search

KiwiHC16 / Abeille

Abeille pour Jeedom (Gateway ZiGate)
GNU Affero General Public License v3.0
60 stars 52 forks source link

Inclusion XIAOMI AQARA - MICROMODULE ON/OFF ZIGBEE 3.0 1250W SANS NEUTRE (SSM-U02) #1760

Closed KiwiHC16 closed 1 year ago

KiwiHC16 commented 3 years ago

https://community.jeedom.com/t/relais-sans-neutre-et-dimmable/44914/19

https://www.domadoo.fr/fr/peripheriques/5387-aqara-micromodule-onoff-zigbee-30-1250w-sans-neutre-6970504213302.html

KiwiHC16 commented 3 years ago

Pensez à la cagnotte: http://kiwihc16.free.fr/index.html#cagnotte Donate

La discussion doit être en relation directe avec le titre de l’issue. Ne pas avoir deux ou plus discussions dans une issue. Si la discussion change de sujet, fermer l’issue et en ouvrir une autre avec le sujet qui va bien.

Akim82 commented 3 years ago

Hello @KiwiHC16, voici les logs d'inclusion du micromodule "XIAOMI AQARA - MICROMODULE ON/OFF ZIGBEE 3.0 1250W SANS NEUTRE (SSM-U02)"

[2021-02-19 19:03:23][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=00, PacketType=0010
[2021-02-19 19:03:23][debug] Abeille1, Type=8010/Version, Appli=3, SDK=031D
[2021-02-19 19:03:40][debug] Abeille1, Type=004d/Device announce, Addr=11D4, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=00, Rejoin=02, [Modelisation]
[2021-02-19 19:03:40][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:0013 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:FFFD
[2021-02-19 19:03:40][debug] Abeille1, Type=004d/Device announce, Addr=11D4, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=80, [Modelisation]
[2021-02-19 19:03:40][debug] Abeille1, Type=8701/Route discovery confirm, MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->), Addr=0400
[2021-02-19 19:03:41][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:0013 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:FFFD
[2021-02-19 19:03:41][debug] Abeille1, Type=004d/Device announce, Addr=11D4, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=80, [Modelisation]
[2021-02-19 19:03:41][debug] Abeille1, Type=8701/Route discovery confirm, MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=00 (ZPS_EVENT_NONE->), Addr=0400
[2021-02-19 19:03:41][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=52, PacketType=0045
[2021-02-19 19:03:41][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:03:41][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:8005 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:41][debug] Abeille1, Type=8045/Active endpoints response, SQN=52, Status=00, ShortAddr=11D4, EndPointCount=02, EndPointList=; 01; F2, [Modelisation]
[2021-02-19 19:03:41][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=3C, PacketType=0100
[2021-02-19 19:03:41][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=3D, PacketType=0100
[2021-02-19 19:03:41][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=3E, PacketType=0100
[2021-02-19 19:03:42][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0045
[2021-02-19 19:03:42][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:42][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:42][debug] Abeille1, Type=8100/Read individual attribute response, SQN=3C, Addr=11D4, EP=01, ClustId=0000, AttrId=0004, AttrStatus=00, AttrDataType=42, AttrSize=0004
[2021-02-19 19:03:42][debug]   ManufacturerName='LUMI', trimmed='LUMI', {"Abeille1\/0EAE":{"time":1613741503,"ManufacturerName":"eWeLink"},"Abeille1\/FEE3":{"time":1613741704,"ManufacturerName":"eWeLink"},"Abeille1\/11D4":{"time":1613757822,"ManufacturerName":"LUMI"}}, [Modelisation]
[2021-02-19 19:03:43][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=53, PacketType=0045
[2021-02-19 19:03:43][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0045
[2021-02-19 19:03:43][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:43][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:43][debug] Abeille1, Type=8100/Read individual attribute response, SQN=3D, Addr=11D4, EP=01, ClustId=0000, AttrId=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012
[2021-02-19 19:03:43][debug]   ModelIdentifier='lumi.switch.l0agl1', trimmed='lumi.switch.l0agl1', [Modelisation]
[2021-02-19 19:03:44][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=54, PacketType=0045
[2021-02-19 19:03:44][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0041
[2021-02-19 19:03:44][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:44][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:03:44][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:8005 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:44][debug] Abeille1, Type=8045/Active endpoints response, SQN=53, Status=00, ShortAddr=11D4, EndPointCount=02, EndPointList=; 01; F2, [Modelisation]
[2021-02-19 19:03:44][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:03:44][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:8005 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:44][debug] Abeille1, Type=8045/Active endpoints response, SQN=54, Status=00, ShortAddr=11D4, EndPointCount=02, EndPointList=; 01; F2, [Modelisation]
[2021-02-19 19:03:45][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=55, PacketType=0041
[2021-02-19 19:03:45][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=56, PacketType=0045
[2021-02-19 19:03:45][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=3F, PacketType=0100
[2021-02-19 19:03:45][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:45][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=00, ClustId=0001
[2021-02-19 19:03:45][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:8001 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:45][debug] Abeille1, Type=8041/IEEE Address response, SQN=55, Status=00, ExtAddr=04CF8CDF3C8E0CA3, ShortAddr=11D4, NumberOfAssociatedDevices=00, StartIndex=00
