Open Appoxus opened 8 months ago
Idk if it helps, but here's the Manual. It seems to be possible to switch between energy saving and comfort mode (PID controlled).
The TRVs seem to be doing their Job OK atm. Only over night the valves dropped down to 5 degrees, I think its related to the schedule.
Something seems to be wrong with the calibration offset. It randomly jumps to -429496721.5 I'm using this Blueprint to control the valves: https://community.home-assistant.io/t/advanced-heating-control/469873 But I'm seeing the same behavior with Better Thermostat. I can't tell if it's a Z2M error or a failure on the automation side.
Hello, I'm Raul. I have a new TRV device, and I am its manufacturer. The company's name is Giexperience. Can I send you a sample? Could you assist me in creating support for it on '2MQTT (New device support)'?Best regards GIEXSMART@126.COM
It’s this TRV. can you help me?
@Giexperience does it use the same protocol?
@Koenkk is it possible to deactivate the schedule?
I'm currerntly setting the schedule for every day as following:
03:00/16.0 03:00/16.0 03:00/16.0 03:00/16.0
The TRV ist set to Manual, but Z2M Shows the mode as auto, See attached screenshot.
The temperature calibration is also not working as intended. Sometimes it jumps to bogus values like -42000 or something like that, resulting in showing 30 degree measured temperature on the TRV.
Even on those valves that are not controlled by an automation.
Temperature calibration went off again, see attached screenshot.
@Appoxus I know little about the behaviour of this device (don't have it)
@Giexperience它使用相同的协议吗?
They are Tuya ZigBee. But we are different manufacturers. The firmware is different.
is this device now supported? i paired it successfully but z2m says unsupported.
Hello,
Thank you for reaching out.
Many users have successfully used this device with Z2M. I apologize, as I am not an expert in this area. However, here is a post from another user that might be helpful to you: https://github.com/Koenkk/zigbee-herdsman-converters/pull/4929#issuecomment-1996569692
I hope this helps. Please let me know if you need any further assistance.
Best regards,
GIEXSMART-Raul
GIEX-CINLIN-RAUL | |
---|---|
@. | ---- Replied Message ---- | From | Chrigu @.> | | Date | 5/29/2024 20:48 | | To | @.> | | Cc | @.> , @.***> | | Subject | Re: [Koenkk/zigbee2mqtt] [New device support]: Moes ZTRV-801-EN (Issue #20189) |
is this device now supported? i paired it successfully but z2m says unsupported.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
Has anyone managed to connect an external converter for this TRV valve? I also bought this model: but it does not support Z2M.
Link
https://de.aliexpress.com/item/1005006194184981.html?src=google&aff_fcid=d9fb02d4926e4ccfb968ddb2709d14fa-1701894068736-04266-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=d9fb02d4926e4ccfb968ddb2709d14fa-1701894068736-04266-UneMJZVf&terminal_id=37aa72aa1a514423b2841296bbaae943&afSmartRedirect=y
Database entry
{"id":11,"type":"EndDevice","ieeeAddr":"0xa4c1389685b118e8","nwkAddr":21500,"manufId":4417,"manufName":"_TZE200_rtrmfadk","powerSource":"Battery","modelId":"TS0601","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[4,5,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"65503":"\u000b{\u000b-i\f{\u000b-i\r{\u000b-i\u000e{\u000b-iS~\u000b-iU~\u000b-iV~\u000b-i","65506":56,"65508":0,"65534":0,"modelId":"TS0601","manufacturerName":"_TZE200_rtrmfadk","powerSource":3,"zclVersion":3,"appVersion":72,"stackVersion":0,"hwVersion":1,"dateCode":""}}},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":72,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":-708457359},"lastSeen":1702447427274,"defaultSendRequestWhen":"immediate"}
Comments
I bought some of these on Aliexpress and they get detected as TS0601 by Z2M. They're a ripoff of the Bosch Thermostat and there's a Wifi version as well.
Setting the temperature, child lock and window mode via HA seems to work, the schedule won't work. The Debug log throws some errors. Could you please have a look at this?
Here's the Debug log after pairing and trying to set temperatures and the schedule via HA. FYI I wanted to remove the schedule, since I plan to do the scheduling via HA.
debug_log_TRV801.txt
Thank you for your support!
External converter
No response
Supported color modes
No response
Color temperature range
No response