[New device support]: Tuya Presence mmWave Radar Sensor 24G , TS0225 _TZFED8_o7oe4n9a

[MicroFire33]

Link

https://fr.aliexpress.com/item/1005006016522811.html

Database entry

{"id":85,"type":"Router","ieeeAddr":"0xa4c138480c8f3d85","nwkAddr":35901,"manufId":4417,"manufName":"_TZFED8_o7oe4n9a","powerSource":"Mains (single phase)","modelId":"TS0225","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":1026,"inClusterList":[0,3,4,1280,8,4096],"outClusterList":[10,25],"clusters":{"genBasic":{"attributes":{"65503":"\u0000\u0000\u0000\u0000\f\u0000\u0000\u0000\u0000\u0007","65507":"sdk:0.0.0;kfg:0.0.0;ker:0.0.0;","65508":0,"65534":0,"modelId":"TS0225","manufacturerName":"_TZFED8_o7oe4n9a","powerSource":1,"zclVersion":3,"appVersion":69,"stackVersion":1,"hwVersion":1,"dateCode":""}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b00256c4da8","zoneState":0}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":69,"stackVersion":1,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":-708457359},"lastSeen":1701946040712,"defaultSendRequestWhen":"immediate"}

Comments

No response

Supported color modes

No response

Color temperature range

No response

[MicroFire33]

Add External converter

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const extend = require('zigbee-herdsman-converters/lib/extend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
    fingerprint: [{ modelID: 'TS0225',manufacturerName: '_TZFED8_o7oe4n9a'}],
    model: 'TS0225',
    vendor: 'TuYa',
    description: 'Smart Human presence sensor',
    onEvent: tuya.onEventSetTime, 
    configure: async (device, coordinatorEndpoint, logger) => {
                const endpoint = device.getEndpoint(1);
                await reporting.bind(endpoint, coordinatorEndpoint, ['genTime', 'genBasic', 'ssIasZone']);
            },

    fromZigbee: [tuya.fz.datapoints, fz.ias_occupancy_alarm_1],
    toZigbee: [tuya.tz.datapoints],

    exposes: [
            e.occupancy(),
            e.illuminance_lux(),
            e.numeric('target_distance', ea.STATE).withDescription('Distance to target').withUnit('m'),
        ],
    meta: {
        tuyaDatapoints: [
            [181, 'illuminance_lux', tuya.valueConverter.raw],
            [182, 'target_distance', tuya.valueConverter.divideBy10],
        ],
    },
};

module.exports = definition;

[MicroFire33]

Add picture:

[MicroFire33]

[GitTheFOuttaHere]

I have a sensor that looks identical. It has the model _TZFED8_o7oe4n9a. I made a converter that looked exactly as yours. Later adding a dp which I thought was for presence/occupancy because it appeared to correlate in the debug logs. Unfortunately I did not get the same results as you. My occupancy is NULL, the link sig quality is probably right....the others are way off. Though I did notice the LUX changes value with respect to the brightness & the distance to target digits at the end change when I move around. Hopefully my tuya hub will arrive soon & I can try to work it out.

[GitTheFOuttaHere]

[GitTheFOuttaHere]

Can I ask if you have tried turning yours off (simulating a power cut/blackout) & seeing if the values change to something like mine (first photo) when it comes back online?. I'm sure I had working at some point on the external converter showing the correct values. After a power cycle the values now show what you see in the photo above. Though it says "occupied" this never changes.

[MicroFire33]

To begin with, sorry for my English, I am French. I test when I get home from work to unplug it and plug it back in to see.

[MicroFire33]

Indeed, I have the same problem.

[MicroFire33]

On the other hand, even after unplugging "Occupancy" still works but the other 2 values ​​are crazy.

[GitTheFOuttaHere]

It's the reason I didn't upload the converter I had for you to use.

Though I still don't get occupancy to work. It shows either occupied "true" or "false", but it never changes with motion.

After trying a few power cycles, the lux & distance shows all kinds of different values.

I'm sure someone has a simple answer.

[MicroFire33]

After several reconnection tests, the "Occupancy" works every time, however now the distance is completely crazy but after restarting Z2M the Lux becomes normal again.

