Closed crispy78 closed 1 year ago
boozeman
commented
6 months ago When you say include and exclude, what you mean? I got my remote work when updating 1.1.24 > 2.4.5 just removing the device from Z2M (Force Remove) and then pairing it back (press pairing button 4 times a row within 5 seconds)
JohnBull-1975
commented
6 months ago When you say include and exclude, what you mean? I got my remote work when updating 1.1.24 > 2.4.5 just removing the device from Z2M (Force Remove) and then pairing it back (press pairing button 4 times a row within 5 seconds)
I have tested both excluding by pressing the pairing button - then it leaves the network. When I permint join it comes back. I have also tested to take out batteries, pressing delete in MQTT and selected force remote. When inserting batteries and hit permit join it comes back. Still no response at all when I hit any button and after delete-force exclude it says "offline" in flashing red.
boozeman
commented
6 months ago And you removed that external converter and restart Z2M also?
JohnBull-1975
commented
6 months ago And you removed that external converter and restart Z2M also?
external converter?
If I remove and re-insert batteries, last seen gets updated. But it still says offline and no response from buttons
boozeman
commented
6 months ago And you removed that external converter and restart Z2M also?
external converter?
If I remove and re-insert batteries, last seen gets updated. But it still says offline and no response from buttons
And you restarted Z2M also? If so, I am clueless here. :(
JohnBull-1975
commented
6 months ago Just tried this:
Stil "Offline" and no response
JohnBull-1975
commented
6 months ago Edit: Tried clearing the log Pairing button x4 - device left Device LED stable red light Permit Join All - device re-joined
Log: Warning 2024-05-05 21:17:22Device '0x287681fffeecf0d8' left the network Info 2024-05-05 21:17:59Zigbee: allowing new devices to join. Error 2024-05-05 21:17:59Received undefined command from '0' Info 2024-05-05 21:18:05Interview for '0x287681fffeecf0d8' started Info 2024-05-05 21:18:05Device '0x287681fffeecf0d8' joined Info 2024-05-05 21:18:05Starting interview of '0x287681fffeecf0d8' Info 2024-05-05 21:18:09Succesfully interviewed '0x287681fffeecf0d8' Info 2024-05-05 21:18:09Successfully interviewed '0x287681fffeecf0d8', device has successfully been paired Info 2024-05-05 21:18:09Device '0x287681fffeecf0d8' is supported, identified as: IKEA STYRBAR remote control (E2001/E2002) Info 2024-05-05 21:18:31Zigbee: disabling joining new devices. Error 2024-05-05 21:18:31Received undefined command from '0'
Read further up in this thread...some buttons looks to have started working after just leaving them for a day or two... I'll see if my works tomorrow - otherwise I try to take it to IKEA and see if they replace it...
JohnBull-1975
commented
6 months ago that other thread was ZHA...so not applicable...other than it looks to be problems there as well
JohnBull-1975
commented
6 months ago I had no trouble updating remote to latest firmware, but I regret doing that. After update 2.4.11 arrow buttons stopped sending event action in zigbee2mqtt. other two buttons worked just fine. After binding one ikea lightbulb to remote via Z2mqtt short press on arrows started working, but longer press is not registering in event action, (not triggering). When I press and hold any of the arrow keys its starts to dim lightbulb I just have bind.
My updated styrbar does not react on any button after update to 2.4.11 and excluded and re-joined to the network. Tried to bind it to a bulb according to your post above, but it fails to bind:
Error 2024-05-05 23:08:53Frame changeSourceRouteHandler parsing error: RangeError: Attempt to access memory outside buffer bounds at new NodeError (node:internal/errors:405:5) at boundsError (node:internal/buffer:86:11) at Buffer.readUInt16LE (node:internal/buffer:245:5) at Buffer.readUIntLE (node:internal/buffer:182:17) at Function.deserialize (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/types/basic.ts:19:67) at new EZSPFrameData (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:180:54) at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:154:23 at Array.every (
zoomtronicOR
commented
6 months ago I had no trouble updating remote to latest firmware, but I regret doing that. After update 2.4.11 arrow buttons stopped sending event action in zigbee2mqtt. other two buttons worked just fine. After binding one ikea lightbulb to remote via Z2mqtt short press on arrows started working, but longer press is not registering in event action, (not triggering). When I press and hold any of the arrow keys its starts to dim lightbulb I just have bind.