[2021-02-19 19:03:45][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:03:45][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0000 cluster:8005 srcEndPoint:00 destEndPoint:00 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:45][debug] Abeille1, Type=8045/Active endpoints response, SQN=56, Status=00, ShortAddr=11D4, EndPointCount=02, EndPointList=; 01; F2, [Modelisation]
[2021-02-19 19:03:45][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:45][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:45][debug] Abeille1, Type=8100/Read individual attribute response, SQN=3F, Addr=11D4, EP=01, ClustId=0000, AttrId=0004, AttrStatus=00, AttrDataType=42, AttrSize=0004
[2021-02-19 19:03:45][debug]   ManufacturerName='LUMI', trimmed='LUMI', {"Abeille1\/0EAE":{"time":1613741503,"ManufacturerName":"eWeLink"},"Abeille1\/FEE3":{"time":1613741704,"ManufacturerName":"eWeLink"},"Abeille1\/11D4":{"time":1613757825,"ManufacturerName":"LUMI"}}, [Modelisation]
[2021-02-19 19:03:46][debug] processActionQueue(): action: {"when":1613757825,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:46][debug] processActionQueue(): action: {"when":1613757825,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:46][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=40, PacketType=0100
[2021-02-19 19:03:46][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=41, PacketType=0100
[2021-02-19 19:03:46][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=42, PacketType=0100
[2021-02-19 19:03:46][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:46][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:46][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:46][debug] Abeille1, Type=8100/Read individual attribute response, SQN=40, Addr=11D4, EP=01, ClustId=0000, AttrId=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012
[2021-02-19 19:03:46][debug]   ModelIdentifier='lumi.switch.l0agl1', trimmed='lumi.switch.l0agl1', [Modelisation]
[2021-02-19 19:03:46][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:46][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:46][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:46][debug] Abeille1, Type=8100/Read individual attribute response, SQN=42, Addr=11D4, EP=01, ClustId=0000, AttrId=0004, AttrStatus=00, AttrDataType=42, AttrSize=0004
[2021-02-19 19:03:46][debug]   ManufacturerName='LUMI', trimmed='LUMI', {"Abeille1\/0EAE":{"time":1613741503,"ManufacturerName":"eWeLink"},"Abeille1\/FEE3":{"time":1613741704,"ManufacturerName":"eWeLink"},"Abeille1\/11D4":{"time":1613757826,"ManufacturerName":"LUMI"}}, [Modelisation]
[2021-02-19 19:03:47][debug] processActionQueue(): action: {"when":1613757826,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:47][debug] processActionQueue(): action: {"when":1613757826,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:47][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=43, PacketType=0100
[2021-02-19 19:03:47][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=44, PacketType=0100
[2021-02-19 19:03:47][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=57, PacketType=0045
[2021-02-19 19:03:47][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:47][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:47][debug] Abeille1, Type=8002 (decoded but not processed - message unknown): status: 00 profile:0104 cluster:0000 srcEndPoint:01 destEndPoint:01 sourceAddressMode:02 srcAddress:11D4 destinationAddressMode:02 dstAddress:Ruche
[2021-02-19 19:03:47][debug] Abeille1, Type=8100/Read individual attribute response, SQN=43, Addr=11D4, EP=01, ClustId=0000, AttrId=0005, AttrStatus=00, AttrDataType=42, AttrSize=0012
[2021-02-19 19:03:47][debug]   ModelIdentifier='lumi.switch.l0agl1', trimmed='lumi.switch.l0agl1', [Modelisation]
[2021-02-19 19:03:48][debug] processActionQueue(): action: {"when":1613757827,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:48][debug] processActionQueue(): action: {"when":1613757827,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:48][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=45, PacketType=0100
[2021-02-19 19:03:48][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:48][debug] Abeille1, Type=8048/Leave indication, ExtAddr=04CF8CDF3C8E0CA3, RejoinStatus=00
[2021-02-19 19:03:49][debug] processActionQueue(): action: {"when":1613757828,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:49][debug] processActionQueue(): action: {"when":1613757828,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:49][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:50][debug] processActionQueue(): action: {"when":1613757829,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:50][debug] processActionQueue(): action: {"when":1613757829,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:50][debug] processActionQueue(): action: {"when":1613757829,"what":"configureNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE Start
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindShortToZigateBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritSetReportBatterie: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateEtat: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportEtat: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateLevel: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportLevel: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateButton: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritTemperatureBindShortToZigate: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE spiritTemperatureSetReport: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateIlluminance: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportIlluminance: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportIlluminanceXiaomi: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateOccupancy: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportOccupancy: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigateTemperature: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportTemperature: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindToZigatePuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportPuissanceLegrand: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE BindShortToSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE setReportSmokeHeiman: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick1: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick2: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick3: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE LivoloSwitchTrick4: Cmd not found, probably not an issue, probably should not do it
