search

Koenkk / zigbee2mqtt

Zigbee 🐝 to MQTT bridge 🌉, get rid of your proprietary Zigbee bridges 🔨
https://www.zigbee2mqtt.io
GNU General Public License v3.0
12.21k stars 1.68k forks source link

TuYa CK-BL702-AL-01 Feature "Do not disturb" not working #23000

Open dan73800 opened 5 months ago

dan73800 commented 5 months ago

What happened?

When I pair a bulb TuYa CK-BL702-AL-01 in my Z2M, I have a feature "Do not disturb" supposed to keep last status after power lost, but this feature is not working

What did you expect to happen?

If I choose "Do not disturb = true" when power is lost, my bulb should stay off, but even with true or false, it does not change and the bulb lights on after a power lost

image

How to reproduce it (minimal and precise)

Put the light Off, set the switch "do not disturb : true" Power off the bulb as a current lost, then turn in back on and you will se the light turning on. It is the same case with "do not disturb set to false"

Zigbee2MQTT version

1.38.0

Adapter firmware version

7.4.3 [GA]

Adapter

Sonoff ZDongle-E EmberZNet

Setup

arm64 Jeedom

Debug log

empty log for this

rmxs commented 5 months ago

After power outage i realize the same issue. All CK-BL702-AL-01 from off before the power outage turn on after power return.

Just checked again and CK-BL702-AL-01 on device list photo is e27 bulb https://www.zigbee2mqtt.io/devices/CK-BL702-AL-01.html#tuya-ck-bl702-al-01

Im using GU10 bulb with the same model ( https://zigbee.blakadder.com/eWeLink_CK-BL702-AL-01.html )

Update: Test all my bulbs GU10, and E14 and E27 with the same model. Do not disturb doesnt work at all.

Looks like "Color power on behavior" is also broken. Always power on to the previous

defenseindepth1337 commented 2 months ago

I am facing the same issue with my bulbs even on the latest version(1.40.0-1).

@Koenkk : Could you please look this this? Thanks in advance!

DlargeX commented 2 months ago

I also have Gu10 and E27 lights and they are equipped with FW 1.2.3. Does anyone know which FW is current since I don't have a Tuya Bridge?

dimacoupe commented 3 weeks ago

[CK-BL702-AL-01] in ceiling light form factor. really too buggy. i have the same issue + device state offline but react on all action.

JosephTico commented 1 week ago

Can confirm the issue

insleys commented 1 week ago

Same issue here with all my E14 versions of this bulb. I'm wondering if someone can confirm whether Do Not Disturb is actually an implemented feature on the controller on this bulb? I suppose it's possible that this isn't a Z2M issue. Has anyone tested in any other non-Z2M environment?

dimacoupe commented 1 week ago

Same issue here with all my E14 versions of this bulb. I'm wondering if someone can confirm whether Do Not Disturb is actually an implemented feature on the controller on this bulb? I suppose it's possible that this isn't a Z2M issue. Has anyone tested in any other non-Z2M environment?

I think this is a problem with the entire product line. I have 4 E27 light bulbs and 3 ceiling lamps with this marking, they all have the same problem in Z2M. There are no settings at all in TUYA, including “do not disturb”

insleys commented 1 week ago

I think this is a problem with the entire product line. I have 4 E27 light bulbs and 3 ceiling lamps with this marking, they all have the same problem in Z2M. There are no settings at all in TUYA, including “do not disturb”

I guess you get what you pay for then. I suppose £2.71 a bulb of AliExpress was too good to be true. Thanks for confirming.