My updated styrbar does not react on any button after update to 2.4.11 and excluded and re-joined to the network. Tried to bind it to a bulb according to your post above, but it fails to bind:
Error 2024-05-05 23:08:53Frame changeSourceRouteHandler parsing error: RangeError: Attempt to access memory outside buffer bounds at new NodeError (node:internal/errors:405:5) at boundsError (node:internal/buffer:86:11) at Buffer.readUInt16LE (node:internal/buffer:245:5) at Buffer.readUIntLE (node:internal/buffer:182:17) at Function.deserialize (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/types/basic.ts:19:67) at new EZSPFrameData (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:180:54) at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:154:23 at Array.every () at Function.createFrame (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:148:15) at Ezsp.onFrameReceived (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:439:35) Error 2024-05-05 23:08:53Unparsed frame 0xc4. Skipped Error 2024-05-05 23:08:55Failed to bind cluster 'genOnOff' from 'Styrbar' to 'Leos Byrå' (Error: Bind 0x287681fffeecf0d8/1 genOnOff from '0x5cc7c1fffe9f59fe/1' failed ({"address":35917,"clusterId":32801,"sequence":216} after 10000ms)) Error 2024-05-05 23:08:55Failed to bind
Did You checked following checkboxes on bulbs? OnOff, genPollCtrl do that and try binding again
JohnBull-1975
commented
6 months ago I had no trouble updating remote to latest firmware, but I regret doing that. After update 2.4.11 arrow buttons stopped sending event action in zigbee2mqtt. other two buttons worked just fine. After binding one ikea lightbulb to remote via Z2mqtt short press on arrows started working, but longer press is not registering in event action, (not triggering). When I press and hold any of the arrow keys its starts to dim lightbulb I just have bind.
My updated styrbar does not react on any button after update to 2.4.11 and excluded and re-joined to the network. Tried to bind it to a bulb according to your post above, but it fails to bind: Error 2024-05-05 23:08:53Frame changeSourceRouteHandler parsing error: RangeError: Attempt to access memory outside buffer bounds at new NodeError (node:internal/errors:405:5) at boundsError (node:internal/buffer:86:11) at Buffer.readUInt16LE (node:internal/buffer:245:5) at Buffer.readUIntLE (node:internal/buffer:182:17) at Function.deserialize (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/types/basic.ts:19:67) at new EZSPFrameData (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:180:54) at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:154:23 at Array.every () at Function.createFrame (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:148:15) at Ezsp.onFrameReceived (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:439:35) Error 2024-05-05 23:08:53Unparsed frame 0xc4. Skipped Error 2024-05-05 23:08:55Failed to bind cluster 'genOnOff' from 'Styrbar' to 'Leos Byrå' (Error: Bind 0x287681fffeecf0d8/1 genOnOff from '0x5cc7c1fffe9f59fe/1' failed ({"address":35917,"clusterId":32801,"sequence":216} after 10000ms)) Error 2024-05-05 23:08:55Failed to bind
Did You checked following checkboxes on bulbs? OnOff, genPollCtrl do that and try binding again
I tried checking OnOff, but there were not genPollCtrl for that bulb:
Tried checking OnOff and LevelCtrl just to test. Not sure what LevelCtrl is, but then it managed to bind LevelCtrl but not OnOff:
Logs:
Error 2024-05-05 23:50:51Frame changeSourceRouteHandler parsing error: RangeError: Attempt to access memory outside buffer bounds at new NodeError (node:internal/errors:405:5) at boundsError (node:internal/buffer:86:11) at Buffer.readUInt16LE (node:internal/buffer:245:5) at Buffer.readUIntLE (node:internal/buffer:182:17) at Function.deserialize (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/types/basic.ts:19:67) at new EZSPFrameData (/app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:180:54) at /app/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/ezsp.ts:154:23 at Array.every (
Edit: LevelCtrl lets me dim the lamp!!! Tried again to bind OnOff and now that worked. Can switch it on/off But still no response from buttons i MQTT console
JohnBull-1975
commented
6 months ago For the STYRBAR on 1.0.024, genPollCtrl and PowerCfg is bound to coordinator, but for the one on 2.4.11 it's only bound to genPollCtrl....and I can't get it to bind to PowerCfg
When it's possible to bind both functions for up down to go directly via coordinator, but Zigbee2MQTT does not react at all for those buttons....is there something incompatible with this new firmware...?
