New firmware on Arduino mega and RAMPS 1.4 error

[bojfik]

I installed Mainsail on my raspberry and after starting the new OS the system informed me that I need to upload the new firmware to the Arduino. I did it and it turned out that It's not working with RAMPS 1.4 If you do a firmware update on ArduinoMega, in my case with RAMPS 1.4 it won't work. After copying the printer.cfg, it turns out that there are incorrect readings on the housing of the temperature sensors, i.e. on the hotend and the bed. in addition to incorrect temperature readings on the sensors, I noticed that the print cooling fans are constantly on. in addition to incorrect temperature readings on the sensors, I noticed that the print cooling fans are constantly on. Which means something is wrong with the new pin map firmware Check it out I'm going back to Octopi and old firmware

[klipper-gitissuebot]

Hi @bojfik,

It did not look like there was a Klipper log file attached to this ticket. The log file has been engineered to answer common questions the Klipper developers have about the software and its environment (software version, hardware type, configuration, event timing, and hundreds of other questions).

Unfortunately, too many people have opened tickets without providing the log. That consumes developer time; time that would be better spent enhancing the software. If this ticket references an event that has occurred while running the software then the Klipper log must be attached to this ticket. Otherwise, this ticket will be automatically closed in a few days.

For information on obtaining the Klipper log file see: https://github.com/KevinOConnor/klipper/blob/master/docs/Contact.md

The log can still be attached to this ticket - just add a comment and attach the log to that comment.

Best regards, ~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being.

[bojfik]

klippy.log

[bojfik]

Starting Klippy... Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-l', '/tmp/klippy.log', '-a', '/tmp/klippy_uds'] Git version: 'v0.8.0-835-gcf6d302a' CPU: 4 core ARMv7 Processor rev 4 (v7l) Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]' Start printer at Mon Oct 19 19:26:34 2020 (1603131994.2 17.0) ===== Config file ===== [mcu] serial = /dev/ttyUSB0 pin_map = arduino restart_method = arduino

[mcu z] serial = /dev/ttyUSB1 pin_map = arduino restart_method = arduino

[printer] kinematics = corexy max_velocity = 250 max_accel = 2500 max_z_velocity = 25 max_z_accel = 300 square_corner_velocity = 5.0

[idle_timeout] gcode = TURN_OFF_HEATERS M84 ; disable steppers timeout = 1800

[stepper_x] step_pin = ar54 dir_pin = !ar55 enable_pin = !ar38 step_distance = 0.0125 endstop_pin = ^!ar2 position_min = 0 position_endstop = 350 position_max = 350 homing_speed = 100 second_homing_speed = 25 homing_retract_dist = 5 homing_positive_dir = true

[stepper_y] step_pin = ar60 dir_pin = !ar61 enable_pin = !ar56 step_distance = 0.0125 endstop_pin = ^!ar15 position_min = 0 position_endstop = 350 position_max = 350 homing_speed = 100 second_homing_speed = 25 homing_retract_dist = 5 homing_positive_dir = true

[stepper_z] step_pin = z:ar54 dir_pin = z:ar55 enable_pin = !z:ar38 step_distance = 0.00250 endstop_pin = ^!z:ar18 position_endstop = 0.85 position_max = 290 position_min = -10 homing_speed = 15.0 second_homing_speed = 1.5 homing_retract_dist = 3.0 homing_positive_dir = false

[stepper_z1] step_pin = z:ar60 dir_pin = !z:ar61 enable_pin = !z:ar56 step_distance = 0.00250

[stepper_z2] step_pin = z:ar46 dir_pin = z:ar48 enable_pin = !z:ar62 step_distance = 0.00250

[stepper_z3] step_pin = z:ar26 dir_pin = !z:ar28 enable_pin = !z:ar24 step_distance = 0.00250

[extruder] step_pin = ar26 dir_pin = ar28 enable_pin = !ar24 step_distance = 0.00180180 nozzle_diameter = 0.400 filament_diameter = 1.750 max_extrude_only_distance = 780 heater_pin = ar10 max_power = 1.0 sensor_type = EPCOS 100K B57560G104F sensor_pin = analog13 smooth_time = 3.0 min_extrude_temp = 170 min_temp = 0 max_temp = 270 control = pid pid_kp = 26.939 pid_ki = 1.403 pid_kd = 129.310

[probe] pin = ^!z:ar19 x_offset = 0.0 y_offset = 25.0 z_offset = 0.0 speed = 5.0 samples = 2 sample_retract_dist = 3.0 samples_result = average

[fan] pin = ar9 max_power = 1.0 shutdown_speed = 0 cycle_time = 0.010 hardware_pwm = false kick_start_time = 0.500

[heater_fan hotend_fan] pin = z:ar9 max_power = 1.0 shutdown_speed = 1.0 cycle_time = 0.010 hardware_pwm = false kick_start_time = 0.500 heater = extruder heater_temp = 75.0 fan_speed = 1.0

[controller_fan controller_fan] pin = z:ar10 max_power = 1.0 shutdown_speed = 0 cycle_time = 0.010 hardware_pwm = false kick_start_time = 0.500 idle_timeout = 30 idle_speed = 0.4 heater = extruder,heater_bed

[heater_bed] heater_pin = z:ar11 sensor_type = NTC 100K MGB18-104F39050L32 sensor_pin = z:analog15 smooth_time = 3.0 max_power = 0.65 min_temp = 0 max_temp = 110 control = pid pid_kp = 42.672 pid_ki = 1.823 pid_kd = 249.754

[verify_heater heater_bed] max_error = 120 check_gain_time = 60 hysteresis = 5 heating_gain = 2

[verify_heater extruder] max_error = 120 check_gain_time = 20 hysteresis = 5 heating_gain = 2

[homing_override] axes = z set_position_z = 0 gcode = G90 G0 Z10 F600 G28 X Y G0 X300.3 Y350 F3600 G28 Z G0 Z15 F1800 G0 X175 Y175 Z10 F3600

[quad_gantry_level] gantry_corners = -60,-10 410,360 points = 60,60 60,290 290,290 290,60 speed = 150 horizontal_move_z = 12 retries = 5 retry_tolerance = 0.0070 max_adjust = 15

[gcode_macro G32] gcode = {% if printer.toolhead.status == "Ready" %} G28 QUAD_GANTRY_LEVEL G28 Z0 G0 X125 Y125 Z20 F6000 {% else %} { printer.gcode.action_respond_info("G32 is disabled while printing!") } {% endif %}

[gcode_macro PRINT_START] gcode = M117 Homing... ; display message G28 ; home all axes G1 Z20 F3000 ; move nozzle away from bed M117 Preheat (Print) ; display message

[gcode_macro PRINT_END] gcode = M400 ; wait for buffer to clear G92 E0 ; zero the extruder G1 E-4.0 F3600 ; retract filament G91 ; relative positioning G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing TURN_OFF_HEATERS M107 ; turn off fan G1 Z5 F3000 ; move nozzle up 5mm G90 ; absolute positioning G0 X175 Y350 F3600 ; park nozzle at rear M117 Finished! ; display message

[gcode_macro UNLOAD_FILAMENT] gcode = {% if printer.toolhead.status == "Ready" %} M83 ; set extruder to relative G1 E10 F300 ; extrude a little to soften tip G1 E-780 F1800 ; retract filament completely M82 ; set extruder to absolute {% else %} { printer.gcode.action_respond_info("Filament unloading disabled while printing!") } {% endif %}

[gcode_macro LOAD_FILAMENT] gcode = {% if printer.toolhead.status == "Ready" %} M83 ; set extruder to relative G1 E750 F1800 ; quickly load filament to down bowden G1 E30 F300 ; slower extrusion for hotend path G1 E15 F150 ; prime nozzle with filament M82 ; set extruder to absolute {% else %} { printer.gcode.action_respond_info("Filament loading disabled while printing!") } {% endif %}

[display] lcd_type = st7920 cs_pin = EXP1_4 sclk_pin = EXP1_5 sid_pin = EXP1_3 encoder_pins = ^EXP2_3, ^EXP2_5 click_pin = ^!EXP1_2

[output_pin beeper] pin = EXP1_1

[board_pins] aliases = EXP1_1=ar37, EXP1_3=ar17, EXP1_5=ar23, EXP1_7=ar27, EXP1_9=, EXP1_2=ar35, EXP1_4=ar16, EXP1_6=ar25, EXP1_8=ar29, EXP1_10=<5V>, EXP2_1=ar50, EXP2_3=ar31, EXP2_5=ar33, EXP2_7=ar49, EXP2_9=, EXP2_2=ar52, EXP2_4=ar53, EXP2_6=ar51, EXP2_8=ar41, EXP2_10=

