Closed MiAutomations closed 9 months ago
I also wish this integration. I also can help.
Would also like to see this device supported
I also like this device supported
Added! Will be supported in the 1 January release.
Is it possible to connect it out of the box to z2m? Want to buy it but want to be sure it will work (-;
Is it possible to connect it out of the box to z2m? Want to buy it but want to be sure it will work (-;
I have the same question ! I just buy it and install it, update to version 3.0, and configure it as a gateway. But now i'm stuck ! I've configure z2m with tcp and the ip of the nspannel, but it does not work
I set the NSPanel Pro to router mode but not sure how to add it to ZigBee2MQTT. I do not see any option to start pairing mode on the router. It does not work just by pushing the all join button in z2m. Any suggestion would be appreciated. Thank you!
Nevermind. I found it. Another problem though: the device drops from the network very often. No idea why. Any suggestions?
I have just purchased 2 NS Panel Pros. they are set in Router mode however in my Zigbee2MQTT they show as:
Device type Router Zigbee Model NSPanelP-Router Zigbee Manufacturer SONOFF Support status
**Not supported**
any idea why? if they have been added to zigbee2mqtt, is it my sonoff stick that is the problem?
Apparently, it works well now with the latest version of ZigBee2MQTT.
Apologies, my update script wasn't working and I was running an older version. Updated properly and now showing as supported. thanks
Nevermind. I found it. Another problem though: the device drops from the network very often. No idea why. Any suggestions?
Sorry it's been a few months but I really couldn't understand how it works
how did you use nspanel pro as a router ( or coordinator? ) on zigbee2mqtt?
What settings did you use? What port did you use?
Thanks for your future reply
Nevermind. I found it. Another problem though: the device drops from the network very often. No idea why. Any suggestions?
Sorry it's been a few months but I really couldn't understand how it works
how did you use nspanel pro as a router ( or coordinator? ) on zigbee2mqtt?
What settings did you use? What port did you use?
Thanks for your future reply
Hello
You need to change the router or coordinator from the ewelink APP after this you go to your Z2M UI and click to add a new device and on the device you selected the paring mode
Nevermind. I found it. Another problem though: the device drops from the network very often. No idea why. Any suggestions?
Sorry it's been a few months but I really couldn't understand how it works how did you use nspanel pro as a router ( or coordinator? ) on zigbee2mqtt? What settings did you use? What port did you use? Thanks for your future reply
Hello
You need to change the router or coordinator from the ewelink APP after this you go to your Z2M UI and click to add a new device and on the device you selected the paring mode
yes that i have to choose coordinator or router i knew that. i just don't know what to put in the zigbee2mqtt configuration. without configuration it doesn't start, so i can't access this UI
I'm using home assistant
im also unable to start zigbee2mqtt, in the serial config i dont know what port to add?
Nevermind. I found it. Another problem though: the device drops from the network very often. No idea why. Any suggestions?
Sorry it's been a few months but I really couldn't understand how it works how did you use nspanel pro as a router ( or coordinator? ) on zigbee2mqtt? What settings did you use? What port did you use? Thanks for your future reply
Hello You need to change the router or coordinator from the ewelink APP after this you go to your Z2M UI and click to add a new device and on the device you selected the paring mode
yes that i have to choose coordinator or router i knew that. i just don't know what to put in the zigbee2mqtt configuration. without configuration it doesn't start, so i can't access this UI
I'm using home assistant
did you managed to get it working?
Link
https://itead.cc/product/sonoff-nspanel-pro-smart-home-control-panel/
Database entry
{"id":79,"type":"Router","ieeeAddr":"0xe0798dfffeb25098","nwkAddr":18228,"manufId":4098,"manufName":"SONOFF","powerSource":"Unknown","modelId":"NSPanelP-Router","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":7,"inClusterList":[0,3],"outClusterList":[0,3],"clusters":{"genBasic":{"attributes":{"modelId":"NSPanelP-Router","manufacturerName":"SONOFF"}}},"binds":[],"configuredReportings":[],"meta":{}}},"zclVersion":3,"interviewCompleted":true,"meta":{},"lastSeen":1700038992754,"defaultSendRequestWhen":"immediate"}
Comments
Hello Team
With the new firmware version available for the NSpanel PRO Sonoff Device The device have the possibility ack as zigbee router
I try to add this device as a Router to Z2M but appear as not supported
I'm sharing the database entry of this device in order if you can help me to get this device supported in the Z2M list os devices
Please let me know if you need anything more from my side
Thank you in advance for your support and best regards
External converter
No response
Supported color modes
No response
Color temperature range
No response