Fixed attribute reporting not working after power cycle; binding table is now persisted.
Attribute 0x000 CurrentSummationDelivered of the Metering cluster 0x0702 was reported as not reporting, but our testing showed the attribute is reported if requested: interested devices (such as a bridge) must create a binding to cluster 0x0702 and send command ConfigureAttributeReporting for the attribute. The binding is now also persisted so it keeps working after a power cycle.
Added possibility to disable overload protection: Keep button pressed between 15 and 20 seconds, then release. After 5 seconds, the LED will start quick-blinking; keep the button pressed. After 10 seconds, blinking stops; keep the button pressed. After 15 seconds, the LED will start quick-blinking again. Now release the button. The LED will slow-blink 3 times to indicate success. Every on/off action will now double-blink the LED before assuming final state. Enable again in the same way. Enabled/disabled state is persisted over power -cycles, even if not connected to a bridge.
Release notes: