Open diaz66 opened 8 months ago
Hi,
From a brief look over your logs, the issue seems more to to with Z2M being unable to communicate with your coordinator adapter.
Instead of using the devices symlinked path /dev/ttyACM0
try using its full address path from /dev/serial/by-id/
It also seems strange that you are getting a cannot lock port
error - this usually occurs if you have a competing resource trying to use the same adapter..
Thanks for the reply.
port: >-
/dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20221031111922-if00
...and updated version to 1.35.1-1
Let's see what happens.
However, I confirm that with version 1.34.0-1 everything is fine.
Hi,
From a brief look over your logs, the issue seems more to to with Z2M being unable to communicate with your coordinator adapter.
Instead of using the devices symlinked path
/dev/ttyACM0
try using its full address path from/dev/serial/by-id/
It also seems strange that you are getting a
cannot lock port
error - this usually occurs if you have a competing resource trying to use the same adapter..
it also occurred again with /dev/serial/by-id/usb-ITEAD_SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2_20221031111922-if00
also reported by Yves-Be
It looks quite similar to this one
Seems likely. Does dmesg
show similar messages as in my issue?
I've been running 1.36.1 for a week now, and I didn't have this issue anymore.
I've been running 1.36.1 for a week now, and I didn't have this issue anymore.
not so good for me. Now:
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
error 2024-04-30 22:22:11: Exception while calling fromZigbee converter: ZCL command 0x4c5bb3fffe2eeaf7/1 manuSpecificTuya.mcuGatewayConnectionStatus({"payloadSize":1,"payload":1}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (sendZclFrameToEndpointInternal error)}
....and the device stops sending data....it starts sending data again only after device reconfiguration.... `....the only difference is that only that device is blocked and not all zigbee2mqtt....
Strange, everything else seems the same, apart from me using channel 11, and my ZB-GW04 USB dongle that i use on /dev/ttyUSB0 instead of /dev/ttyACM0. It's also still on 6.10.3.0 build 297. I didn't apply any calibrations, but I think that shouldn't matter either.
Strange yes. I have now installed version 1.35.3-1. with this version I have never encountered problems like with 1.34.0-1.
I "played" with the calibrations but the problems seem to be linked to the versions....
I did get a crash 2 days later, but I've since been using 1.37.x with the ember adapter and 7.4.2 FW instead of ezsp. No issues after more than two and a half weeks, so I'd give that a go. Flashing the stick was pretty easy, and the network still worked without having to re-pair anything. Good guide here.
What happened?
My configuration homeassistant: true mqtt: server: mqtt://core-mosquitto user: password: serial: port: /dev/ttyACM0 adapter: ezsp frontend: port: 8099 advanced: homeassistant_legacy_entity_attributes: false legacy_api: false legacy_availability_payload: false log_syslog: app_name: Zigbee2MQTT eol: /n host: localhost localhost: localhost path: /dev/log pid: process.pid port: 123 protocol: tcp4 type: '5424' channel: 25 log_level: info device_options: legacy: false devices: '0xe0798dfffea826ff': friendly_name: Router ZBDongle-E '0x003c84fffef0ecca': friendly_name: ZigBee Termosifone Camera Mat '0xa4c1380483ecb1b5': friendly_name: ZigBee Termometro Sala '0xa4c13878a044e674': friendly_name: ZigBee Termometro Soggiorno '0xa4c138fa78091d52': friendly_name: ZigBee Presa Frigorifero '0xa4c138bab31104b2': friendly_name: ZigBee Luce Terrazzo Camera Matrimoniale '0xa4c13831eaf7dbba': friendly_name: ZigBee Tapparella1 Sala '0xa4c138c3b27cee34': friendly_name: ZigBee Lampada Luna '0xa4c138bcec51d379': friendly_name: ZigBee Luce Sala '0xa4c1383aad8d029e': friendly_name: ZigBee Presa Sala TV '0xa4c138e52b567c58': friendly_name: ZigBee Presa Camera Grande Play '0xa4c138fe60c0d996': friendly_name: ZigBee Presa Camera Grande PC '0xa4c138ddd7cffecf': friendly_name: ZigBee Presa Soggiorno TV '0xa4c1388b23a3bf79': friendly_name: ZigBee Porta Frigo '0xa4c1382e0495eafe': friendly_name: ZigBee Porta Congelatore '0xa4c138a06155b4d5': friendly_name: ZigBee Luce Camera Grande power_precision: 1 power_calibration: 3000 current_calibration: 100 energy_precision: 1 voltage_precision: 1 current_precision: 1 state_action: true '0x70ac08fffe366ce1': friendly_name: Zigbee Power Meter Casa energy_precision: 2 energy_calibration: 1 current_precision: 2 power_precision: 2 voltage_precision: 2 current_calibration: 1 power_calibration: 1 voltage_calibration: 1 '0xa4c13851ad8d6f9b': friendly_name: ZigBee Termometro Esterno temperature_precision: 1 '0xa4c1383a8254d9ae': friendly_name: ZigBee Termometro Camera Grande '0xa4c1382c28303539': friendly_name: ZigBee Termometro Camera Piccola '0xa4c13818fe6c6cd3': friendly_name: ZigBee Porta Ingresso Interna '0xa4c13800b40af798': friendly_name: ZigBee Porta Ingresso Esterna '0xa4c1380aa558d939': friendly_name: ZigBee Presa Camera Piccola '0xa4c138af878589ac': friendly_name: ZigBee Presa Camera Mat '0xa4c138351db79811': friendly_name: ZigBee Sensore Acqua Esterno '0x4c5bb3fffe2eeaf7': friendly_name: Zigbee Power Meter Cucina description: Cappa Cucina + le due prese current_calibration: 1 current_precision: 2 power_precision: 2 voltage_precision: 2 energy_precision: 2 power_calibration: 1 voltage_calibration: 1 energy_calibration: 1 '0x00124b00291ffbe0': friendly_name: ZigBee Termometro Camera Mat blocklist: [] availability: false
What did you expect to happen?
I downgraded the addon version to 1.34.0-1 and I no longer encounter these errors
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.35.1-1
Adapter firmware version
6.10.3.0 build 297
Adapter
EZSP v8
Setup
Add On Home Assistant Generic x86-64
Debug log
log.txt debug
herdsman debug log