Extruder max_extrude_ratio=0.266081 Starting serial connect webhooks client 1971555464: New connection webhooks client 1971555464: Client info {'program': 'Moonraker', 'version': 'v0.1.0-45-gab35346'} Loaded MCU 'mcu' 85 commands (v0.8.0-835-gcf6d302a-20201019_192218-mainsailos / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125) MCU 'mcu' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000 Starting serial connect Loaded MCU 'z' 85 commands (v0.8.0-835-gcf6d302a-20201019_192218-mainsailos / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125) MCU 'z' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000 Sending MCU 'mcu' printer configuration... Configured MCU 'mcu' (643 moves) Sending MCU 'z' printer configuration... Configured MCU 'z' (641 moves) Starting heater checks for heater_bed Starting heater checks for extruder Stats 21.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1346 bytes_read=3504 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=110 retransmit_seq=0 srtt=0.012 rttvar=0.003 rto=0.025 ready_bytes=2075 stalled_bytes=50 freq=15891205 z: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=858 bytes_read=3448 bytes_retransmit=0 bytes_invalid=3 send_seq=101 receive_seq=101 retransmit_seq=0 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15897435 adj=16007066 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000 sysload=1.03 cputime=2.939 memavail=778808 Stats 22.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3692 bytes_read=3749 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.012 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891308 z: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=864 bytes_read=3463 bytes_retransmit=0 bytes_invalid=3 send_seq=102 receive_seq=102 retransmit_seq=0 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15898544 adj=16006169 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000 sysload=1.03 cputime=2.968 memavail=775868 Stats 23.9: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3793 bytes_read=3820 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.012 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891326 z: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=870 bytes_read=3504 bytes_retransmit=0 bytes_invalid=3 send_seq=103 receive_seq=103 retransmit_seq=0 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15898692 adj=15997334 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=1.03 cputime=2.989 memavail=775936 MCU 'z' shutdown: ADC out of range clocksync state: mcu_freq=16000000 last_clock=45667823 clock_est=(21.587 10367101 15898692.265) min_half_rtt=0.001280 min_rtt_time=21.777 time_avg=21.586(0.246) clock_avg=10367101.058(3914606.873) pred_variance=178408681.571 clock_adj=(1.652 16000012.500) Dumping serial stats: bytes_write=870 bytes_read=3528 bytes_retransmit=0 bytes_invalid=3 send_seq=103 receive_seq=103 retransmit_seq=0 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 Dumping send queue 88 messages Sent 0 20.937560 20.937560 8: seq: 11, identify offset=0 count=40 Sent 1 20.951998 20.951998 8: seq: 10, identify offset=0 count=40 Sent 2 20.958570 20.958570 8: seq: 11, identify offset=40 count=40 Sent 3 20.964987 20.964987 8: seq: 12, identify offset=80 count=40 Sent 4 20.975467 20.975467 9: seq: 13, identify offset=120 count=40 Sent 5 20.984347 20.984347 9: seq: 14, identify offset=160 count=40 Sent 6 20.991294 20.991294 9: seq: 15, identify offset=200 count=40 Sent 7 20.997291 20.997291 9: seq: 16, identify offset=240 count=40 Sent 8 21.003819 21.003819 9: seq: 17, identify offset=280 count=40 Sent 9 21.010333 21.010333 9: seq: 18, identify offset=320 count=40 Sent 10 21.016837 21.016837 9: seq: 19, identify offset=360 count=40 Sent 11 21.023338 21.023338 9: seq: 1a, identify offset=400 count=40 Sent 12 21.029790 21.029790 9: seq: 1b, identify offset=440 count=40 Sent 13 21.036390 21.036390 9: seq: 1c, identify offset=480 count=40 Sent 14 21.042830 21.042830 9: seq: 1d, identify offset=520 count=40 Sent 15 21.050079 21.050079 9: seq: 1e, identify offset=560 count=40 Sent 16 21.057748 21.057748 9: seq: 1f, identify offset=600 count=40 Sent 17 21.064131 21.064131 9: seq: 10, identify offset=640 count=40 Sent 18 21.071031 21.071031 9: seq: 11, identify offset=680 count=40 Sent 19 21.078232 21.078232 9: seq: 12, identify offset=720 count=40 Sent 20 21.084381 21.084381 9: seq: 13, identify offset=760 count=40 Sent 21 21.091134 21.091134 9: seq: 14, identify offset=800 count=40 Sent 22 21.097678 21.097678 9: seq: 15, identify offset=840 count=40 Sent 23 21.104289 21.104289 9: seq: 16, identify offset=880 count=40 Sent 24 21.110802 21.110802 9: seq: 17, identify offset=920 count=40 Sent 25 21.117092 21.117092 9: seq: 18, identify offset=960 count=40 Sent 26 21.123656 21.123656 9: seq: 19, identify offset=1000 count=40 Sent 27 21.130345 21.130345 9: seq: 1a, identify offset=1040 count=40 Sent 28 21.136656 21.136656 9: seq: 1b, identify offset=1080 count=40 Sent 29 21.143235 21.143235 9: seq: 1c, identify offset=1120 count=40 Sent 30 21.149481 21.149481 9: seq: 1d, identify offset=1160 count=40 Sent 31 21.156186 21.156186 9: seq: 1e, identify offset=1200 count=40 Sent 32 21.162723 21.162723 9: seq: 1f, identify offset=1240 count=40 Sent 33 21.169604 21.169604 9: seq: 10, identify offset=1280 count=40 Sent 34 21.175744 21.175744 9: seq: 11, identify offset=1320 count=40 Sent 35 21.182143 21.182143 9: seq: 12, identify offset=1360 count=40 Sent 36 21.188213 21.188213 9: seq: 13, identify offset=1400 count=40 Sent 37 21.195078 21.195078 9: seq: 14, identify offset=1440 count=40 Sent 38 21.201723 21.201723 9: seq: 15, identify offset=1480 count=40 Sent 39 21.208544 21.208544 9: seq: 16, identify offset=1520 count=40 Sent 40 21.214840 21.214840 9: seq: 17, identify offset=1560 count=40 Sent 41 21.221547 21.221547 9: seq: 18, identify offset=1600 count=40 Sent 42 21.227680 21.227680 9: seq: 19, identify offset=1640 count=40 Sent 43 21.234293 21.234293 9: seq: 1a, identify offset=1680 count=40 Sent 44 21.244921 21.244921 9: seq: 1b, identify offset=1720 count=40 Sent 45 21.252325 21.252325 9: seq: 1c, identify offset=1760 count=40 Sent 46 21.258968 21.258968 9: seq: 1d, identify offset=1800 count=40 Sent 47 21.265265 21.265265 9: seq: 1e, identify offset=1840 count=40 Sent 48 21.271765 21.271765 9: seq: 1f, identify offset=1880 count=40 Sent 49 21.278496 21.278496 9: seq: 10, identify offset=1920 count=40 Sent 50 21.284603 21.284603 9: seq: 11, identify offset=1960 count=40 Sent 51 21.290914 21.290914 9: seq: 12, identify offset=2000 count=40 Sent 52 21.297329 21.297329 9: seq: 13, identify offset=2040 count=40 Sent 53 21.303868 21.303868 9: seq: 14, identify offset=2080 count=40 Sent 54 21.310459 21.310459 9: seq: 15, identify offset=2120 count=40 Sent 55 21.317262 21.317262 9: seq: 16, identify offset=2160 count=40 Sent 56 21.323943 21.323943 9: seq: 17, identify offset=2200 count=40 Sent 57 21.332116 21.332116 9: seq: 18, identify offset=2240 count=40 Sent 58 21.339834 21.339834 9: seq: 19, identify offset=2280 count=40 Sent 59 21.348839 21.348839 9: seq: 1a, identify offset=2320 count=40 Sent 60 21.364122 21.364122 9: seq: 1b, identify offset=2355 count=40 Sent 61 21.390226 21.389986 6: seq: 1c, get_uptime Sent 62 21.445535 21.445295 6: seq: 1d, get_clock Sent 63 21.500139 21.499899 6: seq: 1e, get_clock Sent 64 21.555506 21.555266 6: seq: 1f, get_clock Sent 65 21.610558 21.610318 6: seq: 10, get_clock Sent 66 21.665796 21.665556 6: seq: 11, get_clock Sent 67 21.721000 21.720760 6: seq: 12, get_clock Sent 68 21.776825 21.776585 6: seq: 13, get_clock Sent 69 21.831180 21.830940 6: seq: 14, get_clock Sent 70 21.837421 21.837181 6: seq: 15, get_clock Sent 71 21.893947 21.893707 6: seq: 16, get_config Sent 72 21.906663 21.906383 7: seq: 17, allocate_oids count=14 Sent 73 21.907063 21.906469 10: seq: 18, config_endstop oid=4 pin=PD2 pull_up=1 stepper_count=4 Sent 74 21.907503 21.906604 11: seq: 19, config_soft_pwm_out oid=5 pin=PH6 value=0 default_value=1 max_duration=0 Sent 75 21.907943 21.906715 11: seq: 1a, config_soft_pwm_out oid=6 pin=PB4 value=0 default_value=0 max_duration=0 Sent 76 21.908263 21.906796 8: seq: 1b, config_analog_in oid=7 pin=PK7 Sent 77 21.908823 21.906913 14: seq: 1c, config_soft_pwm_out oid=8 pin=PB5 value=0 default_value=0 max_duration=80000000 Sent 78 21.909303 21.907033 12: seq: 1d, config_stepper oid=0 step_pin=PF0 dir_pin=PF1 min_stop_interval=3936 invert_step=0 Sent 79 21.909743 21.907160 11: seq: 1e, config_digital_out oid=9 pin=PD7 value=1 default_value=1 max_duration=0 Sent 80 21.910143 21.907249 10: seq: 1f, config_endstop oid=10 pin=PD3 pull_up=1 stepper_count=4 Sent 81 21.910623 21.907365 12: seq: 10, config_stepper oid=1 step_pin=PF6 dir_pin=PF7 min_stop_interval=3936 invert_step=0 Sent 82 21.911063 21.907487 11: seq: 11, config_digital_out oid=11 pin=PF2 value=1 default_value=1 max_duration=0 Sent 83 21.911543 21.907602 12: seq: 12, config_stepper oid=2 step_pin=PL3 dir_pin=PL1 min_stop_interval=3936 invert_step=0 Sent 84 21.913783 21.911466 56: seq: 13, config_digital_out oid=12 pin=PK0 value=1 default_value=1 max_duration=0, config_stepper oid=3 step_pin=PA4 dir_pin=PA6 min_stop_interval=3936 invert_step=0, config_digital_out oid=13 pin=PA2 value=1 default_value=1 max_duration=0, finalize_config crc=1406212237, endstop_set_stepper oid=4 pos=0 stepper_oid=0, endstop_set_stepper oid=4 pos=1 stepper_oid=1, endstop_set_stepper oid=4 pos=2 stepper_oid=2, endstop_set_stepper oid=4 pos=3 stepper_oid=3, schedule_soft_pwm_out oid=5 clock=18526591 on_ticks=0 off_ticks=160000 Sent 85 21.916263 21.911466 62: seq: 14, schedule_soft_pwm_out oid=6 clock=18529007 on_ticks=0 off_ticks=160000, query_analog_in oid=7 clock=38695451 sample_ticks=16000 sample_count=8 rest_ticks=4800000 min_value=4106 max_value=8077 range_check_count=4, schedule_soft_pwm_out oid=8 clock=18533121 on_ticks=0 off_ticks=1600000, endstop_set_stepper oid=10 pos=0 stepper_oid=0, endstop_set_stepper oid=10 pos=1 stepper_oid=1, endstop_set_stepper oid=10 pos=2 stepper_oid=2, endstop_set_stepper oid=10 pos=3 stepper_oid=3, get_config Sent 86 22.822341 22.822101 6: seq: 15, get_clock Sent 87 23.806528 23.806288 6: seq: 16, get_clock Dumping receive queue 78 messages Receive: 0 20.957636 20.951998 48: seq: 11, identify_response offset=0 data='x\xda\x9dXmo\xe3\xb8\x11\xfe+<\x03\x8b\xf6\x8a$\xb0d\xcbv\\xec\x87\xc4\xf1^\xd3\xdbds\xebM\xb7EQ\x08\x8cD\xdb' Receive: 1 20.964136 20.958570 48: seq: 12, identify_response offset=40 data='D\xf4v\x12\x95\xc4w\xc8\x7f\xef3|\x93\xecx\xf7\xd0\x06\x08,\x92\xc3\xe1p^\x9f\xe1\xef\x83\x87Vfi\xfc$\xeaF\x96E3' Receive: 2 20.970704 20.964987 48: seq: 13, identify_response offset=80 data='\x98\x0f6I2g\x7f\xfei\xb1\xf8\x91Eg\xe3\xb3!{\x90E\xabd\xd6\xd0\xec\xed=\xbb\xb4\xc3\x1fYx\x16N\xce\xc2a0\x19' Receive: 3 20.980961 20.975467 49: seq: 14, identify_response offset=120 data='\x06a48\x19$e\x9e\xf3"\x05\x93\xdf\x07<\xcb\xca\x84+\x11\x972mXR\xb6\x85z\xff.\x19\xcc\x83\xe9\t\x8eT\ng\xc5' Receive: 4 20.989900 20.984347 49: seq: 15, identify_response offset=160 data='<ydX\xc6|\x8f\xa0\xbf\x9e\xa6n\xbd\x1b\xfd#\x8b\xf7\xefZV\xb5Y\x16\xb7\x95\xa6\x1f\r\xbb\r\xbf\xb6\xa2\xdey\x96\x10\xe0' Receive: 5 20.996388 20.991294 49: seq: 16, identify_response offset=200 data='\x91\xa8k\xd1\xa8X\xc9\xe4\xb11#U\xf3\xa2\xc9\xa5\x8a\xdd\xa1L\x16\xb8\xbf\x95o\x86{d\x82\xd7q\xb3mUZ>\x17\x83\xf9\x98' Receive: 6 21.002883 20.997291 49: seq: 17, identify_response offset=240 data='\xaeV\xac\xe5\x06\x12\xbdd\xa3q\xe4\x8eh\x19\x9b\xcf\xc1|\xd2\x11\x15<+7\xb1,\xbc\xf0Z\xea\xc1<\n=\x8d\x95\xd8Q\x98' Receive: 7 21.009388 21.003819 49: seq: 18, identify_response offset=280 data="a\xdcia\xe4)S\xb9\x91\x8agq\xd9\xaa}~\xec\x89g\xad\xa0q\xd6\xbc\xcdT\xec'r\xfe\x12\xa7m\xcd\x15L\xaaO\x0e" Receive: 8 21.015882 21.010333 49: seq: 19, identify_response offset=320 data='\xbb\x93\x05\x0c\xa4\xcaj\x8fW\xd2\xd3(k\x94\xa8Q\xf7\x84\t\xce\xfd\xeem:\x1eOgC\xb7\xbbnb+\x8cp\x1f\xe9\xd8\x7f' Receive: 9 21.022388 21.016837 49: seq: 1a, identify_response offset=360 data='E\xfek\xe2\xbf\xa6\xfeKd|\xe7\xcd\x02\x11g\xfe\x10\x19&\xee\x00|BW\xc6p\xf0&\xfa\x85W\xc0\xa2f\xd3\xa4\xd3S!\xca' Receive: 10 21.028878 21.023338 49: seq: 1b, identify_response offset=400 data='J\xbe\x88\xec@I\x0f\xb03\xa9\xa3g\xffFJ\x16\xbd\xb3\xa3\xc8\xb3\xa9\x9e\xf3#\xaaNv\xf0\x89\x8e\x87U\xf4\xb6=T=f' Receive: 11 21.035391 21.029790 49: seq: 1c, identify_response offset=440 data='\xde\xe8>\xe8dl\xca\xb5\xfa\xc6\t\xff\x8b1\x87\x1d\xc3J\x1e:Y\xb0\xb7\xea\xbd\xf8\xad\xcb2\xb7\x14\xe7\xcd\xe6\xfd\xbb\xbf l\xc3' Receive: 12 21.041885 21.036390 49: seq: 1d, identify_response offset=480 data='o\xef\xb3T[H\x1a\'\xceO\xa1\xa9.\x16\x1a5=\x0f\xbd\'$\xde\x13\x9a${\xf4\xdf2\xf5\x9f\xbb"\x89\xf7\x8d\xce\x92<' Receive: 13 21.048393 21.042830 49: seq: 1e, identify_response offset=520 data='\x8d\x0f\xfd\x14\xf5N\xd0\x9e\xe8E\xc70\xb6\xfe\x9a\xca\xda}\x92)\xc9\xa3\x11pJ\xd4P\x1bq6\x11\xad9h\xb9\xc7\xdd\xcd\xd4' Receive: 14 21.056305 21.050079 49: seq: 1f, identify_response offset=560 data='V\xd4y\t\xef\xae2qD+\xfd\xe5X\xed*a\xee\xdd\x19Q\xe5I\xcbko\xbf\xfa%~\x93\x95\x98\xf2\x93\xe4\x7fJ\xe6\xc2\xb8' Receive: 15 21.062641 21.057748 49: seq: 10, identify_response offset=600 data='+\xa4H\xc5C\x0boE\x04\xa6\\q\xa3\xf7\xc9\xd8\xcdc\xd7\xa6\xb7\x10\xf8\x85Zp$\xc3:\x155\xf1\xa7\x18\xd0\x1c\xc7\xe7\x8e\xe0' Receive: 16 21.069186 21.064131 49: seq: 11, identify_response offset=640 data='\xb9\x96J\xbc\xa1F\x1f \x84ZE.