[Wrong device]: Zimismart SPM01-D2TZ recognised as Yagusmart SPM01-D2TZ

[mrmaximas]

Link

https://www.zemismart.com/products/spm01-d2tz-zm

Model

SPM01-D2TZ

Description

Zemismart Tuya Zigbee Real-time Smart Energy Monitor / Electric Energy Meter

Vendor

Zimismart

Picture (link)

https://ueeshop.ly200-cdn.com/u_file/UPAC/UPAC387/2304/products/10/507226290e.jpg.500x500.jpg

Database entry

{"id":53,"type":"Router","ieeeAddr":"0x187a3efffe358554","nwkAddr":415,"manufId":4098,"manufName":"_TZE200_bcusnqt8","powerSource":"Mains (single phase)","modelId":"TS0601","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[0,4,5,61184],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"65503":"\u0000\u0000\u0000\u0000\u0005","65506":31,"65508":0,"65534":0,"modelId":"TS0601","manufacturerName":"_TZE200_bcusnqt8","powerSource":1,"zclVersion":3,"appVersion":68,"stackVersion":0,"hwVersion":1,"dateCode":""}}},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":68,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":-708457359},"lastSeen":1701777078797,"defaultSendRequestWhen":"immediate"}

Notes

No response

[mrmaximas]

Additional - I found issue with current converter. When trying to set Current calibration from -1 to -19 it does not affect to the reports, but with -20 it does. -19 2023-12-05 16:48:25MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.5,"energy":0.6,"linkquality":51,"power":424,"produced_energy":0.15,"voltage":236.6}' -20 Info 2023-12-05 16:48:25MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":1.59,"energy":0.6,"linkquality":51,"power":442,"produced_energy":0.15,"voltage":236.5}' -19 again 2023-12-05 16:49:56MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.57,"energy":0.6,"linkquality":51,"power":438,"produced_energy":0.15,"voltage":237}' Info 2023-12-05 16:49:56MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.57,"energy":0.6,"linkquality":47,"power":438,"produced_energy":0.15,"voltage":237}' Info 2023-12-05 16:49:56MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.52,"energy":0.6,"linkquality":51,"power":435,"produced_energy":0.15,"voltage":236.8 0 2023-12-05 16:54:35MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.55,"energy":0.6,"linkquality":51,"power":434,"produced_energy":0.15,"voltage":236}' Info 2023-12-05 16:54:35MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.55,"energy":0.6,"linkquality":51,"power":434,"produced_energy":0.15,"voltage":236}' Info 2023-12-05 16:54:35MQTT publish: topic 'zigbee2mqtt/Power Counter', payload '{"current":2.57,"energy":0.6,"linkquality":47,"power":435,"produced_energy":0.15,"voltage":236.1}'

[mrmaximas]

@Koenkk

[github-actions[bot]]

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days

[emilic14]

There is another issue with this configuration, It can not see negative values when connected to a home with photo voltaic injection. It actually adds the values of consumption and injection and it is showing it as a positive value... I would expect it to show the actual injected power as negative (or possitive if when no injection the usage is negative... depending how the device was placed).

Also the correct link and name of the company doing this device is Zemismart (not zimismart)