Closed majkers closed 2 years ago
Updated conbee 2 to 0x26720700 and still no change
Ik have the same problem with the _TZ3000_v1pdxuqq, switching works but no power measurements
Ah, so that's it. I have seen this too. Suddenly had a defrosted freezer :-)
I bought four of these devices, and two of them cause a power outage whenever I plug them in.. They're not great in my opinion. Maybe the device database could also have a rating or opinion system, or just some warnings from the community.
Conbee 2:
{"meta":{"maintrel":0,"majorrel":38,"minorrel":114,"product":0,"revision":"0x26720700","transportrev":0},"type":"ConBee2/RaspBee2"}
Zigbee2MQTT:
Zigbee2MQTT version 1.22.1 (commit #8999683)
zigbee-herdsman (0.13.176)
I believe I've seen a 'hasOwnProperty` error for these devices in the logs.
What happened?
I am using Home Assistant plugin version 1.22.2-1. In this version socket TS011F_plug_3 _TZ3000_gjnozsaz is supported but when I set power outage memory to restore or on it is not working. Every time after power outage, socket sets its state to off.
I have the same problem with these sockets.
Same problem with deconz and zha. Seems that there is firmware update that fixes problem with setting after power loss and also meter report instead of polling https://forum.phoscon.de/t/new-tuya-smart-plug-nas-wr01b-or-tz3000-w0qqde0g/819
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days
Same problem here, with this socket.
FIXED it by pairing it with a TUYA-compatible hub and updating the firmware to the current one, then re-pairing back to z2m.
hi, i know this thread is old but i still have the problem that the power outage memory is not working. but only with a few of my plugs. some are working and i also had an defrosted feezer one day. can anyone confirm that the fix with an tuya compatible hub for the nous a1z works? where do i get the current firmware informations out of the plug? thanks in advance!
What happened?
I am using Home Assistant plugin version 1.22.2-1. In this version socket TS011F_plug_3 _TZ3000_gjnozsaz is supported but when I set power outage memory to restore or on it is not working. Every time after power outage, socket sets its state to off.
What did you expect to happen?
I excpected socket to set its state as in power_outage_memory setting
How to reproduce it (minimal and precise)
Zigbee2MQTT version
1.22.2-1
Adapter firmware version
0x26660700
Adapter
ConBee2/RaspBee2
Debug log
n/a