\xea\x8d(\x92\x9d\xd6\x17T\x8d\x9c\x85t\x10oj\xdc\x16$#=\xd4\xba\xdc\x96\xb9x\x93' Receive: 17 21.076957 21.071031 49: seq: 12, identify_response offset=680 data='H\x1b\x9eW\xfd0\xb0c\x9fF\xf7\x13-\xae\xe2\x9d\x187\t;\xe6:MC\x06\xae\x84w\xacY\xb7L\xf1yz\x9b\xfe]j' Receive: 18 21.083376 21.078232 49: seq: 13, identify_response offset=720 data='r\x9bF\xd0\xe7Z"\xdd\xca\xdfH\x0c2\x0fK\xea\xc4D\xc9\xc9\x03FZxP\x9e\xdb\xa1&\xc2]\xc7f\xdcVd\x1c\x88\x07' Receive: 19 21.089908 21.084381 49: seq: 14, identify_response offset=760 data="N6\xb7\xe1|\xe8\x04\xae\xe9\xb33}\x1b{\x8c'\x07ddG\xd6\x99-\xc4i\x94\xb9\xf22\x95\xeb]\x0c\x1f\xf0\xbcj\xa1c" Receive: 20 21.096418 21.091134 49: seq: 15, identify_response offset=800 data='\x8d\xd9\x1a\x03\x11h\xd5l\x8b\xec6c\xeb}z\x9a\x8b3ac<2\x84\xd6\xe6\x87\xc7\x8f`H\x99\x8aB\xe1pV\xae\xd78E' Receive: 21 21.102939 21.097678 49: seq: 16, identify_response offset=840 data='G[\x97\xd0O\x06.]\xeak\x1ca\x812l\xcctP\xf2\x8eW\xd5\xc1\xfc\xdc\xd3\x1fV\xbf\xff\xd3}\xf2\xce}lV\xedF(' Receive: 22 21.109452 21.104289 49: seq: 17, identify_response offset=880 data='\xe0\x1bl\xdc\x8a\xe4\xb1W\xa6\xc2\xc8\xc9p,\xc4\xbf\x01\x07z\xc7\xec\x9dBU!\xd0\xfcZ\xa1\xbd\xd1W\xa4^\x96\xb1gouQ' Receive: 23 21.115921 21.110802 49: seq: 18, identify_response offset=920 data='\xc2\xaf\x84\x10\xd0\xbd.1\xd0\xe1\xd8~\xea\xfd\xc6\x13\x0f\xa5\xc1\x06\xb8T\x83\xab\xa4-tq\xa4\xd8{\xb9\xbbX\n\xa7\xbd-\x07\xe5' Receive: 24 21.122489 21.117092 49: seq: 19, identifyresponse offset=960 data='\xe4\x90|K\xb1\x1f\xf6\xe8\x8f\xd5 \xbf\xa9\xec\xaa"9N\xbfD\xd2\x99\xb8J\xc2\x83\xd2\x05"CS\x88\x17{g\xa4i\xef[' Receive: 25 21.128927 21.123656 49: seq: 1a, identify_response offset=1000 data='\xb268ih\x88\x9c\x08\x7fPa\xc1\x946P%;\xea\xa8\xd1\xc4\xad\x02\n\xfd\x84nq\x03\x82P\xf4\xf0\x03\xec2\xeb\xb6\x90' Receive: 26 21.135416 21.130345 49: seq: 1b, identify_response offset=1040 data='6\x9ey-\xfa{s\xd9\x94.}\xe7e#\x8f\x15\xb67L\xc7S\xc3T\x83\xcbu\x97\xb9z!EV\xd05\xf3{\x19&\x9a\xed' Receive: 27 21.141944 21.136656 49: seq: 1c, identify_response offset=1080 data='S}#\xc1\x8c\x89\nU\xc8\xe4\xee\x9e;\x8d\xf5~\x93&)\xc1!sJB\x0e>\xd1\x06P\x98-a{\xd5\xb9\xc4\xa7\x1aS' Receive: 28 21.148407 21.143235 49: seq: 1d, identify_response offset=1120 data='4\xa1\xf9\xb6J\t\xc5\x1fq\xcc\xce\xec\x93\xf0\xd5UG\x82\xfe\x17W\x8b\xf8\xe6\xe2\x9f\x04E(\x1a.\xefW\xf1\xdd\xf5\xed\x8a \x05' Receive: 29 21.155072 21.149481 49: seq: 1e, identify_response offset=1160 data='\xda\x8b\xbb\xcb\xd1\xc9\xdde\x88\xff\xd0[T\xcfz\xf1jxrwE\x0b\x8b\x8f\x9f\x16?\xc7\x1f>/\x7f!\x91\x87\xfa\xefdp' Receive: 30 21.161528 21.156186 49: seq: 1f, identify_response offset=1200 data='\xb3\xb8\x07\x15W\xb9\xd8\xf00\x9a\x0cAx\xf7\xf5\xc6\x9c\x16\x12\x8a\xfb\xbc\\,\xaf\xff\xb1\x8c\xbf^\xdf^}\xfaJ\xd05\xa4\xc9\xd5' Receive: 31 21.168053 21.162723 49: seq: 10, identify_response offset=1240 data='\xf23&\x8d\x14\xa2\x96<\xa3\xb3\x968kIga\xf5\xfa\xe2c|yq\x7fEl\xccQ\xab/\x17_V\xf1\xea\xfef\xf5\x0bV' Receive: 32 21.174609 21.169604 49: seq: 11, identify_response offset=1280 data='VKZ\x99\xd0\xf4\xf2.\xbeZ~\xbc\xf8\xd7~\x1a\xbcR\xd5jQV5:\xd3\x8d\x8fE\xac\xf4\xa9\xef4\x04\r\x9c\x86\xc6w' Receive: 33 21.181008 21.175744 49: seq: 12, identify_response offset=1320 data='\x17\xc3\xc1\xfc\xdf\xc3\x93\xd9\x7f \xf6%}\xcf\xcc\xf7\x82\xbea\x18=\xb8\xa2\x01\x0c\xac\x07K\x1a\xc0s\xf4\xe0\x03\r\xc6v\xffOz' Receive: 34 21.187477 21.182143 49: seq: 13, identify_response offset=1360 data='\x19\xfc\x8d\x06\x91e\xf0w\x1aL\xed\x9e\x9f\xf51v\xcfG=\xa0=\xaf\xc6[\xad\xa0\xda2$(\xd5d\x99 vk\xe0\x90X' Receive: 35 21.194040 21.188213 49: seq: 14, identify_response offset=1400 data='\xa6\xd6\x9cL\x9b}m\xf2\xae\xc9?\x17\x19\xb9\xc9\x8e\xb9\xf2\x9b\x1a\xa0\xbb\xe0\x05+J\xc5\xdaF0\xaa\xacu\xc0\xd6e\xcd\xa4\xbf' Receive: 36 21.200625 21.195078 49: seq: 15, identify_response offset=1440 data='\xba\xb1lh5\xd5\xf3z\xaa1\xd1\x83\xad\x7fR\x8c7\x8d\xdcho5E\xd9\xcc\xea4\xaa\xa9\xd9\xf3V\x14\x0e\x080\x9e(\xf9$' Receive: 37 21.207250 21.201723 49: seq: 16, identify_response offset=1480 data="L\x7f\xb30\xdd'\xabx\r\x1b3Q\xd7e\xad\xdbI\xb7P\x0bd\xf3Fi\xac\xf1\x81\xcb\x0c2\xa8\x92\xe9\x18\xa0\x8eC\xc7\x93A" Receive: 38 21.213677 21.208544 49: seq: 17, identify_response offset=1520 data='A\xd7\x05\x9c[\xa6\xccui]\xcfhR\xbe\xc9\xed\x8e\xca\xb6\xbd:\xfdus #Qx.P/L]p\x8by\xf9$\x9c4' Receive: 39 21.220264 21.214840 49: seq: 18, identify_response offset=1560 data='\x80\xc8\xbf\t\x03\xf4\xdc2\xee\xce\x08x\x1a\xd0\xe4f\t\xea\xbb\x18\xa3^\xa97O\x99\x0cI\xc0\x9f\xd6\x98\x94\xef(\xf6\xaaa\xb2\x95' Receive: 40 21.226626 21.221547 49: seq: 19, identify_response offset=1600 data='\x95\xe5N\xe8\xe9\x86\xbf\x90ag\xee\xaa\x06\x14\xde\xa0\xbf\xe2\x1b\xc1\x80\x15\x91\xe7\x9ciA6d:[L\x08\xabb3\xa5{&' Receive: 41 21.233177 21.227680 49: seq: 1a, identify_response offset=1640 data='\x9e\x04\xe9\x85\xda\xe7o\x13my\r\xfb<\xe7\x8e\x9a\x80\xca\xb7\xa9\x115\x8e\x90\x1a\x93\xef\x10v\x1c\xa97\xba!\xf5\xea\xc2\xcdD^' Receive: 42 21.243130 21.234293 49: seq: 1b, identifyresponse offset=1680 data='\xa9\x9d\xc1K\xb7\xa5!&\xd71X\xe1\x16~\xca\x99\xd1\x119\xb9\x8eRj\x14\xfa\x0b\xf0\\xbb0\xdb\x90Ee\xaa\x97\x01\x97z' Receive: 43 21.251177 21.244921 49: seq: 1c, identify_response offset=1720 data='\xa9\xa0@\xf1\xd3\x94>i;\xb7\xa1R\xd5\xe5\x06\x16\xcaq\t\xaeP\x0f\xd7(\x13\x10\x1a\x16\x14\x14>\x84-?\x0bW\xa7S\x13\x1b' Receive: 44 21.257715 21.252325 49: seq: 1d, identify_response offset=1760 data='8\x86\xec\x07\xdb\x92\xe3R\xe5Z!\x10\x8c\xb1\xf4$a\x16\x99\xb7\xb9\x9bs\xfe\x19\x19J\x17({\xa4n\xd2\xd2\x12\x02Y\xb96Q' Receive: 45 21.264173 21.258968 49: seq: 1e, identifyresponse offset=1800 data='\xe3R\x9c\xae\xc3\x8c"\xb9{\x06\x81K\xad\xecNU\x96l\xcd\xb5tF2*H\xfa~\xf66k\xd0C\xcd\x1e\ti\x05\xbct' Receive: 46 21.270666 21.265265 49: seq: 1f, identify_response offset=1840 data='\xbbk0\xf3\x17}eb\x8e\x82\xd6\x08\xfd\x0cr_4mU\x95\xb5\x12&Lu\xca\xa2n\xe6+W\xc96-7FQ?\x98^' Receive: 47 21.277221 21.271765 49: seq: 10, identify_response offset=1880 data="H?;\x01\x19\xb6\xc5#\x18S\x8c\x9b'\xa7\xde|\xd3-to6&\xc1\x94E\xb6c\xfc\t\xcb\xfc!s\xa9\xc6\xdf\xdf\xa0s}" Receive: 48 21.283612 21.278496 49: seq: 11, identify_response offset=1920 data='\x1cnfz\x88\x03\x94?g\x9f\xd2\x94\xa1"<\x10\x02XS\xf7\xd7\xfcJ\xbfq>\xc0\r\xe3\xae/\x8a\xda\x1d\xfc\xcaF\x91/' Receive: 49 21.290131 21.284603 49: seq: 12, identify_response offset=1960 data='c\xd2<\xb4\xe8\xf72\xe72\xee\x15-5}}C\x98\xbe\x10\x99\xf5\x8d\x04\xcb\xdas|E\xd7\x10A+0\xe3\xb5V\xfa\x14Y\xfd' Receive: 50 21.296607 21.290914 49: seq: 13, identify_response offset=2000 data="MKKi\x1d5s\x14\xcc\xa2\x08\x89\xff\xc4\r&\xba50\x83I\xa4-\x8e\xc1d2\xc5\xf7\xe8\xf5U\xc3\xd9\nYB\x98'>" Receive: 51 21.303104 21.297329 49: seq: 14, identify_response offset=2040 data='\xd3\x19\xecA\x94\x86\xb2Z\x91\xd8\xc7\x11\x8fWf\x10\xd1\x91\xf70\x07>\x03\xd7\x1d\xd3 \xf4\x83L\xf6\x1e\xe8\xc0\xaa\xcf\x17\xec\xc2\x8e' Receive: 52 21.309604 21.303868 49: seq: 15, identify_response offset=2080 data="\x9dN\xdb\xdd\x13\x01\x06\x1dK=\x0c\xbb\xfe{\x06\x7f\xf2\xfd\xc9^\x03\xaasC|\x0c<O'\xdd\xfb\xe2\xde\x0e\xdek>\x98^\xb1" Receive: 53 21.316188 21.310459 49: seq: 16, identify_response offset=2120 data='w\xa5\x07\x18\x8d\xf5;T6\xf5\x8f2(\x7f\xb6\t\xd5\xb8O7\xab\xba \xf4.\x0b\x12\xe7u\xe6I4\xe8^\x01\x1a\x04\x8bo\xea' Receive: 54 21.322700 21.317262 49: seq: 17, identify_response offset=2160 data='\xa7\xbd\x8e}O6\xb4\xefp*\xfb,\xd4\xeb\xc2\xa7Q\xd7a\xc6\xce\x98]\xabi\xc6\xe6\x1a\xd3\xf3\xae\x89\xec\x91\xfan\xd2\x18\xf7\x8c' Receive: 55 21.330494 21.323943 49: seq: 18, identify_response offset=2200 data='Hq\xb9\x9e\xc8\xec\x10D\x18=N\xa0G\xf0\xe8\xbfnL\t\x11w\x89\xc7\xb5\x89\xc7\xb7\x1f\xe0\xeb?\x92~j\x012xsd' Receive: 56 21.338185 21.332116 49: seq: 19, identifyresponse offset=2240 data='\xa0\x8d\x7f\x88\xc6)mn\x7f\x9a\xcd\xdbL\x0f8\x1f\x80f\xf3\xfc\x00\x884\x1d\x1f\x04\x93\xb5\xc7\xf7|\xa85\t\xce\xa8\x7f\xd6a' Receive: 57 21.345991 21.339834 49: seq: 1a, identify_response offset=2280 data='\xef\xb7\xf2\x13\xea\xd6\x0e\x14\x10\xec\xd6g+7[\xdd\x1dyO\x9a\x9c#\x0c\xedk=@\xec\xd3\xf0lv6<\x9d\x8d\xa2\xd3M' Receive: 58 21.362497 21.348839 44: seq: 1b, identify_response offset=2320 data='\xb2\x9e\xa4\xa3a\xc8O\xc3a8\x0c\x86\xc1y\x0c\xf4\x1b\x06\xb3\xd3\x9c\xcb\xa2AR+\x9b\xc1\xeb\x7f\x01\xbah\xf6\x1e' Receive: 59 21.368582 21.364122 9: seq: 1c, identify_response offset=2355 data='' Receive: 60 21.393444 21.390226 11: seq: 1d, uptime high=0 clock=7251823 Receive: 61 21.448570 21.445535 10: seq: 1e, clock clock=8129505 Receive: 62 21.503791 21.500139 10: seq: 1f, clock clock=8997980 Receive: 63 21.558820 21.555506 10: seq: 10, clock clock=9879313 Receive: 64 21.614016 21.610558 10: seq: 11, clock clock=10753385 Receive: 65 21.669099 21.665796 10: seq: 12, clock clock=11632234 Receive: 66 21.724199 21.721000 10: seq: 13, clock clock=12509553 Receive: 67 21.779385 21.776825 10: seq: 14, clock clock=13397039 Receive: 68 21.834493 21.831180 10: seq: 15, clock clock=14264694 Receive: 69 21.840821 21.837421 10: seq: 16, clock clock=14360035 Receive: 70 21.897294 21.893947 10: seq: 17, config is_config=0 crc=0 move_count=0 is_shutdown=0 Receive: 71 21.923622 21.916263 15: seq: 15, config is_config=1 crc=1406212237 move_count=641 is_shutdown=0 Receive: 72 22.825294 22.822341 10: seq: 16, clock clock=30020666 Receive: 73 23.378950 22.822341 13: seq: 16, analog_in_state oid=7 next_clock=43495451 value=8184 Receive: 74 23.680417 22.822341 13: seq: 16, analog_in_state oid=7 next_clock=48295451 value=8184 Receive: 75 23.809393 23.806528 10: seq: 17, clock clock=45667823 Receive: 76 23.983192 23.806528 13: seq: 17, analog_in_state oid=7 next_clock=53095451 value=8184 Receive: 77 24.285876 23.806528 11: seq: 17, shutdown clock=53223634 static_string_id=ADC out of range Transition to shutdown state: MCU 'z' shutdown: ADC out of range This generally occurs when a heater temperature exceeds its configured min_temp or max_temp. Dumping gcode input 0 blocks gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.0166666666667 extrude_factor=1.0 speed=25.0 Reactor garbage collection: (21.390216762, 0.0, 0.0) MCU 'mcu' shutdown: ADC out of range clocksync state: mcu_freq=16000000 last_clock=70992959 clock_est=(20.568 20651765 15891326.666) min_half_rtt=0.000320 min_rtt_time=22.752 time_avg=20.568(0.609) clock_avg=20651765.283(9671229.945) pred_variance=171771958.922 Dumping serial stats: bytes_write=3793 bytes_read=3859 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.012 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 Dumping send queue 100 messages Sent 0 20.005267 20.005267 9: seq: 1e, identify offset=1840 count=40 Sent 1 20.021640 20.021640 9: seq: 1f, identify offset=1880 count=40 Sent 2 20.038021 20.038021 9: seq: 10, identify offset=1920 count=40 Sent 3 20.053134 20.053134 9: seq: 11, identify offset=1960 count=40 Sent 4 20.069479 20.069479 9: seq: 12, identify offset=2000 count=40 Sent 5 20.085868 20.085868 9: seq: 13, identify offset=2040 count=40 Sent 6 20.102230 20.102230 9: seq: 14, identify offset=2080 count=40 Sent 7 20.117349 20.117349 9: seq: 15, identify offset=2120 count=40 Sent 8 20.133743 20.133743 9: seq: 16, identify offset=2160 count=40 Sent 9 20.150171 20.150171 9: seq: 17, identify offset=2200 count=40 Sent 10 20.165223 20.165223 9: seq: 18, identify offset=2240 count=40 Sent 11 20.181616 20.181616 9: seq: 19, identify offset=2280 count=40 Sent 12 20.199014 20.199014 9: seq: 1a, identify offset=2320 count=40 Sent 13 20.213423 20.213423 9: seq: 1b, identify offset=2355 count=40 Sent 14 20.244459 20.244219 6: seq: 1c, get_uptime Sent 15 20.311447 20.311207 6: seq: 1d, get_clock Sent 16 20.376130 20.375890 6: seq: 1e, get_clock Sent 17 20.440076 20.439836 6: seq: 1f, get_clock Sent 18 20.506910 20.506670 6: seq: 10, get_clock Sent 19 20.567212 20.566972 6: seq: 11, get_clock Sent 20 20.631321 20.631081 6: seq: 12, get_clock Sent 21 20.696041 20.695801 6: seq: 13, get_clock Sent 22 20.762165 20.761925 6: seq: 14, get_clock Sent 23 20.782224 20.781984 6: seq: 15, get_clock Sent 24 21.766822 21.766582 6: seq: 16, get_clock Sent 25 21.837187 21.836947 6: seq: 17, get_config Sent 26 21.851608 21.851328 7: seq: 18, allocate_oids count=14 Sent 27 21.852048 21.851579 11: seq: 19, config_soft_pwm_out oid=4 pin=PH6 value=0 default_value=0 max_duration=0 Sent 28 21.852608 21.851827 14: seq: 1a, config_st7920 oid=0 cs_pin=PH1 sclk_pin=PA1 sid_pin=PH0 sync_delay_ticks=720 cmd_delay_ticks=320 Sent 29 21.852928 21.851973 8: seq: 1b, config_buttons oid=5 button_count=3 Sent 30 21.853368 21.852167 11: seq: 1c, config_digital_out oid=6 pin=PC0 value=0 default_value=0 max_duration=0 Sent 31 21.853848 21.852372 12: seq: 1d, config_stepper oid=1 step_pin=PF0 dir_pin=PF1 min_stop_interval=11212 invert_step=0 Sent 32 21.854288 21.852561 11: seq: 1e, config_digital_out oid=7 pin=PD7 value=1 default_value=1 max_duration=0 Sent 33 21.854688 21.852733 10: seq: 1f, config_endstop oid=8 pin=PE4 pull_up=1 stepper_count=2 Sent 34 21.855168 21.852917 12: seq: 10, config_stepper oid=2 step_pin=PF6 dir_pin=PF7 min_stop_interval=11212 invert_step=0 Sent 35 21.855608 21.853093 11: seq: 11, config_digital_out oid=9 pin=PF2 value=1 default_value=1 max_duration=0 Sent 36 21.856008 21.853268 10: seq: 12, config_endstop oid=10 pin=PJ0 pull_up=1 stepper_count=2 Sent 37 21.856328 21.853409 8: seq: 13, config_analog_in oid=11 pin=PK5 Sent 38 21.856888 21.853594 14: seq: 14, config_soft_pwm_out oid=12 pin=PB4 value=0 default_value=0 max_duration=80000000 Sent 39 21.875904 21.873384 63: seq: 15, config_stepper oid=3 step_pin=PA4 dir_pin=PA6 min_stop_interval=0 invert_step=0, config_digital_out oid=13 pin=PA2 value=1 default_value=1 max_duration=0, finalize_config crc=3965943724, schedule_soft_pwm_out oid=4 clock=44071013 on_ticks=0 off_ticks=160000, buttons_add oid=5 pos=0 pin=PC6 pull_up=1, buttons_add oid=5 pos=1 pin=PC4 pull_up=1, buttons_add oid=5 pos=2 pin=PC2 pull_up=1, buttons_query oid=5 clock=64800000 rest_ticks=32000 retransmit_count=50 invert=4, endstop_set_stepper oid=8 pos=0 stepper_oid=1 Sent 40 21.877824 21.873384 48: seq: 16, endstop_set_stepper oid=8 pos=1 stepper_oid=2, endstop_set_stepper oid=10 pos=0 stepper_oid=2, endstop_set_stepper oid=10 pos=1 stepper_oid=1, query_analog_in oid=11 clock=65760000 sample_ticks=16000 sample_count=8 rest_ticks=4800000 min_value=277 max_value=8070 range_check_count=4, schedule_soft_pwm_out oid=12 clock=44100583 on_ticks=0 off_ticks=1600000, get_config Sent 41 21.927861 21.927221 16: seq: 17, st7920_send_cmds oid=0 cmds='$@\x02&"\x02\x06\x0c' Sent 42 21.930458 21.928258 55: seq: 18, st7920_send_cmds oid=0 cmds='\x80', st7920_send_data oid=0 data=' ', st7920_send_cmds oid=0 cmds='\x88', st7920_send_data oid=0 data=' ', st7920_send_cmds oid=0 cmds='\x90' Sent 43 21.932498 21.929274 51: seq: 19, st7920_send_data oid=0 data=' ', st7920_send_cmds oid=0 cmds='\x98', st7920_send_data oid=0 data=' ', st7920_send_cmds oid=0 cmds='@' Sent 44 21.934538 21.929663 51: seq: 1a, st7920_send_data oid=0 data='\x00\x00\x00\x00\x0f\xe0\x1f\xf8\x1f\xfc?