[New device support]: WZ-M100-C 24G

Link

https://www.aliexpress.com/i/1005004704966668.html

Database entry

{"id":13,"type":"Router","ieeeAddr":"0xa4c138bdc6fcf4c3","nwkAddr":10356,"manufId":4417,"manufName":"_TZE204_7gclukjs","powerSource":"Mains (single phase)","modelId":"TS0601","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":81,"inClusterList":[4,5,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"stackVersion":0,"dateCode":""}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":74,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{},"lastSeen":1714403823536}

Comments

Here is the attached external definition for the 24G variant for the WZ-M100-C 24G

External definition

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
    fingerprint: [
        {
            modelID: 'TS0601',
            manufacturerName: '_TZE204_7gclukjs',
        },
    ],
    model: 'ZY-M100-24GV2',
    vendor: 'TuYa',
    description: '24G Presense Sensor',
    fromZigbee: [tuya.fz.datapoints],
    toZigbee: [tuya.tz.datapoints],
    onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime'
    configure: tuya.configureMagicPacket,
    exposes: [

        exposes.enum('state', ea.STATE, ['none', 'presence', 'move'])
        .withDescription('presence status'),

        e.presence().withDescription('not at home'),

        exposes.numeric('distance', ea.STATE)
        .withDescription('distance'),

        e.illuminance_lux(),

        exposes.numeric('radar_sensitivity', ea.STATE_SET).withValueMin(1)
        .withValueMax(10)
        .withValueStep(1)
        .withDescription('radar_sensitivity'),

        exposes.numeric('presence_sensitivity', ea.STATE_SET).withValueMin(1)
        .withValueMax(10)
        .withValueStep(1)
        .withDescription('presence_sensitivity'),

        exposes.numeric('detection_distance_min', ea.STATE_SET).withValueMin(0)
        .withValueMax(8.25)
        .withValueStep(0.75)
        .withUnit('m').withDescription('detection_distance_min'),

        exposes.numeric('detection_distance_max', ea.STATE_SET).withValueMin(0.75)
        .withValueMax(9)
        .withValueStep(0.75)
        .withUnit('m').withDescription('detection_distance_max'),

        exposes.numeric('keep_time', ea.STATE_SET).withValueMin(1)
        .withValueMax(15000)
        .withValueStep(1)
        .withUnit('s').withDescription('keep_time'),

    ],
    meta: {
        multiEndpoint: true,
        tuyaDatapoints: [
            [104, 'presence', tuya.valueConverter.trueFalse1],
            [2, 'radar_sensitivity', tuya.valueConverter.raw],
            [102, 'presence_sensitivity', tuya.valueConverter.raw],

            [3, 'detection_distance_min', tuya.valueConverter.divideBy100],
            [4, 'detection_distance_max', tuya.valueConverter.divideBy100],

            [9, 'distance', tuya.valueConverter.divideBy10],

            [105, 'keep_time', tuya.valueConverter.raw],
            [103, 'illuminance_lux', tuya.valueConverter.raw],
            [1, 'state', tuya.valueConverterBasic.lookup({
                'none': 0,
                'presence': 1,
                'move': 2
            })],

        ],
    },
    extend: [
        // A preferred new way of extending functionality.
    ],
};

module.exports = definition;

Koenkk / zigbee2mqtt