timmit99
commented
2 years ago 2 things,
1) ATTACH your log instead of copying and pasting it,
and
2) Your serial port value isn't correct as shown by the repeated error mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0:
We have ZERO additional information needed to help fix this issue.
- What printer?
- What board?
- What version of klipper?
- Have you flashed said controller with klipper?
- Are you able to get a serial port when you run
ls /dev/serial/by-id/*command?
@Youpgame This kind of issues is more with the setup of klipper and not with the source code/development of the firmware so I'd suggest moving this to the Discord server or discourse forum.
github-actions[bot]
===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 position_endstop = 0.0 endstop_pin = ^PA7 position_max = 400
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds'] Git version: u'v0.10.0-66-g5c10001b' CPU: 4 core ARMv7 Processor rev 4 (v7l) Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]' webhooks client 1969005392: {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} =============== Log rollover at Tue Oct 19 16:01:58 2021 =============== mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' MCU error during connect Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 158, in _connect self.send_event("klippy:mcu_identify") File "/home/pi/klipper/klippy/klippy.py", line 248, in send_event return [cb(*params) for cb in self.event_handlers.get(event, [])] File "/home/pi/klipper/klippy/mcu.py", line 769, in _mcu_identify raise error(str(e)) error: mcu 'mcu': Unable to connect Build file /home/pi/klipper/klippy/../.config(2523): Mon Oct 18 22:05:57 2021 ========= Last MCU build config ========= CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR is not set
CONFIG_MACH_ATSAM is not set
CONFIG_MACH_ATSAMD is not set
CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
CONFIG_MACH_RP2040 is not set
CONFIG_MACH_PRU is not set
CONFIG_MACH_LINUX is not set
CONFIG_MACH_SIMU is not set
CONFIG_STEP_DELAY=2 CONFIG_BOARD_DIRECTORY="stm32" CONFIG_MCU="stm32f103xe" CONFIG_CLOCK_FREQ=72000000 CONFIG_SERIAL=y CONFIG_FLASH_START=0x8007000 CONFIG_FLASH_SIZE=0x10000 CONFIG_RAM_START=0x20000000 CONFIG_RAM_SIZE=0x5000 CONFIG_STACK_SIZE=512 CONFIG_STM32_SELECT=y CONFIG_MACH_STM32F103=y
CONFIG_MACH_STM32F207 is not set
CONFIG_MACH_STM32F401 is not set
CONFIG_MACH_STM32F405 is not set
CONFIG_MACH_STM32F407 is not set
CONFIG_MACH_STM32F429 is not set
CONFIG_MACH_STM32F446 is not set
CONFIG_MACH_STM32F031 is not set
CONFIG_MACH_STM32F042 is not set
CONFIG_MACH_STM32F070 is not set
CONFIG_MACH_STM32F072 is not set
CONFIG_MACH_STM32H750 is not set
CONFIG_MACH_STM32F1=y CONFIG_HAVE_STM32_USBFS=y CONFIG_HAVE_STM32_CANBUS=y
CONFIG_STM32_FLASH_START_2000 is not set
CONFIG_STM32_FLASH_START_5000 is not set
CONFIG_STM32_FLASH_START_7000=y
CONFIG_STM32_FLASH_START_8000 is not set
CONFIG_STM32_FLASH_START_8800 is not set
CONFIG_STM32_FLASH_START_10000 is not set
CONFIG_STM32_FLASH_START_800 is not set
CONFIG_STM32_FLASH_START_4000 is not set
CONFIG_STM32_FLASH_START_0000 is not set
CONFIG_STM32_CLOCK_REF_8M=y
CONFIG_STM32_CLOCK_REF_12M is not set
CONFIG_STM32_CLOCK_REF_16M is not set
CONFIG_STM32_CLOCK_REF_25M is not set
CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=8000000 CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12 is not set
CONFIG_STM32_SERIAL_USART1 is not set
CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
CONFIG_STM32_SERIAL_USART2 is not set
CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
CONFIG_STM32_SERIAL_USART3=y
CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
CONFIG_STM32_CANBUS_PA11_PA12 is not set
CONFIG_STM32_CANBUS_PB8_PB9 is not set
CONFIG_CANBUS_FREQUENCY=500000 CONFIG_SERIAL_BAUD=250000 CONFIG_USB_VENDOR_ID=0x1d50 CONFIG_USB_DEVICE_ID=0x614e CONFIG_USB_SERIAL_NUMBER_CHIPID=y CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CUSTOM_STEP_DELAY is not set
CONFIG_INITIAL_PINS="" CONFIG_HAVE_GPIO=y CONFIG_HAVE_GPIO_ADC=y CONFIG_HAVE_GPIO_SPI=y CONFIG_HAVE_GPIO_I2C=y CONFIG_HAVE_GPIO_HARD_PWM=y CONFIG_HAVE_GPIO_BITBANGING=y CONFIG_HAVE_STRICT_TIMING=y CONFIG_HAVE_CHIPID=y CONFIG_INLINE_STEPPER_HACK=y
Build file /home/pi/klipper/klippy/../out/klipper.dict(6811): Mon Oct 18 22:06:37 2021 Last MCU build version: v0.10.0-66-g5c10001b Last MCU build tools: gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1 Last MCU build config: BUS_PINS_i2c1=PB6,PB7 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 STEP_DELAY=2 SERIAL_BAUD=250000 ADC_MAX=4095 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 PWM_MAX=255 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 CLOCK_FREQ=72000000 Build file /home/pi/klipper/klippy/../out/klipper.elf(251392): Mon Oct 18 22:06:45 2021 webhooks client 1969005392: Disconnected Restarting printer Start printer at Tue Oct 19 16:04:43 2021 (1634655883.5 217.2) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 position_endstop = 0.0 endstop_pin = ^PA7 position_max = 400
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Extruder max_extrude_ratio=0.266081 mcu 'mcu': Starting serial connect mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' webhooks client 1968802072: New connection webhooks client 1968802072: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' MCU error during connect Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 158, in _connect self.send_event("klippy:mcu_identify") File "/home/pi/klipper/klippy/klippy.py", line 248, in send_event return [cb(*params) for cb in self.event_handlers.get(event, [])] File "/home/pi/klipper/klippy/mcu.py", line 769, in _mcu_identify raise error(str(e)) error: mcu 'mcu': Unable to connect Build file /home/pi/klipper/klippy/../.config(2523): Mon Oct 18 22:05:57 2021 ========= Last MCU build config ========= CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR is not set
CONFIG_MACH_ATSAM is not set
CONFIG_MACH_ATSAMD is not set
CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
CONFIG_MACH_RP2040 is not set
CONFIG_MACH_PRU is not set
CONFIG_MACH_LINUX is not set
CONFIG_MACH_SIMU is not set
CONFIG_STEP_DELAY=2 CONFIG_BOARD_DIRECTORY="stm32" CONFIG_MCU="stm32f103xe" CONFIG_CLOCK_FREQ=72000000 CONFIG_SERIAL=y CONFIG_FLASH_START=0x8007000 CONFIG_FLASH_SIZE=0x10000 CONFIG_RAM_START=0x20000000 CONFIG_RAM_SIZE=0x5000 CONFIG_STACK_SIZE=512 CONFIG_STM32_SELECT=y CONFIG_MACH_STM32F103=y
CONFIG_MACH_STM32F207 is not set
CONFIG_MACH_STM32F401 is not set
CONFIG_MACH_STM32F405 is not set
CONFIG_MACH_STM32F407 is not set
CONFIG_MACH_STM32F429 is not set
CONFIG_MACH_STM32F446 is not set
CONFIG_MACH_STM32F031 is not set
CONFIG_MACH_STM32F042 is not set
CONFIG_MACH_STM32F070 is not set
CONFIG_MACH_STM32F072 is not set
CONFIG_MACH_STM32H750 is not set
CONFIG_MACH_STM32F1=y CONFIG_HAVE_STM32_USBFS=y CONFIG_HAVE_STM32_CANBUS=y
CONFIG_STM32_FLASH_START_2000 is not set
CONFIG_STM32_FLASH_START_5000 is not set
CONFIG_STM32_FLASH_START_7000=y
CONFIG_STM32_FLASH_START_8000 is not set
CONFIG_STM32_FLASH_START_8800 is not set
CONFIG_STM32_FLASH_START_10000 is not set
CONFIG_STM32_FLASH_START_800 is not set
CONFIG_STM32_FLASH_START_4000 is not set
CONFIG_STM32_FLASH_START_0000 is not set
