Open metallmanu opened 7 months ago
Hello,
unfortunately I have the same problem. I have to set my thermostats to Normally-Closed. If I set this before pairing (in the installation menu), it unfortunately changes it back to Normally-Open after pairing.
It would be really great if this could be set!
Thank you!
What happened?
Bosch BTH-RM230Z / RBSH-RTH0-ZB-EU is not supported yet. The system_mode cool is missing and also to set the valves either to no (normaly open) or nc (normaly closed)
What did you expect to happen?
Bosch BTH-RM230Z / RBSH-RTH0-ZB-EU will be supported through installation code. system_mode cool is available --> ctrl_sequence_of_oper must be set from 0x02 Heating Only to 0x04 Cooling and Heating. Also it would be nice to set the valve behaviour from no to nc
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.34.0
Adapter firmware version
20221226
Adapter
cc2652 slaesh
Debug log
No response