Frient Intelligent Smoke Alarm (SMSZB-120) failed to configure

[dajomas]

What happened?

Adding multiple Frient Intelligent Smoke Alarms (SMSZB-120) seems to work succesfully but the following message appears 3 times:

Error 2024-03-27 09:44:48 Failed to configure '0x0015bc003101e692', attempt 3 (Error: Bind 0x0015bc003101e692/35 genBasic from '0x00212effff05f5d7/1' failed (Error: status: 140) at DeconzAdapter.bind (/srv/zigbee2mqtt.git/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:776:19) at Endpoint.bind (/srv/zigbee2mqtt.git/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:551:13) at Object.bind (/srv/zigbee2mqtt.git/node_modules/zigbee-herdsman-converters/src/lib/reporting.ts:43:9) at Object.configure (/srv/zigbee2mqtt.git/node_modules/zigbee-herdsman-converters/src/devices/develco.ts:495:13) at Configure.configure (/srv/zigbee2mqtt.git/lib/extension/configure.ts:122:13) at EventEmitter.wrappedCallback (/srv/zigbee2mqtt.git/lib/eventBus.ts:174:17))

What did you expect to happen?

Succesful inclusion of the Frient Intelligent Smoke Alarms (SMSZB-120) without the error message

How to reproduce it (minimal and precise)

• Remove the Frient Intelligent Smoke Alarm (SMSZB-120) via the web interface if it exists
• Allow Zigbee2mqtt to permit joins
• Put the Frient Intelligent Smoke Alarm (SMSZB-120) in inclusion mode

Zigbee2mqtt will find the device, add it to the device list, and will try to configure the device. This is when the error appears

Zigbee2MQTT version

1.36.0

Adapter firmware version

0x26720700

Adapter

ConBee2/RaspBee2

Setup

Plain on RPi from git repository via systemd

Debug log

Here is the debug log starting at the removal of the device:

debug_log.txt

[Articole]

Hello, i have exactly the same error with SMSZB-120.

After that, there are missing values like Battery and Temperature... Temporarly, for getting theses values working, i followed this #14997

But the error continue to appear.

Zigbee2MQTT version : 1.36.0 (Last Stable) Adapter firmware version : 0x26500900 (Last) Adapter : ConBee3 Raspberry PI 3B+ : Fresh Install to test if it was from my configuration

[Rappelkiste98]

As far as i know this problem relais to the ConBee Coordinators and the Firmware for this. Other Coordinators doesn't have this problem. It also can be a problem with the driver for ConBee

[rvalle]

I got this device today, I just cannot get it to pair. tried updating to latest z2m, force delete, restarts, etc.

wont pair....

SMSZB-120 HW: 5.2.0

error 2024-05-06 20:49:45Interview failed for '0x..... with error 'Error: Interview failed because can not get node descriptor ('0x0015bc0031023408')'
error 2024-05-06 20:49:45Failed to interview '0x....', device has not successfully been paired