I don't think I will wait for to long...think I'll try to take the stuff to IKEA and see if they exchange it. It's just half a year old They use to have a very customer friendly approach...
bchevreau
commented
6 months ago If you are having issues with the color temperature controls on this remote, do the following:
This answer should be added to Styrbar remotes in zigbee2mqtt documentation as well imo, as it just worked for me FINALLY !!!
1- Create a group called ikea_lights (or any name) with ID 65289 (the ID is important) 2- Add lights AND remote to this "magic" group 65289 3- Go to remote and bind the light including feature/cluster 'Scenes' (my binds are LevelCtrl, OnOff, PowerCfg, Scenes) 4- Add the scenes to the bulb/group via MQTT json in your Home Assistant by clicking on MQTT>Configure with those options:
Topic: zigbee2mqtt/ikea_lights/set Payload: (add each line one by one before you publish for safety)
{"scene_add":{"ID":1,"name":"Cold temp","transition":1,"color_temp":250}} {"scene_add":{"ID":2,"name":"Neutral temp","transition":1,"color_temp":370}} {"scene_add":{"ID":3,"name":"Warm temp","transition":1,"color_temp":454}}
Then you should be able to switch through the scenes via the 'left/right click' on the remote !!!
GermanDZ
commented
6 months ago My control doesn't report arrow_right_hold, arrow_right_release, arrow_left_hold, arrow_left_release anymore. But that was happening even before the firmware upgrade (but after upgrading zigbee2mqtt in the recent days).
JohnBull-1975
commented
6 months ago My control doesn't report
arrow_right_hold,arrow_right_release,arrow_left_hold,arrow_left_releaseanymore. But that was happening even before the firmware upgrade (but after upgrading zigbee2mqtt in the recent days).
I planned taking my STYRBAR back to IKEA this afternoon and see if they accept to swap it under warranty as it stopped working...they use to have a very friendly customer service, but than that might not help. I don't think I tested it after updating Z2MQTT the other day before I updated the firmware of the STYRBAR.
I really hope some skilled enthusiast here can manage to update some driver so we can get our STYRBARs to work again!!!
bchevreau
commented
6 months ago For the STYRBAR on 1.0.024, genPollCtrl and PowerCfg is bound to coordinator, but for the one on 2.4.11 it's only bound to genPollCtrl....and I can't get it to bind to PowerCfg
When it's possible to bind both functions for up down to go directly via coordinator, but Zigbee2MQTT does not react at all for those buttons....is there something incompatible with this new firmware...?
I don't think I will wait for to long...think I'll try to take the stuff to IKEA and see if they exchange it. It's just half a year old They use to have a very customer friendly approach...
Have you tried to upgrade to 2.4.5 then to 2.4.11 though ? I was in the same boat, then I went thru the update process described above (for 2.4.5) then updated thru regular OTA.
Since then, only the 2 arrows were not working same as you, for which I described the fix above (right and left arrow are color temperature controls):
If you are having issues with the color temperature controls on this remote, do the following:
This answer should be added to Styrbar remotes in zigbee2mqtt documentation as well imo, as it just worked for me FINALLY !!!
1- Create a group called ikea_lights (or any name) with ID 65289 (the ID is important) 2- Add lights AND remote to this "magic" group 65289 3- Go to remote and bind the light including feature/cluster 'Scenes' (my binds are LevelCtrl, OnOff, PowerCfg, Scenes) 4- Add the scenes to the bulb/group via MQTT json in your Home Assistant by clicking on MQTT>Configure with those options:
Topic: zigbee2mqtt/ikea_lights/set Payload: (add each line one by one before you publish for safety)
{"scene_add":{"ID":1,"name":"Cold temp","transition":1,"color_temp":250}} {"scene_add":{"ID":2,"name":"Neutral temp","transition":1,"color_temp":370}} {"scene_add":{"ID":3,"name":"Warm temp","transition":1,"color_temp":454}}
Then you should be able to switch through the scenes via the 'left/right click' on the remote !!!
JohnBull-1975
commented
6 months ago For the STYRBAR on 1.0.024, genPollCtrl and PowerCfg is bound to coordinator, but for the one on 2.4.11 it's only bound to genPollCtrl....and I can't get it to bind to PowerCfg When it's possible to bind both functions for up down to go directly via coordinator, but Zigbee2MQTT does not react at all for those buttons....is there something incompatible with this new firmware...? I don't think I will wait for to long...think I'll try to take the stuff to IKEA and see if they exchange it. It's just half a year old They use to have a very customer friendly approach...
Have you tried to upgrade to 2.4.5 then to 2.4.11 though ? I was in the same boat, then I went thru the update process described above (for 2.4.5) then updated thru regular OTA.
Since then, only the 2 arrows were not working same as you, for which I described the fix above (right and left arrow are color temperature controls):
If you are having issues with the color temperature controls on this remote, do the following: This answer should be added to Styrbar remotes in zigbee2mqtt documentation as well imo, as it just worked for me FINALLY !!! 1- Create a group called ikea_lights (or any name) with ID 65289 (the ID is important) 2- Add lights AND remote to this "magic" group 65289 3- Go to remote and bind the light including feature/cluster 'Scenes' (my binds are LevelCtrl, OnOff, PowerCfg, Scenes) 4- Add the scenes to the bulb/group via MQTT json in your Home Assistant by clicking on MQTT>Configure with those options: Topic: zigbee2mqtt/ikea_lights/set Payload: (add each line one by one before you publish for safety) {"scene_add":{"ID":1,"name":"Cold temp","transition":1,"color_temp":250}} {"scene_add":{"ID":2,"name":"Neutral temp","transition":1,"color_temp":370}} {"scene_add":{"ID":3,"name":"Warm temp","transition":1,"color_temp":454}} Then you should be able to switch through the scenes via the 'left/right click' on the remote !!!
I updated directly to 2.4.11, so I can't try via 2.4.5 I want left/right to be read by the Z2MQTT controller as I don't use the standard IKEA colors/functions for left/right
macaholman
commented
6 months ago My control doesn't report
arrow_right_hold,arrow_right_release,arrow_left_hold,arrow_left_releaseanymore. But that was happening even before the firmware upgrade (but after upgrading zigbee2mqtt in the recent days).
I have exactly the same issue with version 2.4.11 as well as 2.4.5.. updated zigbee2mqtt recently, might be an issue with zigbee2mqtt. All other buttons work as expected!
0wnjei
commented
6 months ago I can confirm that after updating firmware to 2.4.11 both left/right long press don't work anymore. Any fixes for this (since I use both long presses for different lights toggling)?
Hammerhand17
commented
6 months ago I can confirm that after updating firmware to 2.4.11 both left/right long press don't work anymore. Any fixes for this (since I use both long presses for different lights toggling)?
