Klipper Fails to Home after printing

[hcker2000]

After printing the hot end sits on the top of the printed part due to a failure to home. I would say 95% of this happens. Every so often it will home correctly.

If I run G28 X by hand from the terminal it works every time, even after it fails. I have also tried G28 X0 with the same results. I have also confirmed that the end gcode is actually at the end of my sliced file and it is.

Here is my end gcode from SuperSlicer

M104 S0 ; turn off temperature
G28 X  ; home X axis
M84     ; disable motors

Here is the log file. It happened on the last print of the log. klippy.zip

If you need any more information or logs please let me know and I will be happy to get that for you.

[github-actions[bot]]

It looks like this ticket is a request for help (or similar). Many helpful people will not see your message here and you are unlikely to get a useful response. Instead, see the contact directions at: https://www.klipper3d.org/Contact.html

We use github to share the results of work done to improve Klipper. We don't use github for requests. (In particular, we don't use github for feature requests, to answer questions, nor to help diagnose problems with a printer.)

Please follow the directions at: https://www.klipper3d.org/Contact.html

This ticket will be automatically closed.

Best regards, ~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being.