search

Koenkk / zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨
https://www.zigbee2mqtt.io
GNU General Public License v3.0
12.05k stars 1.67k forks source link

Bosch BTH-RA loses Zigbee connection. re-enter in the installation code helped. #19694

Open burpy opened 11 months ago

burpy commented 11 months ago

What happened?

Bosch BTH-RA loses the Zigbee connection on the hardware is blinking orange and does not show the antenna symbol on the display. entering the installation code again in zigbee2mqtt helped. It flashed green and comes back.

What did you expect to happen?

Should stay connected.

How to reproduce it (minimal and precise)

Wait a few days.

Zigbee2MQTT version

1.33.2

Adapter firmware version

3.05.05

Adapter

SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20230324151035

Debug log

No response

xdubx commented 11 months ago

Have the same problem.

slugzero commented 10 months ago

I think I have seen something similar a few weeks ago and I believe this might be linked to an unsuccessful leave/rejoin attempt by the device. Does the device happen to be in a place with rather poor connection?

Next time when this happens, could you try to only enable "permit join" (without re-adding the install code) and report back what is happening?

xdubx commented 10 months ago

Yes. I do not enter the install code as you mentioned. The device joining after some time. You see the green led blinks up.

The connection is good with over LQI 100. Its the same floor and have only a wall between.

Maybe its the first old bug? That the coordinator don't answer on the ack? But I'm not familiar enough with the Zigbee protocol. I would probably have to generate a log and paste it here.

slugzero commented 10 months ago

Thank you for checking. I opened pull request https://github.com/Koenkk/zigbee-herdsman/pull/830, and if my assumption is right, this should fix it.

xdubx commented 10 months ago

Thank you for checking. I opened pull request https://github.com/Koenkk/zigbee-herdsman/pull/830, and if my assumption is right, this should fix it.

Thx for the fix. I will test it. Then the new update is patched on my pi :)

xdubx commented 9 months ago

did the pr is mirrored in the zigbee2mqtt repo?

slugzero commented 9 months ago

Yes, it is included in zigbee2mqtt since release 1.35.0

xdubx commented 9 months ago

My trv's still disconnects. HA have the version 1.35.1. I try to get debug logs and paste it here. Thx for the information.

jomo02 commented 7 months ago

I have the same problem with 1.36.0 and got them only reconnect by entering the installation code again.

xdubx commented 7 months ago

No i don't have the problem i must only activate the join button and wait some time or make an interaction on the trv itself.

github-actions[bot] commented 1 month ago

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days

xdubx commented 1 month ago

iam currently at 1.36. still disconnects