\xfc<<<<', st7920_send_cmds oid=0 cmds='H', st7920_send_data oid=0 data='<<<<?\xfc?\xf8\x1f\xf8\x07\xf0\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='P' Sent 45 21.939627 21.937587 51: seq: 1b, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00R\x94\x00\x00R\x94\x00\x00R\x94', st7920_send_cmds oid=0 cmds='X', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='' Sent 46 21.941667 21.937587 51: seq: 1c, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='h', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='p' Sent 47 21.943787 21.937587 53: seq: 1d, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='x', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='&\x80\x80' Sent 48 21.955078 21.952958 53: seq: 1e, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x80\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x81\x80' Sent 49 21.957198 21.952958 53: seq: 1f, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x81\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x82\x80' Sent 50 21.959318 21.952958 53: seq: 10, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x82\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x83\x80' Sent 51 21.971223 21.969103 53: seq: 11, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x83\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x84\x80' Sent 52 21.973343 21.969103 53: seq: 12, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x84\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x85\x80' Sent 53 21.975463 21.969103 53: seq: 13, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x85\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x86\x80' Sent 54 21.987664 21.985544 53: seq: 14, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x86\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x87\x80' Sent 55 21.989784 21.985544 53: seq: 15, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x87\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x88\x80' Sent 56 21.991904 21.985544 53: seq: 16, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x88\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x89\x80' Sent 57 22.003977 22.001857 53: seq: 17, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x89\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8a\x80' Sent 58 22.006097 22.001857 53: seq: 18, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8a\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8b\x80' Sent 59 22.008217 22.001857 53: seq: 19, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8b\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8c\x80' Sent 60 22.019120 22.017000 53: seq: 1a, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8c\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8d\x80' Sent 61 22.021240 22.017000 53: seq: 1b, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8d\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8e\x80' Sent 62 22.023360 22.017000 53: seq: 1c, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8e\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8f\x80' Sent 63 22.035508 22.033388 53: seq: 1d, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x8f\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x90\x80' Sent 64 22.037628 22.033388 53: seq: 1e, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x90\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x91\x80' Sent 65 22.039748 22.033388 53: seq: 1f, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x91\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x92\x80' Sent 66 22.051864 22.049744 53: seq: 10, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x92\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x93\x80' Sent 67 22.053984 22.049744 53: seq: 11, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x93\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x94\x80' Sent 68 22.056104 22.049744 53: seq: 12, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x94\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x95\x80' Sent 69 22.066949 22.064829 53: seq: 13, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x95\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x96\x80' Sent 70 22.069069 22.064829 53: seq: 14, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x96\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x97\x80' Sent 71 22.071189 22.064829 53: seq: 15, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x97\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x98\x80' Sent 72 22.083358 22.081238 53: seq: 16, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x98\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x99\x80' Sent 73 22.085478 22.081238 53: seq: 17, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x99\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9a\x80' Sent 74 22.087598 22.081238 53: seq: 18, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9a\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9b\x80' Sent 75 22.099736 22.097616 53: seq: 19, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9b\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9c\x80' Sent 76 22.101856 22.097616 53: seq: 1a, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9c\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9d\x80' Sent 77 22.103976 22.097616 53: seq: 1b, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9d\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9e\x80' Sent 78 22.114854 22.112734 53: seq: 1c, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9e\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9f\x80' Sent 79 22.117334 22.112734 62: seq: 1d, st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='\x9f\x88', st7920_send_data oid=0 data='\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00', st7920_send_cmds oid=0 cmds='"\x82', st7920_send_data oid=0 data='0 ', st7920_send_cmds oid=0 cmds='\x87' Sent 80 22.119654 22.112734 58: seq: 1e, st7920_send_data oid=0 data='0% 0%', st7920_send_cmds oid=0 cmds='\x8d', st7920_send_data oid=0 data=' 00:00 0 ', st7920_send_cmds oid=0 cmds='\x96', st7920_send_data oid=0 data='100%Ready ', st7920_send_cmds oid=0 cmds='&\x80\x88' Sent 81 22.131624 22.129104 63: seq: 1f, st7920_send_data oid=0 data='\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff', st7920_send_cmds oid=0 cmds='\x81\x88', st7920_send_data oid=0 data='\x80\x00', st7920_send_cmds oid=0 cmds='\x81\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x82\x80', st7920_send_data oid=0 data='?\xfc\x00\x00\x008\x00\x00\x00\x00\x0e\x00', st7920_send_cmds oid=0 cmds='\x82\x88' Sent 82 22.134064 22.129104 61: seq: 10, st7920_send_data oid=0 data='\x80\x00', st7920_send_cmds oid=0 cmds='\x82\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x83\x80', st7920_send_data oid=0 data='\x07\xe0', st7920_send_cmds oid=0 cmds='\x83\x80', st7920_send_data oid=0 data='\x07\xe0\x00\x00\x00l\x00\x00\x00\x00\x1e\x18\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x83\x8c' Sent 83 22.136504 22.129104 61: seq: 11, st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x84\x80', st7920_send_data oid=0 data='?\xfc', st7920_send_cmds oid=0 cmds='\x84\x80', st7920_send_data oid=0 data='?\xfc\x00\x00\x00l\x00\x00\x00\x00\x1e<\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x84\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x85\x80' Sent 84 22.147933 22.145493 61: seq: 12, st7920_send_data oid=0 data='\x07\xe0', st7920_send_cmds oid=0 cmds='\x85\x80', st7920_send_data oid=0 data='\x07\xe0\x00\x00\x008\x00\x00\x00\x00\x0e|\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x85\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x86\x80', st7920_send_data oid=0 data='?\xfc', st7920_send_cmds oid=0 cmds='\x86\x85' Sent 85 22.150413 22.145493 62: seq: 13, st7920_send_data oid=0 data='\x04<\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x86\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x87\x85', st7920_send_data oid=0 data='\x01\x80\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x87\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x88\x80', st7920_send_data oid=0 data='\x0f\xf0' Sent 86 22.152893 22.145493 62: seq: 14, st7920_send_cmds oid=0 cmds='\x88\x85', st7920_send_data oid=0 data='\x01\x80\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x88\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x89\x80', st7920_send_data oid=0 data='\x0f\xd0', st7920_send_cmds oid=0 cmds='\x89\x85', st7920_send_data oid=0 data='< \x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x89\x8c' Sent 87 22.163089 22.160609 62: seq: 15, st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8a\x80', st7920_send_data oid=0 data='\x0f\xf0', st7920_send_cmds oid=0 cmds='\x8a\x85', st7920_send_data oid=0 data='>p\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x8a\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8b\x85', st7920_send_data oid=0 data='<x\x00\x00\x00\x00\x80\x00' Sent 88 22.165529 22.160609 61: seq: 16, st7920_send_cmds oid=0 cmds='\x8b\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8c\x80', st7920_send_data oid=0 data='\x03\xc0', st7920_send_cmds oid=0 cmds='\x8c\x85', st7920_send_data oid=0 data='\x18x\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x8c\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8d\x80', st7920_send_data oid=0 data='\x01\x80' Sent 89 22.167769 22.160609 56: seq: 17, st7920_send_cmds oid=0 cmds='\x8d\x85', st7920_send_data oid=0 data='\x00p\x00\x00\x00\x00\x80\x00', st7920_send_cmds oid=0 cmds='\x8d\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8e\x88', st7920_send_data oid=0 data='\x80\x00', st7920_send_cmds oid=0 cmds='\x8e\x8c', st7920_send_data oid=0 data='\x00\x01', st7920_send_cmds oid=0 cmds='\x8f\x88' Sent 90 22.179223 22.177023 55: seq: 18, st7920_send_data oid=0 data='\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff', st7920_send_cmds oid=0 cmds='\x92\x82', st7920_send_data oid=0 data='\x008\x00\x00\x00\x00\xee\xec', st7920_send_cmds oid=0 cmds='\x93\x82', st7920_send_data oid=0 data='\x00l\x00\x00\x00\x00\x88\x8a', st7920_send_cmds oid=0 cmds='\x94\x82' Sent 91 22.181703 22.177023 62: seq: 19, st7920_send_data oid=0 data='\x00l\x00\x00\x00\x00\xcc\xca', st7920_send_cmds oid=0 cmds='\x95\x82', st7920_send_data oid=0 data='\x008\x00\x00\x00\x00\x88\x8a', st7920_send_cmds oid=0 cmds='\x96\x85', st7920_send_data oid=0 data='\x8e\xec', st7920_send_cmds oid=0 cmds='\x98\x85', st7920_send_data oid=0 data='\xc4\xee', st7920_send_cmds oid=0 cmds='\x99\x85', st7920_send_data oid=0 data='\xaaH' Sent 92 22.184103 22.177023 60: seq: 1a, st7920_send_cmds oid=0 cmds='\x9a\x85', st7920_send_data oid=0 data='\xceL', st7920_send_cmds oid=0 cmds='\x9b\x80', st7920_send_data oid=0 data='\x1f\xf0', st7920_send_cmds oid=0 cmds='\x9b\x85', st7920_send_data oid=0 data='\xaaH', st7920_send_cmds oid=0 cmds='\x9c\x80', st7920_send_data oid=0 data=' \x08', st7920_send_cmds oid=0 cmds='\x9c\x85', st7920_send_data oid=0 data='\xaaN', st7920_send_cmds oid=0 cmds='\x9d\x80' Sent 93 22.193775 22.193375 10: seq: 1b, st7920_send_data oid=0 data='\x7f\xfc' Sent 94 22.751714 22.751474 6: seq: 1c, get_clock Sent 95 23.360637 23.360317 8: seq: 1d, buttons_ack oid=5 count=1 Sent 96 23.446667 23.446267 10: seq: 1e, st7920_send_cmds oid=0 cmds='"\x81' Sent 97 23.449887 23.447487 60: seq: 1f, st7920_send_data oid=0 data='-100', st7920_send_cmds oid=0 cmds='\x91', st7920_send_data oid=0 data='-89 ', st7920_send_cmds oid=0 cmds='&\x82\x82', st7920_send_data oid=0 data='\x00\x008\x00', st7920_send_cmds oid=0 cmds='\x83\x82', st7920_send_data oid=0 data='\x00\x00l\x00', st7920_send_cmds oid=0 cmds='\x84\x82', st7920_send_data oid=0 data='\x00\x00l\x00' Sent 98 23.456393 23.455713 17: seq: 10, st7920_send_cmds oid=0 cmds='\x85\x82', st7920_send_data oid=0 data='\x00\x008\x00' Sent 99 23.736005 23.735765 6: seq: 11, get_clock Dumping receive queue 82 messages Receive: 0 19.270405 0.000000 6: seq: 10, starting Receive: 1 19.286596 19.276819 48: seq: 11, identify_response offset=0 data='x\xda\x9dXmo\xe3\xb8\x11\xfe+<\x03\x8b\xf6\x8a$\xb0d\xcbv\\xec\x87\xc4\xf1^\xd3\xdbds\xebM\xb7EQ\x08\x8cD\xdb' Receive: 2 19.302962 19.287208 48: seq: 12, identify_response offset=40 data='D\xf4v\x12\x95\xc4w\xc8\x7f\xef3|\x93\xecx\xf7\xd0\x06\x08,\x92\xc3\xe1p^\x9f\xe1\xef\x83\x87Vfi\xfc$\xeaF\x96E3' Receive: 3 19.318083 19.303472 48: seq: 13, identify_response offset=80 data='\x98\x0f6I2g\x7f\xfei\xb1\xf8\x91Eg\xe3\xb3!