CONFIG_STM32_CLOCK_REF_8M=y
CONFIG_STM32_CLOCK_REF_12M is not set
CONFIG_STM32_CLOCK_REF_16M is not set
CONFIG_STM32_CLOCK_REF_25M is not set
CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=8000000 CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12 is not set
CONFIG_STM32_SERIAL_USART1 is not set
CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
CONFIG_STM32_SERIAL_USART2 is not set
CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
CONFIG_STM32_SERIAL_USART3=y
CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
CONFIG_STM32_CANBUS_PA11_PA12 is not set
CONFIG_STM32_CANBUS_PB8_PB9 is not set
CONFIG_CANBUS_FREQUENCY=500000 CONFIG_SERIAL_BAUD=250000 CONFIG_USB_VENDOR_ID=0x1d50 CONFIG_USB_DEVICE_ID=0x614e CONFIG_USB_SERIAL_NUMBER_CHIPID=y CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CUSTOM_STEP_DELAY is not set
CONFIG_INITIAL_PINS="" CONFIG_HAVE_GPIO=y CONFIG_HAVE_GPIO_ADC=y CONFIG_HAVE_GPIO_SPI=y CONFIG_HAVE_GPIO_I2C=y CONFIG_HAVE_GPIO_HARD_PWM=y CONFIG_HAVE_GPIO_BITBANGING=y CONFIG_HAVE_STRICT_TIMING=y CONFIG_HAVE_CHIPID=y CONFIG_INLINE_STEPPER_HACK=y
Build file /home/pi/klipper/klippy/../out/klipper.dict(6811): Mon Oct 18 22:06:37 2021 Last MCU build version: v0.10.0-66-g5c10001b Last MCU build tools: gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1 Last MCU build config: BUS_PINS_i2c1=PB6,PB7 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 STEP_DELAY=2 SERIAL_BAUD=250000 ADC_MAX=4095 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 PWM_MAX=255 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 CLOCK_FREQ=72000000 Build file /home/pi/klipper/klippy/../out/klipper.elf(251392): Mon Oct 18 22:06:45 2021 Unable to issue reset command on MCU 'mcu' webhooks client 1968802072: Disconnected Restarting printer Start printer at Tue Oct 19 16:06:47 2021 (1634656007.6 341.3) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1970709688: New connection webhooks client 1970709688: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} webhooks client 1970709688: Disconnected Restarting printer Start printer at Tue Oct 19 16:10:47 2021 (1634656247.7 581.3) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1968876600: New connection webhooks client 1968876600: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} webhooks client 1968876600: Disconnected Restarting printer Start printer at Tue Oct 19 16:11:39 2021 (1634656299.4 633.1) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1968995784: New connection webhooks client 1968995784: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1968995784: Disconnected Restarting printer Start printer at Tue Oct 19 16:11:43 2021 (1634656303.1 636.8) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1968986352: New connection webhooks client 1968986352: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1968986352: Disconnected Restarting printer Start printer at Tue Oct 19 16:18:33 2021 (1634656713.4 1047.1) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1971449408: New connection webhooks client 1971449408: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} webhooks client 1971449408: Disconnected Restarting printer Start printer at Tue Oct 19 16:38:48 2021 (1634657929.0 2262.6) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1969006912: New connection webhooks client 1969006912: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1969006912: Disconnected Restarting printer Start printer at Tue Oct 19 16:42:29 2021 (1634658149.8 2483.4) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 position_endstop = 0.0 