Closed PM04290 closed 2 years ago
@Koenkk I'm sorry to insist but I need to know if it's a possible Z2M problem or if the module is broken, in which case I have to have it replaced.
Does it also fail to pair when holding it very close to the coordinator?
@Koenkk i have tryed at 5cm of coordinator, there wae absloutely no line on debug log. A bought another scene switch : https://fr.aliexpress.com/item/1005002517960508.html same problem, no lines on debug log. can i do something with a sniffer usb dongle to help you ? ha ve you an idae why there no lines on debug log. th two parts are zibbee 3.0.
Do you maybe have an old cc2531 sniffer, if yes can you provide a sniff when trying to pair the device?
https://www.zigbee2mqtt.io/advanced/zigbee/04_sniff_zigbee_traffic.html#with-cc2531
@Koenkk , see attached file for 2 sniff, begin just after pairring authorized until led flashing end on devices. Sniff.zip
In Zigbee pairing is started by a device by sending a "Beacon request", I don't see that in your sniffs (should appear in the info column). This could mean 2 things:
@Koenkk , i try all channels, and there is no Beacon request.
i submit the problem to Aliexpress salor with this question
_Is this module full compatible ZigBee 3.0 ? what channel is Used ? With ZBoss sniffer (on Sonoff dongle), no packet appears when i make pairing (10 seconds press on button)
and this response is :
_the product cannot connect with Sonoff , pls connect tuya and Zigbee3.0_
No body have used scene button with Z2M ? i am the first one ? :-) the problem is the same on 2 differents models. (but actually with the same chip)
Do you see any solution to solve my problem ?
Do you see any solution to solve my problem ?
Try to pair this device to the original gateway
it's a way, but i don't want to buy a dedicated hub just for a device, so much for that. is it possible to use the Tuya zigbee hub like a sonoff dongle for Z2M ?
is it possible to use the Tuya zigbee hub like a sonoff dongle for Z2M ?
no
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days
What happened?
When pairing ZBWS01 (with dedicated button NET-KEY), led blinking normaly after few seconds, but nothing appear in Z2M, log is in debug mode and no lines displayed.
What did you expect to happen?
pairing normally :)
How to reproduce it (minimal and precise)
all times i use this model from Lonsonho https://zigbee.blakadder.com/Lerlink_ZBWS01.html 1 gang https://fr.aliexpress.com/item/1005002235870518.html
Zigbee2MQTT version
1.22.2-1
Adapter firmware version
20211217
Adapter
usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus
Debug log
nothing :(