{\x90E\xabd\xd6\xd0\xec\xed=\xbb\xb4\xc3\x1fYx\x16N\xce\xc2a0\x19' Receive: 4 19.334460 19.318560 49: seq: 14, identify_response offset=120 data='\x06a48\x19$e\x9e\xf3"\x05\x93\xdf\x07<\xcb\xca\x84+\x11\x972mXR\xb6\x85z\xff.\x19\xcc\x83\xe9\t\x8eT\ng\xc5' Receive: 5 19.350833 19.334945 49: seq: 15, identify_response offset=160 data='<ydX\xc6|\x8f\xa0\xbf\x9e\xa6n\xbd\x1b\xfd#\x8b\xf7\xefZV\xb5Y\x16\xb7\x95\xa6\x1f\r\xbb\r\xbf\xb6\xa2\xdey\x96\x10\xe0' Receive: 6 19.365959 19.351306 49: seq: 16, identify_response offset=200 data='\x91\xa8k\xd1\xa8X\xc9\xe4\xb11#U\xf3\xa2\xc9\xa5\x8a\xdd\xa1L\x16\xb8\xbf\x95o\x86{d\x82\xd7q\xb3mUZ>\x17\x83\xf9\x98' Receive: 7 19.382334 19.366422 49: seq: 17, identify_response offset=240 data='\xaeV\xac\xe5\x06\x12\xbdd\xa3q\xe4\x8eh\x19\x9b\xcf\xc1|\xd2\x11\x15<+7\xb1,\xbc\xf0Z\xea\xc1<\n=\x8d\x95\xd8Q\x98' Receive: 8 19.398707 19.382804 49: seq: 18, identify_response offset=280 data="a\xdcia\xe4)S\xb9\x91\x8agq\xd9\xaa}~\xec\x89g\xad\xa0q\xd6\xbc\xcdT\xec'r\xfe\x12\xa7m\xcd\x15L\xaaO\x0e" Receive: 9 19.413835 19.399190 49: seq: 19, identify_response offset=320 data='\xbb\x93\x05\x0c\xa4\xcaj\x8fW\xd2\xd3(k\x94\xa8Q\xf7\x84\t\xce\xfd\xeem:\x1eOgC\xb7\xbbnb+\x8cp\x1f\xe9\xd8\x7f' Receive: 10 19.430271 19.414391 49: seq: 1a, identify_response offset=360 data='E\xfek\xe2\xbf\xa6\xfeKd|\xe7\xcd\x02\x11g\xfe\x10\x19&\xee\x00|BW\xc6p\xf0&\xfa\x85W\xc0\xa2f\xd3\xa4\xd3S!\xca' Receive: 11 19.446658 19.431005 49: seq: 1b, identify_response offset=400 data='J\xbe\x88\xec@I\x0f\xb03\xa9\xa3g\xffFJ\x16\xbd\xb3\xa3\xc8\xb3\xa9\x9e\xf3#\xaaNv\xf0\x89\x8e\x87U\xf4\xb6=T=f' Receive: 12 19.461720 19.447903 49: seq: 1c, identify_response offset=440 data='\xde\xe8>\xe8dl\xca\xb5\xfa\xc6\t\xff\x8b1\x87\x1d\xc3J\x1e:Y\xb0\xb7\xea\xbd\xf8\xad\xcb2\xb7\x14\xe7\xcd\xe6\xfd\xbb\xbf l\xc3' Receive: 13 19.478084 19.462340 49: seq: 1d, identify_response offset=480 data='o\xef\xb3T[H\x1a\'\xceO\xa1\xa9.\x16\x1a5=\x0f\xbd\'$\xde\x13\x9a${\xf4\xdf2\xf5\x9f\xbb"\x89\xf7\x8d\xce\x92<' Receive: 14 19.494467 19.478638 49: seq: 1e, identify_response offset=520 data='\x8d\x0f\xfd\x14\xf5N\xd0\x9e\xe8E\xc70\xb6\xfe\x9a\xca\xda}\x92)\xc9\xa3\x11pJ\xd4P\x1bq6\x11\xad9h\xb9\xc7\xdd\xcd\xd4' Receive: 15 19.509594 19.495059 49: seq: 1f, identify_response offset=560 data='V\xd4y\t\xef\xae2qD+\xfd\xe5X\xed*a\xee\xdd\x19Q\xe5I\xcbko\xbf\xfa%~\x93\x95\x98\xf2\x93\xe4\x7fJ\xe6\xc2\xb8' Receive: 16 19.525960 19.510153 49: seq: 10, identify_response offset=600 data='+\xa4H\xc5C\x0boE\x04\xa6\\q\xa3\xf7\xc9\xd8\xcdc\xd7\xa6\xb7\x10\xf8\x85Zp$\xc3:\x155\xf1\xa7\x18\xd0\x1c\xc7\xe7\x8e\xe0' Receive: 17 19.542336 19.526482 49: seq: 11, identify_response offset=640 data='\xb9\x96J\xbc\xa1F\x1f \x84ZE.\xea\x8d(\x92\x9d\xd6\x17T\x8d\x9c\x85t\x10oj\xdc\x16$#=\xd4\xba\xdc\x96\xb9x\x93' Receive: 18 19.558710 19.542860 49: seq: 12, identify_response offset=680 data='H\x1b\x9eW\xfd0\xb0c\x9fF\xf7\x13-\xae\xe2\x9d\x187\t;\xe6:MC\x06\xae\x84w\xacY\xb7L\xf1yz\x9b\xfe]j' Receive: 19 19.573835 19.559235 49: seq: 13, identify_response offset=720 data='r\x9bF\xd0\xe7Z"\xdd\xca\xdfH\x0c2\x0fK\xea\xc4D\xc9\xc9\x03FZxP\x9e\xdb\xa1&\xc2]\xc7f\xdcVd\x1c\x88\x07' Receive: 20 19.590211 19.574348 49: seq: 14, identify_response offset=760 data="N6\xb7\xe1|\xe8\x04\xae\xe9\xb33}\x1b{\x8c'\x07ddG\xd6\x99-\xc4i\x94\xb9\xf22\x95\xeb]\x0c\x1f\xf0\xbcj\xa1c" Receive: 21 19.606585 19.590738 49: seq: 15, identify_response offset=800 data='\x8d\xd9\x1a\x03\x11h\xd5l\x8b\xec6c\xeb}z\x9a\x8b3ac<2\x84\xd6\xe6\x87\xc7\x8f`H\x99\x8aB\xe1pV\xae\xd78E' Receive: 22 19.621711 19.607104 49: seq: 16, identify_response offset=840 data='G[\x97\xd0O\x06.]\xeak\x1ca\x812l\xcctP\xf2\x8eW\xd5\xc1\xfc\xdc\xd3\x1fV\xbf\xff\xd3}\xf2\xce}lV\xedF(' Receive: 23 19.638086 19.622233 49: seq: 17, identify_response offset=880 data='\xe0\x1bl\xdc\x8a\xe4\xb1W\xa6\xc2\xc8\xc9p,\xc4\xbf\x01\x07z\xc7\xec\x9dBU!\xd0\xfcZ\xa1\xbd\xd1W\xa4^\x96\xb1gouQ' Receive: 24 19.654461 19.638603 49: seq: 18, identify_response offset=920 data='\xc2\xaf\x84\x10\xd0\xbd.1\xd0\xe1\xd8~\xea\xfd\xc6\x13\x0f\xa5\xc1\x06\xb8T\x83\xab\xa4-tq\xa4\xd8{\xb9\xbbX\n\xa7\xbd-\x07\xe5' Receive: 25 19.669588 19.654984 49: seq: 19, identifyresponse offset=960 data='\xe4\x90|K\xb1\x1f\xf6\xe8\x8f\xd5 \xbf\xa9\xec\xaa"9N\xbfD\xd2\x99\xb8J\xc2\x83\xd2\x05"CS\x88\x17{g\xa4i\xef[' Receive: 26 19.686017 19.670146 49: seq: 1a, identify_response offset=1000 data='\xb268ih\x88\x9c\x08\x7fPa\xc1\x946P%;\xea\xa8\xd1\xc4\xad\x02\n\xfd\x84nq\x03\x82P\xf4\xf0\x03\xec2\xeb\xb6\x90' Receive: 27 19.702340 19.686795 49: seq: 1b, identify_response offset=1040 data='6\x9ey-\xfa{s\xd9\x94.}\xe7e#\x8f\x15\xb67L\xc7S\xc3T\x83\xcbu\x97\xb9z!EV\xd05\xf3{\x19&\x9a\xed' Receive: 28 19.717461 19.702876 49: seq: 1c, identify_response offset=1080 data='S}#\xc1\x8c\x89\nU\xc8\xe4\xee\x9e;\x8d\xf5~\x93&)\xc1!sJB\x0e>\xd1\x06P\x98-a{\xd5\xb9\xc4\xa7\x1aS' Receive: 29 19.733834 19.717971 49: seq: 1d, identify_response offset=1120 data='4\xa1\xf9\xb6J\t\xc5\x1fq\xcc\xce\xec\x93\xf0\xd5UG\x82\xfe\x17W\x8b\xf8\xe6\xe2\x9f\x04E(\x1a.\xefW\xf1\xdd\xf5\xed\x8a \x05' Receive: 30 19.750302 19.734337 49: seq: 1e, identify_response offset=1160 data='\xda\x8b\xbb\xcb\xd1\xc9\xdde\x88\xff\xd0[T\xcfz\xf1jxrwE\x0b\x8b\x8f\x9f\x16?\xc7\x1f>/\x7f!\x91\x87\xfa\xefdp' Receive: 31 19.765396 19.751276 49: seq: 1f, identify_response offset=1200 data='\xb3\xb8\x07\x15W\xb9\xd8\xf00\x9a\x0cAx\xf7\xf5\xc6\x9c\x16\x12\x8a\xfb\xbc\\,\xaf\xff\xb1\x8c\xbf^\xdf^}\xfaJ\xd05\xa4\xc9\xd5' Receive: 32 19.781767 19.766315 49: seq: 10, identify_response offset=1240 data='\xf23&\x8d\x14\xa2\x96<\xa3\xb3\x968kIga\xf5\xfa\xe2c|yq\x7fEl\xccQ\xab/\x17_V\xf1\xea\xfef\xf5\x0bV' Receive: 33 19.798331 19.782691 49: seq: 11, identify_response offset=1280 data='VKZ\x99\xd0\xf4\xf2.\xbeZ~\xbc\xf8\xd7~\x1a\xbcR\xd5jQV5:\xd3\x8d\x8fE\xac\xf4\xa9\xef4\x04\r\x9c\x86\xc6w' Receive: 34 19.813376 19.800614 49: seq: 12, identify_response offset=1320 data='\x17\xc3\xc1\xfc\xdf\xc3\x93\xd9\x7f \xf6%}\xcf\xcc\xf7\x82\xbea\x18=\xb8\xa2\x01\x0c\xac\x07K\x1a\xc0s\xf4\xe0\x03\r\xc6v\xffOz' Receive: 35 19.829754 19.815531 49: seq: 13, identify_response offset=1360 data='\x19\xfc\x8d\x06\x91e\xf0w\x1aL\xed\x9e\x9f\xf51v\xcfG=\xa0=\xaf\xc6[\xad\xa0\xda2$(\xd5d\x99 vk\xe0\x90X' Receive: 36 19.846163 19.831410 49: seq: 14, identify_response offset=1400 data='\xa6\xd6\x9cL\x9b}m\xf2\xae\xc9?\x17\x19\xb9\xc9\x8e\xb9\xf2\x9b\x1a\xa0\xbb\xe0\x05+J\xc5\xdaF0\xaa\xacu\xc0\xd6e\xcd\xa4\xbf' Receive: 37 19.861216 19.847687 49: seq: 15, identify_response offset=1440 data='\xba\xb1lh5\xd5\xf3z\xaa1\xd1\x83\xad\x7fR\x8c7\x8d\xdcho5E\xd9\xcc\xea4\xaa\xa9\xd9\xf3V\x14\x0e\x080\x9e(\xf9$' Receive: 38 19.877622 19.862328 49: seq: 16, identify_response offset=1480 data="L\x7f\xb30\xdd'\xabx\r\x1b3Q\xd7e\xad\xdbI\xb7P\x0bd\xf3Fi\xac\xf1\x81\xcb\x0c2\xa8\x92\xe9\x18\xa0\x8eC\xc7\x93A" Receive: 39 19.893989 19.878963 49: seq: 17, identify_response offset=1520 data='A\xd7\x05\x9c[\xa6\xccui]\xcfhR\xbe\xc9\xed\x8e\xca\xb6\xbd:\xfdus #Qx.P/L]p\x8by\xf9$\x9c4' Receive: 40 19.909112 19.895287 49: seq: 18, identify_response offset=1560 data='\x80\xc8\xbf\t\x03\xf4\xdc2\xee\xce\x08x\x1a\xd0\xe4f\t\xea\xbb\x18\xa3^\xa97O\x99\x0cI\xc0\x9f\xd6\x98\x94\xef(\xf6\xaaa\xb2\x95' Receive: 41 19.925477 19.910335 49: seq: 19, identify_response offset=1600 data='\x95\xe5N\xe8\xe9\x86\xbf\x90ag\xee\xaa\x06\x14\xde\xa0\xbf\xe2\x1b\xc1\x80\x15\x91\xe7\x9ciA6d:[L\x08\xabb3\xa5{&' Receive: 42 19.941843 19.926925 49: seq: 1a, identify_response offset=1640 data='\x9e\x04\xe9\x85\xda\xe7o\x13my\r\xfb<\xe7\x8e\x9a\x80\xca\xb7\xa9\x115\x8e\x90\x1a\x93\xef\x10v\x1c\xa97\xba!\xf5\xea\xc2\xcdD^' Receive: 43 19.956951 19.943059 49: seq: 1b, identifyresponse offset=1680 data='\xa9\x9d\xc1K\xb7\xa5!&\xd71X\xe1\x16~\xca\x99\xd1\x119\xb9\x8eRj\x14\xfa\x0b\xf0\\xbb0\xdb\x90Ee\xaa\x97\x01\x97z' Receive: 44 19.973272 19.957905 49: seq: 1c, identify_response offset=1720 data='\xa9\xa0@\xf1\xd3\x94>i;\xb7\xa1R\xd5\xe5\x06\x16\xcaq\t\xaeP\x0f\xd7(\x13\x10\x1a\x16\x14\x14>\x84-?\x0bW\xa7S\x13\x1b' Receive: 45 19.989592 19.974059 49: seq: 1d, identify_response offset=1760 data='8\x86\xec\x07\xdb\x92\xe3R\xe5Z!\x10\x8c\xb1\xf4$a\x16\x99\xb7\xb9\x9bs\xfe\x19\x19J\x17({\xa4n\xd2\xd2\x12\x02Y\xb96Q' Receive: 46 20.004715 19.990282 49: seq: 1e, identifyresponse offset=1800 data='\xe3R\x9c\xae\xc3\x8c"\xb9{\x06\x81K\xad\xecNU\x96l\xcd\xb5tF2*H\xfa~\xf66k\xd0C\xcd\x1e\ti\x05\xbct' Receive: 47 20.021089 20.005267 49: seq: 1f, identify_response offset=1840 data='\xbbk0\xf3\x17}eb\x8e\x82\xd6\x08\xfd\x0cr_4mU\x95\xb5\x12&Lu\xca\xa2n\xe6+W\xc96-7FQ?\x98^' Receive: 48 20.037476 20.021640 49: seq: 10, identify_response offset=1880 data="H?;\x01\x19\xb6\xc5#\x18S\x8c\x9b'\xa7\xde|\xd3-to6&\xc1\x94E\xb6c\xfc\t\xcb\xfc!s\xa9\xc6\xdf\xdf\xa0s}" Receive: 49 20.052587 20.038021 49: seq: 11, identify_response offset=1920 data='\x1cnfz\x88\x03\x94?g\x9f\xd2\x94\xa1"<\x10\x02XS\xf7\xd7\xfcJ\xbfq>\xc0\r\xe3\xae/\x8a\xda\x1d\xfc\xcaF\x91/' Receive: 50 20.068959 20.053134 49: seq: 12, identify_response offset=1960 data='c\xd2<\xb4\xe8\xf72\xe72\xee\x15-5}}C\x98\xbe\x10\x99\xf5\x8d\x04\xcb\xdas|E\xd7\x10A+0\xe3\xb5V\xfa\x14Y\xfd' Receive: 51 20.085334 20.069479 49: seq: 13, identify_response offset=2000 data="MKKi\x1d5s\x14\xcc\xa2\x08\x89\xff\xc4\r&\xba50\x83I\xa4-\x8e\xc1d2\xc5\xf7\xe8\xf5U\xc3\xd9\nYB\x98'>" Receive: 52 20.101708 20.085868 49: seq: 14, identify_response offset=2040 data='\xd3\x19\xecA\x94\x86\xb2Z\x91\xd8\xc7\x11\x8fWf\x10\xd1\x91\xf70\x07>\x03\xd7\x1d\xd3 \xf4\x83L\xf6\x1e\xe8\xc0\xaa\xcf\x17\xec\xc2\x8e' Receive: 53 20.116833 20.102230 49: seq: 15, identify_response offset=2080 data="\x9dN\xdb\xdd\x13\x01\x06\x1dK=\x0c\xbb\xfe{\x06\x7f\xf2\xfd\xc9^\x03\xaasC|\x0c<O'\xdd\xfb\xe2\xde\x0e\xdek>\x98^\xb1" Receive: 54 20.133212 20.117349 49: seq: 16, identify_response offset=2120 data='w\xa5\x07\x18\x8d\xf5;T6\xf5\x8f2(\x7f\xb6\t\xd5\xb8O7\xab\xba \xf4.\x0b\x12\xe7u\xe6I4\xe8^\x01\x1a\x04\x8bo\xea' Receive: 55 20.149587 20.133743 49: seq: 17, identify_response offset=2160 data='\xa7\xbd\x8e}O6\xb4\xefp*\xfb,\xd4\xeb\xc2\xa7Q\xd7a\xc6\xce\x98]\xabi\xc6\xe6\x1a\xd3\xf3\xae\x89\xec\x91\xfan\xd2\x18\xf7\x8c' Receive: 56 20.164712 20.150171 49: seq: 18, identify_response offset=2200 data='Hq\xb9\x9e\xc8\xec\x10D\x18=N\xa0G\xf0\xe8\xbfnL\t\x11w\x89\xc7\xb5\x89\xc7\xb7\x1f\xe0\xeb?