For me, waiting a couple of days made them working again.
bmk64
commented
6 months ago https://community.home-assistant.io/t/ikea-styrbar-e2001-2002-ultimate-zigbee2mqtt-z2m/625090 This one works for left and right on/off
Danteba
commented
6 months ago In my case, the problem was resolved after upgrade zigbee2mqtt to the 1.37.1 version AND Home assistant to the 2024.5.2 version
Oggy123
commented
6 months ago for me helped to reconfigure device (the orange icon with arrows)
dieewossmarthome
commented
6 months ago I had the same problem, removing the noise once and retraining solved the problem.
dlbogdan
commented
6 months ago If you are having issues with the color temperature controls on this remote, do the following:
This answer should be added to Styrbar remotes in zigbee2mqtt documentation as well imo, as it just worked for me FINALLY !!!
1- Create a group called ikea_lights (or any name) with ID 65289 (the ID is important) 2- Add lights AND remote to this "magic" group 65289 3- Go to remote and bind the light including feature/cluster 'Scenes' (my binds are LevelCtrl, OnOff, PowerCfg, Scenes) 4- Add the scenes to the bulb/group via MQTT json in your Home Assistant by clicking on MQTT>Configure with those options:
Topic: zigbee2mqtt/ikea_lights/set Payload: (add each line one by one before you publish for safety)
{"scene_add":{"ID":1,"name":"Cold temp","transition":1,"color_temp":250}} {"scene_add":{"ID":2,"name":"Neutral temp","transition":1,"color_temp":370}} {"scene_add":{"ID":3,"name":"Warm temp","transition":1,"color_temp":454}}
Then you should be able to switch through the scenes via the 'left/right click' on the remote !!!
Any way of achieving this with ZHA? Also, I'm stuck on 2.4.5, can't update for the life of me.
steppel
commented
6 months ago I can confirm that after updating firmware to 2.4.11 both left/right long press don't work anymore. Any fixes for this (since I use both long presses for different lights toggling)?
Same problem, left and right buttons stopped working after firmware update. When you remove the battery and add it back, they start working again until it happens again. So the only way for now is reset via battery.
devWaves
commented
5 months ago I have a working fix that worked for me. I have 5 IKEA buttons. After the update 1 worked, the other 4 didn't report button presses anymore. I noticed the one that worked had different bind settings
Steps:
1) Add IKEA Styrbar button to Z2MQTT
2) Take the batteries out of the IKEA Styrbar Button
3) Open the Styrbar device "Bind" tab in Z2MQTT
4) Click all checkboxes under clusters so it looks like this ...
5) Put the batteries back in the IKEA Button
6) Press the "Actions" Bind button
you should now get a bunch of popups for each bind that was successful.
To get the battery to work again, it is possible it fixes itself, but you can also force the reporting by doing a similar process
Steps:
1) Take the batteries out of the IKEA Styrbar Button
3) Go to "Reporting" tab on the device in Z2MQTT and fill out for a new entry like this...
4) Put the batteries back in the IKEA Button
5) Press the "Actions" Apply button
The endpoint should create and save. Now you should be 100% working
yarafie
commented
5 months ago So I followed all suggestions and managed to update to 2.4.5 then even update to 2.4.11. But button (Any of them) Don't seem to work and I don;t see anything in the logs either (Turned on full debug)
I followed @devWaves instructions above also no luck, I did notice one difference though. Destination endpoint for me is 0 rather than 1.
devWaves
commented
5 months ago So I followed all suggestions and managed to update to 2.4.5 then even update to 2.4.11. But button (Any of them) Don't seem to work and I don;t see anything in the logs either (Turned on full debug)
I followed @devWaves instructions above also no luck, I did notice one difference though. Destination endpoint for me is 0 rather than 1.
@yarafie you can create a new binding. Use source endpoint = 1 , destination endpoint = 1, and destination = coordinator. Try creating a new one, then do the same bind process (take batteries out, fill out bind settings, put batteries back, press bind)
if that works then do an unbind on the original messed up one. or try unbind first
yarafie
commented
5 months ago I had 2 spare STYRBAR not updated yet so used those for the time being will get back to the other ones, one at 2.4.5 and the other at 2.4.11 and will post my trials here later when I get the chance.
