Closed c11umw closed 1 year ago
Resolved. You have to hold the pairing button on the devices for a really long time.
After 5-6s it flashes.. ignore that and keep holding. 10-12s and it double flashes... ignore that too. After about 20s it goes solid red. Release the pairing button and off it goes
Hi Today I migrated over from a ConbeeII to Sonoff 3.0 Dongle Plus-P ZNP = Texas Instruments Z-Stack ZNP protocol: CC253x, CC26x2, CC13x2 by ZHA
Before doing so I updated the firmware of the Sonoff with CC1352P2_CC2652P_launchpad_coordinator_20221226 Flashing tool: Texas Instruments: Flash Programmer 2
Once done the migration went well and I re-paired all my devices with the exception of our Frient ones. 2 Smart Energy plugs (SPLZB-134) 1 Smart Electricity Meter (ZHEMI101)
They worked for a long time with the ConbeeII, but I'm unable to get them to pair with the Sonoff coordinator
RaspberryPi 4 install (SSD) Home Assistant 2023.3.6 Supervisor 2023.03.2 Operating System 9.5 Frontend 20230309.1 - latest USB extension used to move the dongle far from the SSD/Pi
Dongle HW info from HomeAssistant:
/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0