endstop_pin = ^PA7 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [safe_z_home] home_xy_position: 150.7, 137 speed: 100 z_hop: 10 z_hop_speed: 5 [bltouch] sensor_pin: ^PB1 control_pin: PB0 x_offset: -20.7 y_offset: -7 z_offset: 2.4 speed: 3.0 [bed_mesh] speed: 100 mesh_min: 10, 10 mesh_max: 239, 239 algorithm: bicubic probe_count: 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 349, in add_extra_stepper pin_params = ppins.parse_pin(endstop_pin, True, True) File "/home/pi/klipper/klippy/pins.py", line 225, in parse_pin raise error("Unknown pin chip name '%s'" % (chip_name,)) error: Unknown pin chip name 'PA7 endstop_pin' webhooks client 1971449728: New connection webhooks client 1971449728: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1971449728: Disconnected Restarting printer Start printer at Tue Oct 19 16:45:06 2021 (1634658306.7 2640.4) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 position_endstop = 0.0 endstop_pin = ^PA7 position_max = 400
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Extruder max_extrude_ratio=0.266081 mcu 'mcu': Starting serial connect mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' webhooks client 1968282240: New connection webhooks client 1968282240: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' Unable to issue reset command on MCU 'mcu' webhooks client 1968282240: Disconnected Restarting printer Start printer at Tue Oct 19 16:46:15 2021 (1634658375.9 2709.5) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 position_max = 400 [bltouch] sensor_pin: ^PB1 control_pin: PB0
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 346, in add_extra_stepper endstop_pin = config.get('endstop_pin') File "/home/pi/klipper/klippy/configfile.py", line 58, in get note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 33, in _get_wrapper % (option, self.section)) Error: Option 'endstop_pin' in section 'stepper_z' must be specified webhooks client 1969221384: New connection webhooks client 1969221384: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1969221384: Disconnected Restarting printer Start printer at Tue Oct 19 16:47:12 2021 (1634658432.8 2766.5) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin: probe:z_virtual_endstop position_min: -5 position_max = 400 [bltouch] sensor_pin: ^PB1 control_pin: PB0 z_offset: 2.4
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Config error Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 157, in _connect self._read_config() File "/home/pi/klipper/klippy/klippy.py", line 143, in _read_config m.add_printer_objects(config) File "/home/pi/klipper/klippy/toolhead.py", line 600, in add_printer_objects config.get_printer().add_object('toolhead', ToolHead(config)) File "/home/pi/klipper/klippy/toolhead.py", line 256, in init self.kin = mod.load_kinematics(self, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 100, in load_kinematics return CoreXYKinematics(toolhead, config) File "/home/pi/klipper/klippy/kinematics/corexy.py", line 14, in init stepper.LookupMultiRail(config.getsection('stepper_z')) ] File "/home/pi/klipper/klippy/stepper.py", line 388, in LookupMultiRail rail = PrinterRail(config) File "/home/pi/klipper/klippy/stepper.py", line 270, in init self.add_extra_stepper(config) File "/home/pi/klipper/klippy/stepper.py", line 340, in add_extra_stepper stepper = PrinterStepper(config, self.stepper_units_in_radians) File "/home/pi/klipper/klippy/stepper.py", line 207, in PrinterStepper step_dist = parse_step_distance(config, units_in_radians, True) File "/home/pi/klipper/klippy/stepper.py", line 244, in parse_step_distance