Map takes forever to load, or doesn't load at all...

[pauloon]

What happened?

Map takes a looong time to load and most of the times does not finish loading at all.

I have only 43 devices. Using HASS with Z2M and a Sonoff Zig USB adapter. All updated.

Tryed many solutions, removed power reporting from most devices to "uncllog" the network but it does not appear to work much. Tried cleaning the USB contacts also.

Can you help?

Thanks Paulo.

What did you expect to happen?

The map to show up correctly and in a short time.

How to reproduce it (minimal and precise)

Start Z2M, go to the admin and request Map do load...

Zigbee2MQTT version

1.28.0 commit: unknown

Adapter firmware version

20220219

Adapter

SONOFF Zigbee 3.0

Debug log

log.txt

[github-actions[bot]]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[pauloon]

I know that this is not a priority, but I wouldn't like it to get lost....

[mathieu-mp]

Hi, same here ! zigbee2mqtt HA addon 1.28.2-1

[ghost]

Hi, I have the same.

info  2022-12-05 01:22:20: Logging to console and directory: '/app/data/log/2022-12-05.01-22-20' filename: log.txt
info  2022-12-05 01:22:20: Starting Zigbee2MQTT version 1.28.2 (commit #360a777)
info  2022-12-05 01:22:20: Starting zigbee-herdsman (0.14.68)

installed by docker-compose:

services:
  zigbee2mqtt:
    container_name: zigbee2mqtt
    image: koenkk/zigbee2mqtt                                                                                                                                                                                      

[github-actions[bot]]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[DenisBY]

I have the same issue

UPDATE: it just takes much longer than "2 minutes". Especially when you have "dead" devices.

[merlinpimpim]

I now have this problem with zigbee2mqtt 1.33.2 (it wasn't the case before) even when waiting overnight (and not only 2mn 😁 ). More precisely: I manage to load the map after a Z2M restart. It's even possible to launch several mappings in a row, but if you wait a while it's no longer possible to do a single one before restarting Z2M again.

[timmo65]

Hello, following this - mine has been fine for months - i'm on 1.35.1-1 using a sonoff dongle coordinator plugged into usb on a NUC running HA in proxmox. I'm now getting this behaviour and need to restart the zigbee2mqtt bridge every day as some devices become unresponsive and the map never loads (unless after a restart). I am starting to look at usb extension lengths to move it further away from interference but I don't really know if that is the issue or if its the coordinator, any of the devices or something else. Wifi is via Eero which I dont think I can change channels on. Would just like a steer on what I should really be concentrating on first. Thanks

[merlinpimpim]

If it's any help: when these problems occur, I've found that completely switching off (electrically) my system (Khadas + HA supervised + SkyConnect + Z2M), and not just rebooting it, means that it works for several days!

[timmo65]

If it's any help: when these problems occur, I've found that completely switching off (electrically) my system (Khadas + HA supervised + SkyConnect + Z2M), and not just rebooting it, means that it works for several days!

Thanks - I will try anything. I got a 2m usb2 extension (was 1m usb3) and also found a device (smart plug) not powered on at the wall switch in the network - so enabled that. Will see - thanks for the response. I notice a few new issues on here for things similar to this with problems with the zigbee2mqtt network.

[merlinpimpim]

Having said that, we have to accept that not everything works in a stable manner if we don't use an adapter from the "Recommended" section (which is my case with the SkyConnect): https://www.zigbee2mqtt.io/guide/adapters/ On the other hand, it would be nice if adapters that have been in the "Experimental" section for a long time could one day be managed without any problems (time flies...)! 😁 @Koenkk

[timmo65]

Hello, following this - mine has been fine for months - i'm on 1.35.1-1 using a sonoff dongle coordinator plugged into usb on a NUC running HA in proxmox. I'm now getting this behaviour and need to restart the zigbee2mqtt bridge every day as some devices become unresponsive and the map never loads (unless after a restart). I am starting to look at usb extension lengths to move it further away from interference but I don't really know if that is the issue or if its the coordinator, any of the devices or something else. Wifi is via Eero which I dont think I can change channels on. Would just like a steer on what I should really be concentrating on first. Thanks

An update on this but not 100% sure where the problem was as i have updated z2m a couple of times since this post and also replaced the Sonoff dongle E with a lan connected smlight slzb06 ( I got the M experimental version by mistake but it seems ok). I flashed the sonoff with router firmware and now use that in the network. Actually doing this was a lot easier than i thought it would be. The map loads quickly now and more reliably and I am not having to restart the addon as devices are now not going offline. I think it is fixed so likely was the usb attached dongle causing interference.

[merlinpimpim]

Personally, I think my issues stemmed from the Lixee device whose adventures are recounted here: https://github.com/Koenkk/zigbee2mqtt/issues/21198

[lperco]

I have the same issue

UPDATE: it just takes much longer than "2 minutes". Especially when you have "dead" devices.

same here. I've IKEA light that, some times, I manualy switch off, cut AC power, with traditional switch so it became "dead" and generates error on z2m and map doesen't load.

[dajomas]

It seems indeed that unreachable elements are the culprit here. I have a 7 unreachable elements and it took over half an hour to build the map (I have 86 elements, including the 7 unreachable ones)