Problem with Tuya switch WHD-02, offline

[Ant118]

What happened?

Tuya WHD02 switch offline. If you press the button directly on the device, it appears online again

What did you expect to happen?

No response

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

1.36.1-dev commit: 1544317

Adapter firmware version

7.4.1 [GA]

Adapter

SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2 (Dongle E)

Setup

Home Assistant addon

Debug log

[2024-04-29 13:54:44] warning: z2m: Failed to ping 'ShkafLight' (attempt 1/1, ZCL command 0x70b3d52b6007fcf0/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":true,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (ERROR_INVALID_CALL)) [2024-04-29 13:54:47] debug: z2m: Active device 'ShkafLight' was last seen '30.32' minutes ago.

[2024-04-29 14:04:48] error: zh:ember:ezsp: [SEND COMMAND] Cannot send second one before processing response from first one. [2024-04-29 14:04:48] debug: zh:controller:endpoint: ZCL command 0x70b3d52b6007fcf0/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":true,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (ERROR_INVALID_CALL) [2024-04-29 14:04:48] warning: z2m: Failed to ping 'ShkafLight' (attempt 1/1, ZCL command 0x70b3d52b6007fcf0/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":true,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (ERROR_INVALID_CALL)) [2024-04-29 14:04:51] debug: z2m: Active device 'ShkafLight' was last seen '40.39' minutes ago. [2024-04-29 14:07:30] debug: z2m: Saving state to file /config/zigbee2mqtt/state.json

[Ant118]

when I press the button on the device, the device does not always appear

[Ant118]

[Ant118]

It is problem adapter firmware version 7.4.1. 6.10.7.0 build 435 - OK.