note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 67, in getfloat note_valid=note_valid) File "/home/pi/klipper/klippy/configfile.py", line 40, in _get_wrapper % (option, self.section)) Error: Unable to parse option 'rotation_distance' in section 'stepper_z' webhooks client 1969848408: New connection webhooks client 1969848408: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} Unable to issue reset command on MCU 'mcu' webhooks client 1969848408: Disconnected Restarting printer Start printer at Tue Oct 19 16:48:53 2021 (1634658533.7 2867.4) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin = probe:z_virtual_endstop position_min = -5 position_max = 400
[safe_z_home] home_xy_position = 150.7, 137 speed = 100 z_hop = 10 z_hop_speed = 5
[bltouch] sensor_pin = ^PB1 control_pin = PB0 x_offset = -20.7 y_offset = -7 z_offset = 2.4 speed = 3.0
[bed_mesh] speed = 100 mesh_min = 10, 10 mesh_max = 239, 239 algorithm = bicubic probe_count = 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Extruder max_extrude_ratio=0.266081 mcu 'mcu': Starting serial connect mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' webhooks client 1968388136: New connection webhooks client 1968388136: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' MCU error during connect Traceback (most recent call last): File "/home/pi/klipper/klippy/klippy.py", line 158, in _connect self.send_event("klippy:mcu_identify") File "/home/pi/klipper/klippy/klippy.py", line 248, in send_event return [cb(*params) for cb in self.event_handlers.get(event, [])] File "/home/pi/klipper/klippy/mcu.py", line 769, in _mcu_identify raise error(str(e)) error: mcu 'mcu': Unable to connect Build file /home/pi/klipper/klippy/../.config(2523): Mon Oct 18 22:05:57 2021 ========= Last MCU build config ========= CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR is not set
CONFIG_MACH_ATSAM is not set
CONFIG_MACH_ATSAMD is not set
CONFIG_MACH_LPC176X is not set
CONFIG_MACH_STM32=y
CONFIG_MACH_RP2040 is not set
CONFIG_MACH_PRU is not set
CONFIG_MACH_LINUX is not set
CONFIG_MACH_SIMU is not set
CONFIG_STEP_DELAY=2 CONFIG_BOARD_DIRECTORY="stm32" CONFIG_MCU="stm32f103xe" CONFIG_CLOCK_FREQ=72000000 CONFIG_SERIAL=y CONFIG_FLASH_START=0x8007000 CONFIG_FLASH_SIZE=0x10000 CONFIG_RAM_START=0x20000000 CONFIG_RAM_SIZE=0x5000 CONFIG_STACK_SIZE=512 CONFIG_STM32_SELECT=y CONFIG_MACH_STM32F103=y
CONFIG_MACH_STM32F207 is not set
CONFIG_MACH_STM32F401 is not set
CONFIG_MACH_STM32F405 is not set
CONFIG_MACH_STM32F407 is not set
CONFIG_MACH_STM32F429 is not set
CONFIG_MACH_STM32F446 is not set
CONFIG_MACH_STM32F031 is not set
CONFIG_MACH_STM32F042 is not set
CONFIG_MACH_STM32F070 is not set
CONFIG_MACH_STM32F072 is not set
CONFIG_MACH_STM32H750 is not set
CONFIG_MACH_STM32F1=y CONFIG_HAVE_STM32_USBFS=y CONFIG_HAVE_STM32_CANBUS=y
CONFIG_STM32_FLASH_START_2000 is not set
CONFIG_STM32_FLASH_START_5000 is not set
CONFIG_STM32_FLASH_START_7000=y
CONFIG_STM32_FLASH_START_8000 is not set
CONFIG_STM32_FLASH_START_8800 is not set
CONFIG_STM32_FLASH_START_10000 is not set
CONFIG_STM32_FLASH_START_800 is not set
CONFIG_STM32_FLASH_START_4000 is not set
CONFIG_STM32_FLASH_START_0000 is not set
CONFIG_STM32_CLOCK_REF_8M=y
CONFIG_STM32_CLOCK_REF_12M is not set
CONFIG_STM32_CLOCK_REF_16M is not set
CONFIG_STM32_CLOCK_REF_25M is not set
CONFIG_STM32_CLOCK_REF_INTERNAL is not set
CONFIG_CLOCK_REF_FREQ=8000000 CONFIG_STM32F0_TRIM=16
CONFIG_STM32_USB_PA11_PA12 is not set
CONFIG_STM32_SERIAL_USART1 is not set
CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6 is not set
CONFIG_STM32_SERIAL_USART2 is not set
CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5 is not set
CONFIG_STM32_SERIAL_USART3=y
CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8 is not set
CONFIG_STM32_CANBUS_PA11_PA12 is not set
CONFIG_STM32_CANBUS_PB8_PB9 is not set
CONFIG_CANBUS_FREQUENCY=500000 CONFIG_SERIAL_BAUD=250000 CONFIG_USB_VENDOR_ID=0x1d50 CONFIG_USB_DEVICE_ID=0x614e CONFIG_USB_SERIAL_NUMBER_CHIPID=y CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CUSTOM_STEP_DELAY is not set
CONFIG_INITIAL_PINS="" CONFIG_HAVE_GPIO=y CONFIG_HAVE_GPIO_ADC=y CONFIG_HAVE_GPIO_SPI=y CONFIG_HAVE_GPIO_I2C=y CONFIG_HAVE_GPIO_HARD_PWM=y CONFIG_HAVE_GPIO_BITBANGING=y CONFIG_HAVE_STRICT_TIMING=y CONFIG_HAVE_CHIPID=y CONFIG_INLINE_STEPPER_HACK=y
Build file /home/pi/klipper/klippy/../out/klipper.dict(6811): Mon Oct 18 22:06:37 2021 Last MCU build version: v0.10.0-66-g5c10001b Last MCU build tools: gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1 Last MCU build config: BUS_PINS_i2c1=PB6,PB7 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c1a=PB8,PB9 STEP_DELAY=2 SERIAL_BAUD=250000 ADC_MAX=4095 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 PWM_MAX=255 MCU=stm32f103xe STATS_SUMSQ_BASE=256 BUS_PINS_spi1a=PB4,PB5,PB3 CLOCK_FREQ=72000000 Build file /home/pi/klipper/klippy/../out/klipper.elf(251392): Mon Oct 18 22:06:45 2021 webhooks client 1968388136: Disconnected Restarting printer Start printer at Tue Oct 19 17:01:00 2021 (1634659260.5 3594.2) ===== Config file ===== [virtual_sdcard] path = ~/gcode_files
[display_status]
[pause_resume]
[gcode_macro PAUSE] description = Cancel the actual running print rename_existing = CANCEL_PRINT_BASE variable_extrude = 1.0 gcode = TURN_OFF_HEATERS CANCEL_PRINT_BASE
[stepper_x] step_pin = PB8 dir_pin = PB7 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA5 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_y] step_pin = PC2 dir_pin = !PB9 enable_pin = !PC3 microsteps = 16 rotation_distance = 40 endstop_pin = ^PA6 position_endstop = 260 position_max = 260 homing_speed = 50
[stepper_z] step_pin = PB6 dir_pin = PB5 enable_pin = !PC3 microsteps = 16 rotation_distance = 8 endstop_pin = probe:z_virtual_endstop position_min = -5 position_max = 400
[safe_z_home] home_xy_position = 150.7, 137 speed = 100 z_hop = 10 z_hop_speed = 5
[bltouch] sensor_pin = ^PB1 control_pin = PB0 x_offset = -20.7 y_offset = -7 z_offset = 2.4 speed = 3.0
[bed_mesh] speed = 100 mesh_min = 10, 10 mesh_max = 239, 239 algorithm = bicubic probe_count = 5,5
[extruder] max_extrude_only_distance = 1000.0 step_pin = PB4 dir_pin = !PB3 enable_pin = !PC3 microsteps = 16 rotation_distance = 22.857 nozzle_diameter = 0.400 filament_diameter = 1.750 heater_pin = PA1 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC5 control = pid pid_kp = 26.949 pid_ki = 1.497 pid_kd = 121.269 min_temp = 0 max_temp = 260
[heater_bed] heater_pin = PA2 sensor_type = EPCOS 100K B57560G104F sensor_pin = PC4 control = pid pid_kp = 327.11 pid_ki = 19.20 pid_kd = 1393.45 min_temp = 0 max_temp = 100
[fan] pin = PA0
[filament_switch_sensor e0_sensor] switch_pin = PA4
[mcu] serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 restart_method = command
[printer] kinematics = corexy max_velocity = 500 max_accel = 2000 max_z_velocity = 10 max_z_accel = 100
Extruder max_extrude_ratio=0.266081 mcu 'mcu': Starting serial connect mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0' webhooks client 1968404520: New connection webhooks client 1968404520: Client info {'program': 'Moonraker', 'version': 'v0.7.1-76-g6a6422c'} mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0'