\x92~j\x012xsd' Receive: 57 20.181088 20.165223 49: seq: 19, identifyresponse offset=2240 data='\xa0\x8d\x7f\x88\xc6)mn\x7f\x9a\xcd\xdbL\x0f8\x1f\x80f\xf3\xfc\x00\x884\x1d\x1f\x04\x93\xb5\xc7\xf7|\xa85\t\xce\xa8\x7f\xd6a' Receive: 58 20.197541 20.181616 49: seq: 1a, identify_response offset=2280 data='\xef\xb7\xf2\x13\xea\xd6\x0e\x14\x10\xec\xd6`g+7[\xdd\x1dyO\x9a\x9c#\x0c\xedk=@\xec\xd3\xf0lv6<\x9d\x8d\xa2\xd3M' Receive: 59 20.212641 20.199014 44: seq: 1b, identify_response offset=2320 data='\xb2\x9e\xa4\xa3a\xc8O\xc3a8\x0c\x86\xc1y\x0c\xf4\x1b\x06\xb3\xd3\x9c\xcb\xa2AR+\x9b\xc1\xeb\x7f\x01\xbah\xf6\x1e' Receive: 60 20.228964 20.213423 9: seq: 1c, identify_response offset=2355 data='' Receive: 61 20.244926 20.244459 11: seq: 1d, uptime high=0 clock=15507674 Receive: 62 20.324313 20.311447 10: seq: 1e, clock clock=16571826 Receive: 63 20.388560 20.376130 10: seq: 1f, clock clock=17599654 Receive: 64 20.452879 20.440076 10: seq: 10, clock clock=18615811 Receive: 65 20.515816 20.506910 10: seq: 11, clock clock=19678135 Receive: 66 20.580058 20.567212 10: seq: 12, clock clock=20636183 Receive: 67 20.644307 20.631321 10: seq: 13, clock clock=21655175 Receive: 68 20.707367 20.696041 10: seq: 14, clock clock=22683883 Receive: 69 20.771630 20.762165 10: seq: 15, clock clock=23734737 Receive: 70 20.788007 20.782224 10: seq: 16, clock clock=24053635 Receive: 71 21.778341 21.766822 10: seq: 17, clock clock=39699865 Receive: 72 21.842564 21.837187 10: seq: 18, config is_config=0 crc=0 move_count=0 is_shutdown=0 Receive: 73 21.889192 21.877824 15: seq: 17, config is_config=1 crc=3965943724 move_count=643 is_shutdown=0 Receive: 74 22.752354 22.751714 10: seq: 1d, clock clock=55351303 Receive: 75 23.359582 22.751714 10: seq: 1d, buttons_state oid=5 ack_count=0 state='\x07' Receive: 76 23.422436 23.360637 13: seq: 1e, analog_in_state oid=11 next_clock=70560000 value=8184 Receive: 77 23.726133 23.456393 13: seq: 11, analog_in_state oid=11 next_clock=75360000 value=8184 Receive: 78 23.742619 23.736005 10: seq: 12, clock clock=70992959 Receive: 79 24.029772 23.736005 13: seq: 12, analog_in_state oid=11 next_clock=80160000 value=8184 Receive: 80 24.318267 23.736005 15: seq: 12, stats count=249 sum=1367878 sumsq=99162476 Receive: 81 24.333552 23.736005 11: seq: 12, shutdown clock=80288176 static_string_id=ADC out of range Stats 24.9: gcodein=0 mcu: mcu_awake=0.085 mcu_task_avg=0.000343 mcu_task_stddev=0.000529 bytes_write=3869 bytes_read=3900 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=163 retransmit_seq=0 srtt=0.012 rttvar=0.003 rto=0.025 ready_bytes=12 stalled_bytes=0 freq=15891394 z: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=876 bytes_read=3569 bytes_retransmit=0 bytes_invalid=3 send_seq=104 receive_seq=104 retransmit_seq=0 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15898770 adj=16000012 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=1.03 cputime=3.128 memavail=775200 Stats 25.9: gcodein=0 mcu: mcu_awake=0.085 mcu_task_avg=0.000343 mcu_task_stddev=0.000529 bytes_write=3921 bytes_read=4091 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.013 rttvar=0.003 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891394 z: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=882 bytes_read=3623 bytes_retransmit=0 bytes_invalid=3 send_seq=105 receive_seq=105 retransmit_seq=0 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15898913 adj=16001851 heater_bed: target=0 temp=-46.6 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.95 cputime=3.151 memavail=775236 Stats 26.9: gcodein=0 mcu: mcu_awake=0.085 mcu_task_avg=0.000343 mcu_task_stddev=0.000529 bytes_write=3989 bytes_read=4221 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891402 z: mcu_awake=0.024 mcu_task_avg=0.000147 mcu_task_stddev=0.000396 bytes_write=888 bytes_read=3692 bytes_retransmit=0 bytes_invalid=3 send_seq=106 receive_seq=106 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15898997 adj=16003537 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.95 cputime=3.185 memavail=775236 Stats 27.9: gcodein=0 mcu: mcu_awake=0.085 mcu_task_avg=0.000343 mcu_task_stddev=0.000529 bytes_write=4044 bytes_read=4337 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891381 z: mcu_awake=0.024 mcu_task_avg=0.000147 mcu_task_stddev=0.000396 bytes_write=894 bytes_read=3759 bytes_retransmit=0 bytes_invalid=3 send_seq=107 receive_seq=107 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899082 adj=16004715 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000 sysload=0.95 cputime=3.216 memavail=775360 Stats 28.9: gcodein=0 mcu: mcu_awake=0.085 mcu_task_avg=0.000343 mcu_task_stddev=0.000529 bytes_write=4110 bytes_read=4480 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.012 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891370 z: mcu_awake=0.024 mcu_task_avg=0.000147 mcu_task_stddev=0.000396 bytes_write=900 bytes_read=3813 bytes_retransmit=0 bytes_invalid=3 send_seq=108 receive_seq=108 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899127 adj=16005726 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000 sysload=0.95 cputime=3.247 memavail=775360 Stats 29.9: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000081 bytes_write=4176 bytes_read=4623 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.011 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891362 z: mcu_awake=0.024 mcu_task_avg=0.000147 mcu_task_stddev=0.000396 bytes_write=906 bytes_read=3867 bytes_retransmit=0 bytes_invalid=3 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899176 adj=16006742 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.95 cputime=3.280 memavail=775364 Stats 30.9: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000081 bytes_write=4229 bytes_read=4739 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891357 z: mcu_awake=0.024 mcu_task_avg=0.000147 mcu_task_stddev=0.000396 bytes_write=912 bytes_read=3934 bytes_retransmit=0 bytes_invalid=3 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899210 adj=16007183 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=0.87 cputime=3.311 memavail=775364 Stats 31.9: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000081 bytes_write=4291 bytes_read=4883 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891353 z: mcu_awake=0.004 mcu_task_avg=0.000054 mcu_task_stddev=0.000050 bytes_write=918 bytes_read=4001 bytes_retransmit=0 bytes_invalid=3 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899211 adj=16007482 heater_bed: target=0 temp=-49.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.87 cputime=3.341 memavail=775364 Stats 32.9: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000081 bytes_write=4357 bytes_read=5017 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891349 z: mcu_awake=0.004 mcu_task_avg=0.000054 mcu_task_stddev=0.000050 bytes_write=924 bytes_read=4055 bytes_retransmit=0 bytes_invalid=3 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899227 adj=16007606 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.87 cputime=3.373 memavail=775364 Stats 34.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000081 bytes_write=4419 bytes_read=5151 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891352 z: mcu_awake=0.004 mcu_task_avg=0.000054 mcu_task_stddev=0.000050 bytes_write=930 bytes_read=4126 bytes_retransmit=0 bytes_invalid=3 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899233 adj=16007758 heater_bed: target=0 temp=-38.9 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-38.9 pwm=0.000 sysload=0.87 cputime=3.405 memavail=775364 Stats 35.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000069 bytes_write=4485 bytes_read=5312 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891353 z: mcu_awake=0.004 mcu_task_avg=0.000054 mcu_task_stddev=0.000050 bytes_write=936 bytes_read=4184 bytes_retransmit=0 bytes_invalid=3 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899237 adj=16007813 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.87 cputime=3.437 memavail=775364 Stats 36.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000069 bytes_write=4549 bytes_read=5446 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891352 z: mcu_awake=0.004 mcu_task_avg=0.000054 mcu_task_stddev=0.000050 bytes_write=942 bytes_read=4242 bytes_retransmit=0 bytes_invalid=3 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899243 adj=16007851 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.80 cputime=3.468 memavail=775364 Stats 37.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000069 bytes_write=4615 bytes_read=5580 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891351 z: mcu_awake=0.004 mcu_task_avg=0.000055 mcu_task_stddev=0.000052 bytes_write=948 bytes_read=4313 bytes_retransmit=0 bytes_invalid=3 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899247 adj=16007906 heater_bed: target=0 temp=-46.6 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.7 pwm=0.000 sysload=0.80 cputime=3.513 memavail=775300 Stats 38.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000069 bytes_write=4679 bytes_read=5728 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891350 z: mcu_awake=0.004 mcu_task_avg=0.000055 mcu_task_stddev=0.000052 bytes_write=954 bytes_read=4385 bytes_retransmit=0 bytes_invalid=3 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899251 adj=16007940 heater_bed: target=0 temp=-46.6 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.80 cputime=3.551 memavail=775300 Stats 39.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000069 bytes_write=4743 bytes_read=5862 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891350 z: mcu_awake=0.004 mcu_task_avg=0.000055 mcu_task_stddev=0.000052 bytes_write=960 bytes_read=4443 bytes_retransmit=0 bytes_invalid=3 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899255 adj=16007963 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.80 cputime=3.586 memavail=775304 Stats 40.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000067 bytes_write=4809 bytes_read=6009 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.011 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891349 z: mcu_awake=0.004 mcu_task_avg=0.000055 mcu_task_stddev=0.000052 bytes_write=966 bytes_read=4501 bytes_retransmit=0 bytes_invalid=3 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899261 adj=16007987 heater_bed: target=0 temp=-49.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000 sysload=0.80 cputime=3.620 memavail=775304 Stats 41.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000067 bytes_write=4857 bytes_read=6138 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891357 z: mcu_awake=0.004 mcu_task_avg=0.000055 mcu_task_stddev=0.000052 bytes_write=972 bytes_read=4573 bytes_retransmit=0 bytes_invalid=3 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899268 adj=16008014 heater_bed: target=0 temp=-49.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.74 cputime=3.655 memavail=775304 Stats 42.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000067 bytes_write=4923 bytes_read=6272 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.011 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891366 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000058 bytes_write=978 bytes_read=4644 bytes_retransmit=0 bytes_invalid=3 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899288 adj=16007996 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=0.74 cputime=3.691 memavail=775504 Stats 43.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000067 bytes_write=4989 bytes_read=6406 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15891367 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000058 bytes_write=984 bytes_read=4702 bytes_retransmit=0 bytes_invalid=3 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899291 adj=16008045 heater_bed: target=0 temp=-46.6 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.74 cputime=3.729 memavail=775584 Stats 44.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000067 bytes_write=5055 bytes_read=6540 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891365 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000058 bytes_write=990 bytes_read=4774 bytes_retransmit=0 bytes_invalid=3 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899294 adj=16008035 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.74 cputime=3.764 memavail=775584 Stats 45.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=5103 bytes_read=6682 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.011 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891362 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000058 bytes_write=996 bytes_read=4832 bytes_retransmit=0 bytes_invalid=3 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008053 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=0.74 cputime=3.799 memavail=775584 Stats 46.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=5169 bytes_read=6816 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891360 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000058 bytes_write=1002 bytes_read=4890 bytes_retransmit=0 bytes_invalid=3 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008047 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000 sysload=0.68 cputime=3.834 memavail=775584 Stats 47.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=5235 bytes_read=6950 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891357 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1008 bytes_read=4975 bytes_retransmit=0 bytes_invalid=3 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008047 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.68 cputime=3.869 memavail=775584 Stats 48.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=5269 bytes_read=7060 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891355 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1014 bytes_read=5033 bytes_retransmit=0 bytes_invalid=3 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899292 adj=16008054 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.68 cputime=3.902 memavail=775584 Stats 49.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=5335 bytes_read=7194 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891355 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1020 bytes_read=5091 bytes_retransmit=0 bytes_invalid=3 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008047 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.68 cputime=3.935 memavail=776128 Stats 50.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000069 bytes_write=5401 bytes_read=7341 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891354 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1026 bytes_read=5163 bytes_retransmit=0 bytes_invalid=3 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008040 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.68 cputime=3.970 memavail=776148 Stats 51.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000069 bytes_write=5454 bytes_read=7475 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.011 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891352 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1032 bytes_read=5221 bytes_retransmit=0 bytes_invalid=3 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899293 adj=16008037 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.62 cputime=4.004 memavail=776148 Stats 52.