[2021-02-19 19:03:50][debug] Type=fct; ===> Configure NE End
[2021-02-19 19:03:50][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:51][debug] processActionQueue(): action: {"when":1613757830,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:51][debug] processActionQueue(): action: {"when":1613757830,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:51][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:51][debug] Abeille1, Type=004d/Device announce, Addr=50BA, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=80, Rejoin=00, [Modelisation]
[2021-02-19 19:03:52][debug] processActionQueue(): action: {"when":1613757831,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:52][debug] processActionQueue(): action: {"when":1613757831,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:52][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:53][debug] processActionQueue(): action: {"when":1613757832,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:53][debug] processActionQueue(): action: {"when":1613757832,"what":"mqqtPublish","parm0":"Abeille1\/11D4","parm1":"MACCapa","parm2":"MACCapa","parm3":"80"}
[2021-02-19 19:03:53][debug] processActionQueue(): action: {"when":1613757832,"what":"getNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:53][debug] processActionQueue(): action: {"when":1613757832,"what":"configureNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:53][debug] Type=fct; ===> Configure NE Start
[2021-02-19 19:03:53][debug] Type=fct; ===> Configure NE End
[2021-02-19 19:03:53][debug] processActionQueue(): action: {"when":1613757832,"what":"configureNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:53][debug] Type=fct; ===> Configure NE Start
[2021-02-19 19:03:53][debug] Type=fct; ===> Configure NE End
[2021-02-19 19:03:53][debug] Abeille1, Type=8000/Status, Status=14/Status 14 inconnu, SQN=00, PacketType=0100
[2021-02-19 19:03:53][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:53][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:03:54][debug] processActionQueue(): action: {"when":1613757833,"what":"configureNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:54][debug] Type=fct; ===> Configure NE Start
[2021-02-19 19:03:54][debug] Type=fct; ===> Configure NE End
[2021-02-19 19:03:54][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=58, PacketType=0045
[2021-02-19 19:03:54][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=59, PacketType=0043
[2021-02-19 19:03:54][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0041
[2021-02-19 19:03:54][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=01, ClustId=0000
[2021-02-19 19:03:54][debug] Abeille1, Type=8702/APS Data Confirm Fail, Status=F0 (MAC_ENUM_TRANSACTION_EXPIRED->Pending transaction has expired and data discarded), SrcEP=01, DestEP=0B, DestMode=02, DestAddr=11D4, SQN=07
[2021-02-19 19:03:54][debug] Abeille1, Type=004d/Device announce, Addr=50BA, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=80, Rejoin=00, [Modelisation]
[2021-02-19 19:03:55][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=5A, PacketType=0041
[2021-02-19 19:03:55][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0045
[2021-02-19 19:03:55][debug] Abeille1, Type=8702/APS Data Confirm Fail, Status=F0 (MAC_ENUM_TRANSACTION_EXPIRED->Pending transaction has expired and data discarded), SrcEP=01, DestEP=01, DestMode=02, DestAddr=11D4, SQN=09
[2021-02-19 19:03:56][debug] processActionQueue(): action: {"when":1613757835,"what":"getNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:56][debug] processActionQueue(): action: {"when":1613757835,"what":"getNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:56][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0045
[2021-02-19 19:03:57][debug] processActionQueue(): action: {"when":1613757836,"what":"getNE","addr":"Abeille1\/11D4"}
[2021-02-19 19:03:57][debug] processActionQueue(): action: {"when":1613757836,"what":"mqqtPublish","parm0":"Abeille1\/50BA","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:03:57][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0045
[2021-02-19 19:03:58][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0041
[2021-02-19 19:03:59][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0041
[2021-02-19 19:04:00][debug] processActionQueue(): action: {"when":1613757839,"what":"mqqtPublish","parm0":"Abeille1\/50BA","parm1":"IEEE","parm2":"Addr","parm3":"04CF8CDF3C8E0CA3"}
[2021-02-19 19:04:00][debug] Abeille1, Type=8000/Status, Status=A6/Status A6 inconnu, SQN=00, PacketType=0041
[2021-02-19 19:04:00][debug] Abeille1, Type=8701/Route discovery confirm, MACStatus=00 (ZPS_EVENT_NONE->), NwkStatus=D0 (ZPS_NWK_ENUM_ROUTE_DISCOVERY_FAILED->Attempt at route discovery has failed due to any reason except lack of table space), Addr=11D4
[2021-02-19 19:04:00][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=00, ClustId=0005
[2021-02-19 19:04:00][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=00, ClustId=0004
[2021-02-19 19:04:00][debug] Abeille1, Type=8011/APS data ACK, Status=00, DestAddr=50BA, DestEP=00, ClustId=8002
[2021-02-19 19:04:01][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=5B, PacketType=0045
[2021-02-19 19:04:01][debug] Abeille1, Type=8011/APS data ACK, Status=A7, DestAddr=11D4, DestEP=00, ClustId=0001
[2021-02-19 19:04:03][debug] Abeille1, Type=8000/Status, Status=00/Success, SQN=00, PacketType=0014
[2021-02-19 19:04:03][debug] Abeille1, Type=8014/Permit join status response: PermitJoinStatus=01
[2021-02-19 19:04:03][info ] Zigate1 en mode INCLUSION