I'm using a SLZB-06 as a coordinator and am at z2m 1.37.1
tux-
commented
5 months ago I updated to 2.4.11, and then discovered the device is not working properly anymore (no left / right click). So, I ended up here in hope of how I can restore 1.0.024. But, can not find the answer here, and ticket is already closed. Am I missing something?
wizsilex
commented
4 months ago I got 6 [E2001/E2002] 5 with 2.4.11, 2 of them are not working as they should, and 3 are working fine. 1 was not able to update OTA, but acts like the other 2 that are not working as they should
when pressing up on the 3 that are not working, then sends brightness_move_up command with no stop command I'm using SLZB-06M core firmware v2.3.6 and zigbee firmware revision: 20240510
Jansi187
commented
3 months ago I have a working fix that worked for me. I have 5 IKEA buttons. After the update 1 worked, the other 4 didn't report button presses anymore. I noticed the one that worked had different bind settings
Steps:
- Add IKEA Styrbar button to Z2MQTT
- Take the batteries out of the IKEA Styrbar Button
- Open the Styrbar device "Bind" tab in Z2MQTT
- Click all checkboxes under clusters so it looks like this ...
- Put the batteries back in the IKEA Button
- Press the "Actions" Bind button
you should now get a bunch of popups for each bind that was successful.
To get the battery to work again, it is possible it fixes itself, but you can also force the reporting by doing a similar process
Steps:
- Take the batteries out of the IKEA Styrbar Button
- Go to "Reporting" tab on the device in Z2MQTT and fill out for a new entry like this...
- Put the batteries back in the IKEA Button
- Press the "Actions" Apply button
The endpoint should create and save. Now you should be 100% working
This worked like a charm for me! (I am so happy right now)
This Ikea Remote drove me crazy for at least 30 hours, fiddling around and nothing worked.
What was my problem regarding this remote: updating from 1.0.024 to whatever the firmware update was - using the onboard ota by zigbee2mqtt - seemed to work first. After finishing the update firmware version was still 1.0.024. At this point the remote stopped sending actions to HA.
So i tried to trigger a forced firmware update, by lecturing the guides above regarding updating by editing my_index.json etc. (by the way: very nice to follow along - but it didn't trigger the update in my case)
As last resort i tried this binding to clusters thing and it worked like a charm. My wife is happy now, so am I :)
But my batterie percentage is at 200% now.... - i can live with that hick-up :D
drumstick77
commented
1 month ago Hi guys, I've got the same issue and have opened a new issue but no one seems to have chimed in until now. can anyone please help? thanks https://github.com/Koenkk/zigbee2mqtt/issues/23844
What happened?
When using the OTA functionality Zigbee2MQTT concludes that the version 1.0.024 is newer than the firmware available online 2.4.5, so it won't update the device.
I've tried forcing the update, but that didn't work. To accomplish that I've renamed the index.json from pull request https://github.com/Koenkk/zigbee-OTA/pull/340 to my_index.json and put it in \config\zigbee2mqtt in Home Assistant and entered /config/zigbee2mqtt/my_index.json in Zigbee2MQTT as the OTA index override file name.
What did you expect to happen?
I would have liked the device to update to the latests firmware.
How to reproduce it (minimal and precise)
Press "Check for new updates" on a Ikea Styrbar in the OTA-menu.
