[Wrong device]: Water leak sensor Onenuo 898GZ identified as Aubess IH-K665

[klu16]

Link

https://pl.aliexpress.com/item/1005006579032290.html

Model

898GZ

Description

Water leak sensor

Vendor

Onenuo

Picture (link)

https://ibb.co/Xpwq0Rn

Database entry

{"id":20,"type":"EndDevice","ieeeAddr":"0xa4c138326b87162a","nwkAddr":58547,"manufId":4417,"manufName":"_TZ3000_upgcbody","powerSource":"Battery","modelId":"TS0207","epList":[1],"endpoints":{"1":{"profId":260,"epId":1,"devId":1026,"inClusterList":[1,3,1280,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"modelId":"TS0207","manufacturerName":"_TZ3000_upgcbody","powerSource":3,"zclVersion":3,"appVersion":65,"stackVersion":0,"hwVersion":1,"dateCode":""}},"ssIasZone":{"attributes":{"iasCieAddr":"0x00124b002a2f276b","zoneState":1}},"genPowerCfg":{"attributes":{"batteryPercentageRemaining":200}}},"binds":[{"cluster":1,"type":"endpoint","deviceIeeeAddress":"0x00124b002a2f276b","endpointID":1}],"configuredReportings":[{"cluster":1,"attrId":33,"minRepIntval":3600,"maxRepIntval":65000,"repChange":0,"manufacturerCode":null}],"meta":{}}},"appVersion":65,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":491743244},"lastSeen":1710314783189}

Notes

but it should be this one: https://www.zigbee2mqtt.io/devices/TS0207_water_leak_detector.html

Z2M details (stick: Sonoff Dongle-P):

[TheNutHouse84]

Another user reported same issue with same device

I have the same water leak sensor (Onenuo) and have the same mis-identification.

In z2m ver 1.35.3 it was "more" correctly (physical appearance wise) identified as "TS0207_water_leak_detector_2" and showed correct picture.

After upgrade to 1.36.0 it was mis-id'd

I also have this version of nearly identical water leak sensor and it is listed in z2m as "TS0207_water_leak_detector" and was correctly identified in bot 1.35.3 and 1.36.0

As a side note to anyone contemplating purchase of these devices. The Onenuo style/brand (imo) is constructed better, the case is made of better quality plastic and the fit and finish is better. Both work equally well though.

The Onenuo has the activity LED at the top of the case away from the sensor cord while the "lower quality" version has the activity LED at the bottom of the case near the sensor cord. This is what I observed in my purchased units and may not apply equally to other Aliexpress stores/variants.

[Bsector]

I bought the same 898EZ sensor from ONENUO and the same identification error occurs. Furthermore, the value of Water lake is not being exported. Does the same happen to you? How could I fix this?

[klu16]

I bought the same 898EZ sensor from ONENUO and the same identification error occurs. Furthermore, the value of Water lake is not being exported. Does the same happen to you? How could I fix this?

No, entities are identified fine. Just the model is wrong.

[Bsector]

Hello, has anyone managed to solve this problem?

[lordlightman]

Same problem occurs with ONENUO model 898WZ. Device was interviewed for a long, long time and then identified as Aubess IH-K665.

[WJ4IoT]

Just some additional info: One of these devices replaces my defective drainage pump float ("vlotter") and performs its work now for 4 months 24/7 with an average rate of 30 times a hour (due to a high level of groundwater) so estimated now roundish 86.000 times. I cannot recall if I replaced batteries (most likely I did) because battery level is still 100%. payload contains all info:

payload '{"battery":100,"battery_low":false,"linkquality":90,"tamper":false,"water_leak":false}'

Just checked if I was was still on the latest Z2M container and tried to reconfigure device. This will give a lot of errors but device keeps on working.

In other words I like the integration with Z2M and care a bit less the picture has changed.

[github-actions[bot]]

This issue is stale because it has been open 180 days with no activity. Remove stale label or comment or this will be closed in 30 days

[klu16]

It's still wrong detecting.

[shawnhaywood]

I purchased a device recognized by Zigbee2mqtt as Aubess IH-K665, but doesn't match the picture showing in Home Assistant Zigbee2MQTT dashboard. This is what the device looks like. The device registers fine and will detect a leak, but doesn't report a periodic update.