AbeilleParser.log

Akim82 commented 3 years ago

Salut @KiwiHC16 , est ce que ces logs sont suffisants ? Merci.

KiwiHC16 commented 3 years ago 
[2021-02-19 19:03:40][debug] Abeille1, Type=004d/Device announce, Addr=11D4, ExtAddr=04CF8CDF3C8E0CA3, MACCapa=00, Rejoin=02, [Modelisation]
[2021-02-19 19:03:41][debug] Abeille1, Type=8045/Active endpoints response, SQN=52, Status=00, ShortAddr=11D4, EndPointCount=02, EndPointList=; 01; F2, [Modelisation]
[2021-02-19 19:03:42][debug]   ManufacturerName='LUMI', trimmed='LUMI', {"Abeille1\/0EAE":{"time":1613741503,"ManufacturerName":"eWeLink"},"Abeille1\/FEE3":{"time":1613741704,"ManufacturerName":"eWeLink"},"Abeille1\/11D4":{"time":1613757822,"ManufacturerName":"LUMI"}}, [Modelisation]
[2021-02-19 19:03:43][debug]   ModelIdentifier='lumi.switch.l0agl1', trimmed='lumi.switch.l0agl1', [Modelisation]
KiwiHC16 commented 3 years ago

Je viens de mettre un modele dans la version de dev. Sera dispo en beta mardi et en stable mardi en 8. Je devrais en recevoir un d ici une semaine pour finaliser le modele.

