Installed Firmware from 20230507 and Coordinator is not working

[rionshin]

Hello,

i downloaded and installed 20230507 using: sudo python3 cc2538-bsl.py -ewv -p /dev/ttyUSB0 --bootloader-sonoff-usb ./CC1352P2_CC2652P_launchpad_coordinator_20230507.hex However my Coordinator was on ttyACM0 for some reason command run and update the firmware, however after that coordinator was moved to USB0, Zigbee2MQQT didn't started as it was configured to be on ACM0. i try to revert the firmware and i am getting error:

pi@homebridge:~/cc2538-bsl $ sudo python3 cc2538-bsl.py -ewv -p /dev/ttyUSB0 --bootloader-sonoff-usb ./CC1352P2_CC2652P_launchpad_coordinator_20221226.hex sonoff Opening port /dev/ttyUSB0, baud 500000 Reading data from ./CC1352P2_CC2652P_launchpad_coordinator_20221226.hex Your firmware looks like an Intel Hex file Connecting to target... ERROR: device reports readiness to read but returned no data (device disconnected or multiple access on port?)

could you please let me know how i can fix this, as my home is down :(

Also i don't get any output : pi@homebridge:~/cc2538-bsl $ sudo ls /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directory

When i try to update with September firmware pi@homebridge:~/cc2538-bsl $ sudo python3 cc2538-bsl.py -ewv -p /dev/ttyUSB0 --bootloader-sonoff-usb ./CC1352P2_CC2652P_launchpad_coordinator_20230902.hex sonoff Opening port /dev/ttyUSB0, baud 500000 Reading data from ./CC1352P2_CC2652P_launchpad_coordinator_20230902.hex Your firmware looks like an Intel Hex file Connecting to target... ERROR: Timeout waiting for ACK/NACK after 'Synch (0x55 0x55)'

[rionshin]

I open the coordinator and push it to BSL manually via the button, and then i was able to revert back to 20221226 version

[Koenkk]

Try 202309* and provide feedback here: https://github.com/Koenkk/Z-Stack-firmware/discussions/478