Zigbee2mqtt Failed to configure thermostate

[l0ttek]

What happened?

I used a danfoss ally thermostate and all of them not working after a few days, not responding for any change. I tried to reconfigure device but got this error.

2023-01-12 21:48:04Failed to configure 'thermostate-bedroom', attempt 1 (Error: Bind 0x0c4314fffe5ddfc6/1 genPowerCfg from '0x00124b00228133fa/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Timeout._onTimeout (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:64:35) at listOnTimeout (node:internal/timers:559:17) at processTimers (node:internal/timers:502:7))

Previously when I restarted zigbee2mqtt or whole device everything back to normal for a while, but now not working anymore..

Software version 01.18.0008 01.18 Producer Danfoss Model 014G2461

What did you expect to happen?

I would like to change themperature on my thermostate.

How to reproduce it (minimal and precise)

Add device danfoss ally, try to change temperature after day or few days normal work.

Zigbee2MQTT version

1.29.1-1

Adapter firmware version

20220219

Adapter

CC2652P

Debug log

No response

[paszczaq]

Are you using any routers in your zigbee network? Take a look at zigbee map and see if your TRV is connected directly to cooridinator - if yes take a look here: #13478 Latest reports are showing that upgrade to firmware 20221226 on sonoff dongle plus helps

[l0ttek]

Yes, it is connected directly to my coordinator. Thanks, I will look at this and upgrade coordinator.

[l0ttek]

@paszczaq Hi, now start working, but changing temperature on this thermostate takes 3-4minutes, on others in two seconds..

[l0ttek]

@paszczaq everything back to normal after upgrade dongle software to dev version, thank you.

[l0ttek]

Back to normal after upgrade dongle software to 20221226 version

[Gerry33]

@l0ttek : Where did you find the firmware ''20221226 '.

I can only find a version ''20220219' at ' https://github.com/Koenkk/Z-Stack-firmware/tree/master/coordinator/Z-Stack_3.x.0/bin

Thanks Gerry

[paszczaq]

@Gerry33: just switch branch to develop

[Gerry33]

@paszczaq : Thank you very much for the hint. GITHUB is sometimes a maze ... or I'm too dull ...

May I also ask which one of the 2 firmwares for the CC1352P you flashed :

• CC1352P2_CC2652P_launchpad_coordinator_20221226.zip
• CC1352P2_CC2652P_other_coordinator_20221226.zip

.. and which tool did you use ?

I'm not familar with all this terminology. Again Thanks, Gerry

[l0ttek]

@paszczaq : Thank you very much for the hint. GITHUB is sometimes a maze ... or I'm too dull ...

May I also ask which one of the 2 firmwares for the CC1352P you flashed :

• CC1352P2_CC2652P_launchpad_coordinator_20221226.zip
• CC1352P2_CC2652P_other_coordinator_20221226.zip

.. and which tool did you use ?

I'm not familar with all this terminology. Again Thanks, Gerry

Hi Gerry, sorry for late response. You should look at the table at the bottom and find your dongle coordinator. The third column tells you which file to download.

I used this tutorial for upgrade software https://www.youtube.com/watch?v=4S_c_m6z-RY&ab_channel=digiblurDIY

and it works :) have fun and if you have any question, feel free to ask

[l0ttek]

@paszczaq the problem still occurs, but less frequently than before. After two weeks, my two thermostats are not responding to any changes..

[Gerry33]

@paszczaq : Thank you very much for your attention. With your hint I got the the stick updated with the latest firmware version.

But as @l0ttek already said above, the problem persists also in my configuration. Will try to re-pair, remove routers, a.s.o. Lets see.

[l0ttek]

@Gerry33 After re-pair everything back to normal for a while, week, two weeks..

[paszczaq]

@Gerry33 @l0ttek if possible make sure that your TRV connects via router (zigbee socket or bulb) - that should stabilise connection until Koenkk can solve this issue. The fun fact from other people reports is that Ally works fine on ZHA :)

[l0ttek]

@paszczaq Yes, each TRV are connected to router, as you can see on the image below.

https://postimg.cc/hXZvHkzD

[Gerry33]

Still no luck. Ensured connection via a lightbulb router. Will now try to fiddle around with devices firmware updates with no great hope.

The problem is discussed in details also here [https://github.com/Koenkk/zigbee2mqtt/issues/13478]. Maybe we head over there, to avoid duplication.

[github-actions[bot]]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days