[MicroFire33]

I test when I get home from work, however I have an idea for the errors in my distance sensor. Because when it was working it was on the floor and it aimed at the ceiling. And now it is positioned horizontally to do the tests and in the manual it says that the distance must be 3 meters maximum with the ground.

[MicroFire33]

Remote update, I'm testing the sensor position this evening

[MicroFire33]

I obtain consistent results using my converter, because with yours if I touch the cursor it always remains on busy. And indeed the distance is just right when he aims at the ceiling while waiting to fix it.

[GitTheFOuttaHere]

These were the datapoints I discovered, not sure what all of them mean.

Trigger sensitivity - DP114 触发灵敏度 Status interval change - DP101- 状态变化间隔 Light Illuminance - DP181 光照度 No One Delays - DP102 无人延时 Distance to target - DP182 距离 Distance Interval Data - DP183 距离区间数据 Distance Interval Switch - DP105- 距离区间开关 Sensitivity - DP110 Request to send Someone - DP126 Pattern Changes - DP176-

[GitTheFOuttaHere]

const fz = require('zigbee-herdsman-converters/converters/fromZigbee'); const tz = require('zigbee-herdsman-converters/converters/toZigbee'); const exposes = require('zigbee-herdsman-converters/lib/exposes'); const reporting = require('zigbee-herdsman-converters/lib/reporting'); const extend = require('zigbee-herdsman-converters/lib/extend'); const e = exposes.presets; const ea = exposes.access; const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = { fingerprint: [{ modelID: 'TS0225',manufacturerName: '_TZFED8_o7oe4n9a'}], model: 'TS0225', vendor: 'TuYa', description: 'Smart Human presence sensor', onEvent: tuya.onEventSetTime, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); await reporting.bind(endpoint, coordinatorEndpoint, ['genTime', 'genBasic', 'ssIasZone']); },

fromZigbee: [tuya.fz.datapoints, fz.ias_occupancy_alarm_1], toZigbee: [tuya.tz.datapoints],

exposes: [ e.occupancy(), e.illuminance_lux(), e.numeric('target_distance', ea.STATE).withDescription('Distance to target').withUnit('m'), e.numeric('fading_time', ea.STATE_SET).withValueMin(0).withValueMax(60).withValueStep(1).withUnit('s') .withDescription('Occupancy keep time'), e.numeric('sensitivity', ea.STATE_SET).withValueMin(0).withValueMax(10).withValueStep(1).withUnit('S') .withDescription('Occupancy Sensitivity - 1 = Highest 10 = Lowest'), e.numeric('motion_sensitivity', ea.STATE_SET).withValueMin(0).withValueMax(20).withValueStep(1).withUnit('S') .withDescription('Radar Sensitivity - 1 = Highest 20 = Lowest'), ], meta: { tuyaDatapoints: [ [1, 'occupancy', tuya.valueConverter.trueFalse1], [102, 'fading_time', tuya.valueConverter.raw], [110, 'sensitivity', tuya.valueConverter.raw], [181, 'illuminance_lux', tuya.valueConverter.raw], [182, 'target_distance', tuya.valueConverter.divideBy100], [114, 'motion_sensitivity', tuya.valueConverter.raw], ], },

};

module.exports = definition;

[GitTheFOuttaHere]

The above converter works okay for me.

Maybe your occupancy is different to mine & you can remove that line referencing the datapoint?.

Mine is certainly on DP1

All the best

[MicroFire33]

The first tests are positive, thank you

[GitTheFOuttaHere]

The first tests are positive, thank you

You are most welcome. Hope everything goes well for you.

Merry Christmas

[MicroFire33]

The first tests are positive, thank you

You are most welcome. Hope everything goes well for you.

Merry Christmas

Good morning, Thank you, happy New Year to you too. And I installed the detector in my house and the results are conclusive. Thanks again for your help.

[GitTheFOuttaHere]

That's great news. Hopefully others will find the converter useful as well as I'm sure more people will receive these.

Have a great new year, friend. Stay safe in 2024 :)

[github-actions[bot]]

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days