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000069 bytes_write=5520 bytes_read=7609 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891351 z: mcu_awake=0.004 mcu_task_avg=0.000060 mcu_task_stddev=0.000059 bytes_write=1038 bytes_read=5292 bytes_retransmit=0 bytes_invalid=3 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899294 adj=16008038 heater_bed: target=0 temp=-57.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.62 cputime=4.037 memavail=776148 Stats 53.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000069 bytes_write=5586 bytes_read=7743 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891350 z: mcu_awake=0.004 mcu_task_avg=0.000060 mcu_task_stddev=0.000059 bytes_write=1044 bytes_read=5364 bytes_retransmit=0 bytes_invalid=3 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899294 adj=16008039 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.62 cputime=4.071 memavail=776148 Stats 54.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000069 bytes_write=5630 bytes_read=7863 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891350 z: mcu_awake=0.004 mcu_task_avg=0.000060 mcu_task_stddev=0.000059 bytes_write=1050 bytes_read=5422 bytes_retransmit=0 bytes_invalid=3 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899302 adj=16008039 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=0.62 cputime=4.104 memavail=776148 Stats 55.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=5687 bytes_read=7996 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891349 z: mcu_awake=0.004 mcu_task_avg=0.000060 mcu_task_stddev=0.000059 bytes_write=1056 bytes_read=5480 bytes_retransmit=0 bytes_invalid=3 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899303 adj=16008090 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.62 cputime=4.138 memavail=776148 Stats 56.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=5751 bytes_read=8130 bytes_retransmit=0 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891347 z: mcu_awake=0.004 mcu_task_avg=0.000060 mcu_task_stddev=0.000059 bytes_write=1062 bytes_read=5538 bytes_retransmit=0 bytes_invalid=3 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899303 adj=16008086 heater_bed: target=0 temp=-38.9 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000 sysload=0.57 cputime=4.171 memavail=776148 Stats 57.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=5817 bytes_read=8278 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891346 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000055 bytes_write=1068 bytes_read=5623 bytes_retransmit=0 bytes_invalid=3 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899309 adj=16008086 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-46.9 pwm=0.000 sysload=0.57 cputime=4.206 memavail=776148 Stats 58.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=5872 bytes_read=8398 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891344 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000055 bytes_write=1074 bytes_read=5681 bytes_retransmit=0 bytes_invalid=3 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008125 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.57 cputime=4.241 memavail=776148 Stats 59.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=5936 bytes_read=8532 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15891343 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000055 bytes_write=1080 bytes_read=5739 bytes_retransmit=0 bytes_invalid=3 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899307 adj=16008101 heater_bed: target=0 temp=-37.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.57 cputime=4.274 memavail=776148 Stats 60.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6000 bytes_read=8693 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891341 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000055 bytes_write=1086 bytes_read=5811 bytes_retransmit=0 bytes_invalid=3 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008086 heater_bed: target=0 temp=-52.8 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000 sysload=0.57 cputime=4.309 memavail=776148 Stats 61.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6053 bytes_read=8813 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891340 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000055 bytes_write=1092 bytes_read=5869 bytes_retransmit=0 bytes_invalid=3 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899307 adj=16008087 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.53 cputime=4.342 memavail=776148 Stats 62.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6117 bytes_read=8947 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891339 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000056 bytes_write=1098 bytes_read=5940 bytes_retransmit=0 bytes_invalid=3 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899306 adj=16008070 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000 sysload=0.53 cputime=4.376 memavail=776148 Stats 63.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6183 bytes_read=9081 bytes_retransmit=0 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891338 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000056 bytes_write=1104 bytes_read=6012 bytes_retransmit=0 bytes_invalid=3 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899305 adj=16008062 heater_bed: target=0 temp=-52.8 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.53 cputime=4.410 memavail=776148 Stats 64.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6238 bytes_read=9215 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891338 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000056 bytes_write=1110 bytes_read=6070 bytes_retransmit=0 bytes_invalid=3 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899306 adj=16008058 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.53 cputime=4.443 memavail=776148 Stats 65.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000070 bytes_write=6274 bytes_read=9311 bytes_retransmit=0 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891338 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000056 bytes_write=1116 bytes_read=6128 bytes_retransmit=0 bytes_invalid=3 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899306 adj=16008051 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.53 cputime=4.475 memavail=776148 Stats 66.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000067 bytes_write=6340 bytes_read=9458 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891337 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000056 bytes_write=1122 bytes_read=6200 bytes_retransmit=0 bytes_invalid=3 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899306 adj=16008048 heater_bed: target=0 temp=-49.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.7 pwm=0.000 sysload=0.48 cputime=4.510 memavail=776148 Stats 67.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000067 bytes_write=6402 bytes_read=9606 bytes_retransmit=0 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891336 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000055 bytes_write=1128 bytes_read=6271 bytes_retransmit=0 bytes_invalid=3 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899307 adj=16008057 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.48 cputime=4.546 memavail=776148 Stats 68.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000067 bytes_write=6459 bytes_read=9726 bytes_retransmit=0 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15891334 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000055 bytes_write=1134 bytes_read=6329 bytes_retransmit=0 bytes_invalid=3 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008063 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.7 pwm=0.000 sysload=0.48 cputime=4.579 memavail=776148 Stats 69.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000067 bytes_write=6525 bytes_read=9860 bytes_retransmit=0 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891332 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000055 bytes_write=1140 bytes_read=6401 bytes_retransmit=0 bytes_invalid=3 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899310 adj=16008089 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.48 cputime=4.615 memavail=776176 Stats 70.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000067 bytes_write=6580 bytes_read=9994 bytes_retransmit=0 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891330 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000055 bytes_write=1146 bytes_read=6459 bytes_retransmit=0 bytes_invalid=3 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899310 adj=16008105 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.48 cputime=4.648 memavail=776176 Stats 71.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000073 bytes_write=6630 bytes_read=10122 bytes_retransmit=0 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15891330 z: mcu_awake=0.004 mcu_task_avg=0.000058 mcu_task_stddev=0.000055 bytes_write=1152 bytes_read=6517 bytes_retransmit=0 bytes_invalid=3 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899311 adj=16008106 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.44 cputime=4.682 memavail=776176 Stats 72.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000073 bytes_write=6696 bytes_read=10256 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891329 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000056 bytes_write=1158 bytes_read=6588 bytes_retransmit=0 bytes_invalid=3 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899310 adj=16008098 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.44 cputime=4.717 memavail=776176 Stats 73.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000073 bytes_write=6766 bytes_read=10420 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891327 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000056 bytes_write=1164 bytes_read=6660 bytes_retransmit=0 bytes_invalid=3 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899310 adj=16008081 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.44 cputime=4.753 memavail=776176 Stats 74.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000073 bytes_write=6821 bytes_read=10540 bytes_retransmit=0 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891327 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000056 bytes_write=1170 bytes_read=6718 bytes_retransmit=0 bytes_invalid=3 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899309 adj=16008088 heater_bed: target=0 temp=-44.2 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.44 cputime=4.786 memavail=776176 Stats 75.0: gcodein=0 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000073 bytes_write=6887 bytes_read=10674 bytes_retransmit=0 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891326 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000056 bytes_write=1176 bytes_read=6776 bytes_retransmit=0 bytes_invalid=3 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008072 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000 sysload=0.44 cputime=4.820 memavail=776176 Stats 76.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000067 bytes_write=6951 bytes_read=10835 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891325 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000056 bytes_write=1182 bytes_read=6848 bytes_retransmit=0 bytes_invalid=3 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008065 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.7 pwm=0.000 sysload=0.41 cputime=4.855 memavail=776176 Stats 77.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000067 bytes_write=7017 bytes_read=10969 bytes_retransmit=0 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891324 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1194 bytes_read=6935 bytes_retransmit=0 bytes_invalid=3 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008064 heater_bed: target=0 temp=-42.3 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.1 pwm=0.000 sysload=0.41 cputime=4.890 memavail=776176 Stats 78.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000067 bytes_write=7072 bytes_read=11089 bytes_retransmit=0 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=0 srtt=0.007 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15891324 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1200 bytes_read=6993 bytes_retransmit=0 bytes_invalid=3 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899308 adj=16008062 heater_bed: target=0 temp=-40.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000 sysload=0.41 cputime=4.924 memavail=776176 Stats 79.0: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000067 bytes_write=7136 bytes_read=11223 bytes_retransmit=0 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15891324 z: mcu_awake=0.004 mcu_task_avg=0.000057 mcu_task_stddev=0.000057 bytes_write=1206 bytes_read=7065 bytes_retransmit=0 bytes_invalid=3 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15899307 adj=16008056 heater_bed: target=0 temp=-88.5 pwm=0.000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000 sysload=0.41 cputime=4.959 memavail=776216