Akim82 commented 3 years ago

Merci @KiwiHC16

KiwiHC16 commented 3 years ago

J'en ai recu un. Il faut que je le branche.

Akim82 commented 3 years ago

Pour ma part j’ai mis à jour Abeille sur la dernière version stable et ça fonctionne nickel. Encore merci @KiwiHC16

KiwiHC16 commented 3 years ago 
lumi.switch.l0agl1

EP: 01, 242

Read On/Off: il repond.

Read Level: Il ne repond pas.

Repond au get IEEE
KiwiHC16 commented 3 years ago

Capture d’écran 2021-03-10 à 23 19 46

Capture d’écran 2021-03-10 à 23 21 43

KiwiHC16 commented 3 years ago

0x0000 Basic 0x0002 Temperature Config: device’s internal temperature, and for configuring under/over temperature alarms

0x0003 Identify 0x0004 Groups - Set/Read fonctionne. Mais commande On/Off sur groupe ne fonctionne pas. 0x0005 Scenes 0x0006 On/Off - Ok 0x0009 Alarms - ??? (temperature ?) 0x000A Time 0x0019: OTA 0x0021: ???

KiwiHC16 commented 3 years ago

Implémenter le parsing de reponse du cluster 0002.

Modele dans master.

Sera dans stable lundi en 15.

tcharp38 commented 3 years ago

https://community.jeedom.com/t/xiaomi-ssm-u02-jeedom-retour-etat-sur-inter-physique-ne-se-fait-pas-automatiquement/67754

tcharp38 commented 3 years ago

@steph38G Ton discovery est incomplet. Tous les boutons sont passés au vert ? Surtout le cluster 0006 STP

StephaneG38 commented 3 years ago

Je recommence

StephaneG38 commented 3 years ago

Pas tout au vert : discovery (2).txt

Capture d’écran 2021-09-21 143737

tcharp38 commented 3 years ago

En résumé

correct ?

StephaneG38 commented 3 years ago

Oui c'est ca Du coup j'ai mis "Get Etat" toute les minutes et cela fonctionne mais il faut attendre 1 minute quand j'ai utilisé l'inter physique Capture d’écran 2021-09-21 145637

tcharp38 commented 3 years ago

A tester switch.l0agl1.json.zip

-Decompresser dans "core/config/devices/switch.l0agl1

StephaneG38 commented 3 years ago

Ca va etre plus long car il faut que je démonte la prise pour l'inclusion Je le fait tout de suite

StephaneG38 commented 3 years ago

Je viens de faire le test : Idem avant cela ne fonctionne pas ( Statut à jour avec Jeedom mais pas le bouton physique). J'ai Get Statut a la place de Get Etat RQ : Pour refaire inclusion il suffit d'actionner plusieur fois l'inter physique donc pas besoin de démonter la prise !

tcharp38 commented 3 years ago

Via la page equipement/avancé peux tu lire la configuration du reporting image

et me filer le log parser correspondant

StephaneG38 commented 3 years ago

AbeilleParser (6).log

tcharp38 commented 3 years ago

Je ne vois aucune trace de l'execution de cette commande ni son retour.

Ex:

Requete envoyé (0122)

[2021-09-21 15:44:44] Abeille1, Type=8000/Status, Status=00/Success, SQN=BF, PacketType=0122

Reponse

[2021-09-21 15:44:44] Abeille1, Type=8002/Data indication, Status=00, ProfId=0104, ClustId=0006, SrcEP=01, DestEP=01, SrcAddrMode=02, SrcAddr=4E85, DestAddrMode=02, DestAddr=0000 [2021-09-21 15:44:44] FCF=18/Global/Serv->Cli, SQN=BF, cmd=09/Read Reporting Configuration Response [2021-09-21 15:44:44] Status=00/Success, Dir=00, AttrId=0000 [2021-09-21 15:44:44] Abeille1, Type=8122/Read reporting config, SQN=BF, Addr=4E85, EP=01, ClustId=0006, Status=00/Success [2021-09-21 15:44:44] AttrType=10, AttrId=0000, MinInterval=0, MaxInterval=0

On devrait au moins voir l'envoi de la requete 0122. La reponse que si le periph supporte.

tcharp38 commented 3 years ago

Pourras tu à l'occase me filer le package de logs juste apres inclusion ?

