search

Koenkk / zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨
https://www.zigbee2mqtt.io
GNU General Public License v3.0
11.57k stars 1.63k forks source link

Bosch Twintguard was not paired #20211

Open boldiebold opened 7 months ago

boldiebold commented 7 months ago

What happened?

z2m work so far on my HA Yellow device. I was able to pair 106 devices. (73 routers, 33 end-devices)

Now I´m fighting with my Bosch Twintguards.

Device joined, interview was started but every time it will stop with an error successful paring not possible. Twintguard were factory reseted.

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.34.0

Adapter firmware version

7.3.1.0 build 176

Adapter

EZSP v12

Debug log

log.txt

Mikkooooo commented 7 months ago

What happened?

z2m work so far on my HA Yellow device. I was able to pair 106 devices. (73 routers, 33 end-devices)

Now I´m fighting with my Bosch Twintguards.

  • Installation code was added.
  • Paring was activated just for coordinator

Device joined, interview was started but every time it will stop with an error successful paring not possible. Twintguard were factory reseted.

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.34.0

Adapter firmware version

7.3.1.0 build 176

Adapter

EZSP v12

Debug log

log.txt

Hi, I have these problems too with the Sonoff Dongle E. Some members write here that it is the Sonoff Dongle E that causes the issues. Last week I successfully paired a Bosch BSD-2 smoke detector, also with installation code. I tried everything possible to pair the Twinguard - all without success. Do you also have the dongle E (eszp v12)? Do you have the FW on? 7.3.1.0 build 176 flashed?

danieledwardgeorgehitchcock commented 7 months ago

Duplicate of #20169

vaenror commented 6 months ago

Same Problem here with a Sonoff Dongle-E. BSD-2 with install code works just fine. I bought the E exclusively to pair devices with install codes and now the TwinGuard doesn’t pair/interview :( (Also flashed with current MultiPan)

S474N commented 1 month ago

Also problem with pairing. I have 9 pieces of BSD-2. 8 paired OK, but the last has problem.

Coordinator: zStack3x0 (SLZB-06) Revision: 20240315 Z2M: 1.38.0 commit: fe048e6

Info 2024-06-02 18:50:56MQTT publish: topic 'Z2M/0xf082c0fffe0ab753', payload '{"last_seen":"2024-06-02T16:50:56.209Z"}'
...
Error 2024-06-02 18:51:01Interview failed for '0xf082c0fffe0ab753 with error 'Error: Interview failed because can not get node descriptor ('0xf082c0fffe0ab753')'
Error 2024-06-02 18:51:01Failed to interview '0xf082c0fffe0ab753', device has not successfully been paired
Info 2024-06-02 18:51:01MQTT publish: topic 'Z2M/bridge/event', payload '{"data":{"friendly_name":"0xf082c0fffe0ab753","ieee_address":"0xf082c0fffe0ab753","status":"failed"},"type":"device_interview"}'
Info 2024-06-02 18:51:01MQTT publish: topic 'Z2M/bridge/log', payload '{"message":"interview_failed","meta":{"friendly_name":"0xf082c0fffe0ab753"},"type":"pairing"}'
Info 2024-06-02 18:51:01MQTT publish: topic 'Z2M/0xf082c0fffe0ab753', payload '{"last_seen":"2024-06-02T16:51:01.456Z"}'
Info 2024-06-02 18:51:01Interview for '0xf082c0fffe0ab753' started
Info 2024-06-02 18:51:01Starting interview of '0xf082c0fffe0ab753'
Info 2024-06-02 18:51:02MQTT publish: topic 'Z2M/bridge/event', payload '{"data":{"friendly_name":"0xf082c0fffe0ab753","ieee_address":"0xf082c0fffe0ab753","status":"started"},"type":"device_interview"}'
Info 2024-06-02 18:51:02MQTT publish: topic 'Z2M/bridge/log', payload '{"message":"interview_started","meta":{"friendly_name":"0xf082c0fffe0ab753"},"type":"pairing"}'

image

After clicking to DEV CONSOLE on device: image