from Czaki/delocate_infoUpdates
codecov/codecov-actionfrom 4.1.0 to 4.4.0Release notes
Sourced from codecov/codecov-action's releases.
... (truncated)
Commits
6d79887chore(release): 4.4.0 (#1430)37364fabuild(deps-dev): bump@typescript-eslint/parserfrom 7.8.0 to 7.9.0 (#1428)2791a5cfix: remove GPG and run on spawn (#1426)b71af43build(deps): bump ossf/scorecard-action from 2.3.1 to 2.3.3 (#1420)29f97fcbuild(deps): bump github/codeql-action from 3.25.3 to 3.25.4 (#1421)645d2a5build(deps): bump actions/checkout from 4.1.4 to 4.1.5 (#1423)f691d46chore: Clarify isPullRequestFromFork (#1411)5ecb98achore(release): 4.3.1. (#1405)5a299d1fix: bypass token checks for forks and OIDC (#1404)dad251ddocs: main branch (#1396)Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show