StephaneG38 commented 3 years ago

Quand je fait "interroger" il ne se passe rien : c'est normal ? Capture d’écran 2021-09-21 155944

tcharp38 commented 3 years ago

Rien de visible oui. Je n'ai rien fait pour ca. Mais ca doit resulter dans un changement dans le AbeilleCmd puis AbeilleParser Tu peux peut etre

StephaneG38 commented 3 years ago

je refait un inclusion ?

tcharp38 commented 3 years ago

Je faisais allusion a la lecture "configuration de rapport" donc fais juste "interroger"

StephaneG38 commented 3 years ago

ok

StephaneG38 commented 3 years ago

Log abeille.zip

tcharp38 commented 3 years ago

Pour info, quand je parle de package de logs, je fais allusion a celui que tu peux avoir via la page support/telecharger tout. Pas besoin de se prendre la tete à telecharger chaque log. D'autant + que certains ne sont pas accessibles facilement. Je regarde celui la et je reviens

tcharp38 commented 3 years ago

Je vois 2 requetes, vers 60F9 & 6AAE mais ce dernier est Orvibo, pas SSM_U02. Quoi qu'il en soit pas de reponse du périph donc je suppose qu'il ne supporte pas.

Du coup on retente une config pour voir si il n'y a pas une erreur

Je ne suis pas sur que ce periph supporte le "reporting" automatic quand il y a changement d'etat mais c'est ce que j'essaie de comprendre.

StephaneG38 commented 3 years ago

OK pour le package ! Par contre je ne comprend pas : Via la page EQ/avancé

tcharp38 commented 3 years ago

En cliquant sur l'equipement puis onglet "avancé". Jsuis con tu y etais déja.

StephaneG38 commented 3 years ago

Et je fais quoi ? Désolé je t'ai perdu !

StephaneG38 commented 3 years ago

Reconfigurer ?

StephaneG38 commented 3 years ago

AbeilleLogs-210921 (1).tar.gz

StephaneG38 commented 3 years ago

Désolé j'avais pas compris. J'ai donc fais reconfigurer puis les logs

tcharp38 commented 3 years ago

500 lignes de log c'est trop peu. Pense à passer à 5000 à l occase.

Max atteint (490 lignes

Sinon je vois quand meme ce que je cherche. La config du reporting n'est pas acceptée

[2021-09-21 16:49:59] Abeille1, Type=8120/Individual configure reporting response, SQN=01, Addr=60F9, EP=01, ClustId=0006, AttrId=0000, Status=C1

Satus C1 => Donc ca semble dire que ce periph ne sait pas faire de reporting automatic sur ce cluster 0006. Reste donc le polling :( Sauf si qq part tu trouves le contraire sur le net. Je suis preneur.

tcharp38 commented 3 years ago

On peut encore tenter autre chose; ca image

juste pour voir si il nous donne + d'infos et j'ai besoin du log Parser. Merci

StephaneG38 commented 3 years ago

J'avais pas modifié au bon endroit - désolé Capture d’écran 2021-09-21 170733

StephaneG38 commented 3 years ago

AbeilleParser (8).log

tcharp38 commented 3 years ago

Tu a fait "decouverte des attributs" ou "decouverte des attributs (extended)" ? J'ai l'impression que c'est la premiere

StephaneG38 commented 3 years ago

Oups Je me suis trompé Encore désolé

StephaneG38 commented 3 years ago

AbeilleParser (9).log

tcharp38 commented 3 years ago

Bon j'ai trouvé un bug dans la requete meme, donc ce que je cherche à faire ne peut pas fonctionner. Je pousse la correction dans la beta du jour.

StephaneG38 commented 3 years ago

Ok Je test donc demain ?

tcharp38 commented 3 years ago

Oui on reprend ca sur la beta 210921-BETA-3 mais rappelle toi qu'a ce stade il y a peu de chances que le reporting automatic fonctionne sur ce periph. J'ai rien vu sur le net à ce propos.

StephaneG38 commented 3 years ago

OK En tout cas merci pour ton aide et le temps consacré !! Désolé des petites erreurs commises. Je reste à ta dispo et je teste demain. Maintenant dans mon cas la remontée au bout de 1 minutes max reste acceptable pour des lumières bonne soirée Stéphane