Zigbee2MQTT version
1.32.2-dev commit: 68ec507
Adapter firmware version
20220928
Adapter
CC2652RB
Debug log
info 2023-08-03 22:04:53: Checking if update available for 'Drukknop voordeur' info 2023-08-03 22:04:53: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"message":"Checking if update available for 'Drukknop voordeur'","meta":{"device":"Drukknop voordeur","status":"checking_if_available"},"type":"ota_update"}' debug 2023-08-03 22:04:53: Check if update available for '0x540f57fffe8f81f0' (Remote Control N2) debug 2023-08-03 22:04:53: Using endpoint '1' debug 2023-08-03 22:04:54: Received Zigbee message from 'Drukknop voordeur', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:54: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"off","battery":100,"last_seen":"2023-08-03T22:04:54+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:54: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"","battery":100,"last_seen":"2023-08-03T22:04:54+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:54: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur/action', payload 'off' debug 2023-08-03 22:04:54: Received Zigbee message from 'Drukknop voordeur', type 'commandOff', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:54: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":null,"battery":100,"last_seen":"2023-08-03T22:04:54+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' debug 2023-08-03 22:04:56: Received Zigbee message from 'Drukknop voordeur', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:56: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"arrow_right_click","battery":100,"last_seen":"2023-08-03T22:04:56+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:56: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"","battery":100,"last_seen":"2023-08-03T22:04:56+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:56: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur/action', payload 'arrow_right_click' debug 2023-08-03 22:04:56: Received Zigbee message from 'Drukknop voordeur', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":256,"value2":13}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:56: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":null,"battery":100,"last_seen":"2023-08-03T22:04:56+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' debug 2023-08-03 22:04:57: Received Zigbee message from 'Drukknop voordeur', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:57: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"arrow_left_click","battery":100,"last_seen":"2023-08-03T22:04:57+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:57: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"","battery":100,"last_seen":"2023-08-03T22:04:57+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:57: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur/action', payload 'arrow_left_click' debug 2023-08-03 22:04:57: Received Zigbee message from 'Drukknop voordeur', type 'commandTradfriArrowSingle', cluster 'genScenes', data '{"value":257,"value2":13}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:57: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":null,"battery":100,"last_seen":"2023-08-03T22:04:57+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' debug 2023-08-03 22:04:57: Received Zigbee message from 'Drukknop voordeur', type 'commandQueryNextImageRequest', cluster 'genOta', data '{"fieldControl":1,"fileVersion":65572,"imageType":4555,"manufacturerCode":4476}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:57: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":null,"battery":100,"last_seen":"2023-08-03T22:04:57+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' debug 2023-08-03 22:04:57: Got OTA request '{"fieldControl":1,"manufacturerCode":4476,"imageType":4555,"fileVersion":65572}' debug 2023-08-03 22:04:58: Received Zigbee message from 'Drukknop voordeur', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:58: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"on","battery":100,"last_seen":"2023-08-03T22:04:58+02:00","linkquality":32,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:58: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":"","battery":100,"last_seen":"2023-08-03T22:04:58+02:00","linkquality":32,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' info 2023-08-03 22:04:58: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur/action', payload 'on' debug 2023-08-03 22:04:58: Received Zigbee message from 'Drukknop voordeur', type 'commandOn', cluster 'genOnOff', data '{}' from endpoint 1 with groupID 0 info 2023-08-03 22:04:58: MQTT publish: topic 'zigbee2mqtt/Drukknop voordeur', payload '{"action":null,"battery":100,"last_seen":"2023-08-03T22:04:58+02:00","linkquality":36,"update":{"installed_version":65572,"latest_version":581,"state":"idle"},"update_available":false}' debug 2023-08-03 22:04:58: Is new image available for '0x540f57fffe8f81f0', current '{"fieldControl":1,"manufacturerCode":4476,"imageType":4555,"fileVersion":65572}', latest meta '{"fileVersion":581,"url":"http://fw.ota.homesmart.ikea.net/global/GW1.0/01.20.065/bin/10078031-zingo_kt_styrbar_remote-2.4.5.ota.ota.signed"}' debug 2023-08-03 22:04:58: Update available for '0x540f57fffe8f81f0': NO warn 2023-08-03 22:04:58: Firmware on '0x540f57fffe8f81f0' is newer than latest firmware online. info 2023-08-03 22:04:58: No update available for 'Drukknop voordeur'