[jakep82]

You can't use generic USB serial devices when defining multiple MCUs. They can connect in any order. You need to use by-id or by-path. Read the Klipper installation document to see how to find the proper serial device names.

[bojfik]

did you read with understanding what I wrote? this was configured on the old Klipper firmware and worked fine unless something changed in the latest firmware.

śr., 21 paź 2020, 07:22 użytkownik jakep82 notifications@github.com napisał:

You can't use generic USB serial devices when defining multiple MCUs. They can connect in any order. You need to use by-id or by-path. Read the Klipper installation document to see how to find the proper serial devices names.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/KevinOConnor/klipper/issues/3449#issuecomment-713310787, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQ3B4CPHHVSHWRO2UJ2ZBFDSLZV2TANCNFSM4SWRXFCQ .

[jakep82]

Nothing has changed with regard to pin definitions for RAMPS. If it worked previously, it was only because you were lucky and the boards happened to connect in the correct order. When your main MCU and your Z MCU connect, either one can be assigned USB0, and the other will become USB1. You need to specify which MCU is which by using specific serial device definitions. Take a look at the generic Voron config files to see how your MCU serial devices should be defined.

https://github.com/VoronDesign/Voron-2/blob/V2.4/firmware/klipper_configurations/VORON2_stock_250_printer.cfg#L69

[bojfik]

OK sorry. my mistake

śr., 21 paź 2020, 08:11 użytkownik jakep82 notifications@github.com napisał:

Nothing has changed with regard to pin definitions for RAMPS. If it worked previously, it was only because you were lucky and the boards happened to connect in the correct order. When your main MCU and your Z MCU connect, either one can be assigned USB0, and the other will become USB1. You need to specify which MCU is which by using specific serial device definitions. Take a look at the generic Voron config files to see how your MCU serial devices should be defined.

https://github.com/VoronDesign/Voron-2/blob/V2.4/firmware/klipper_configurations/VORON2_stock_250_printer.cfg#L69

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/KevinOConnor/klipper/issues/3449#issuecomment-713329977, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQ3B4CKS7UZVNLU2HULCSPLSLZ3PPANCNFSM4SWRXFCQ .

[github-actions[bot]]

Hello,

It looks like there hasn't been any recent updates on this Klipper github issue. If you created this issue and no longer consider it open, then please login to github and close the issue. Otherwise, if there is no further activity on this thread then it will be automatically closed in a few days.

Best regards,

~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being.