z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'includes')

[janivr]

What happened?

"z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'includes')" Suddenly, my device stopped working and I get this error for any action on the device.

`const fz = require('zigbee-herdsman-converters/converters/fromZigbee'); const tz = require('zigbee-herdsman-converters/converters/toZigbee'); const exposes = require('zigbee-herdsman-converters/lib/exposes'); const reporting = require('zigbee-herdsman-converters/lib/reporting'); //const extend = require('zigbee-herdsman-converters/lib/extend'); const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend'); const e = exposes.presets; const ea = exposes.access; const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = { // Since a lot of TuYa devices use the same modelID, but use different datapoints // it's necessary to provide a fingerprint instead of a zigbeeModel fingerprint: [ { // The model ID from: Device with modelID 'TS0601' is not supported // You may need to add \u0000 at the end of the name in some cases modelID: 'TS0601', // The manufacturer name from: Device with modelID 'TS0601' is not supported. manufacturerName: '_TZE200_7a5ob7xq', }, ], //zigbeeModel: ['TS0601'], model: 'TS0601_new', vendor: 'Tuya', description: 'Uri Curtain Switch plus Lights', // Description of the device, copy from vendor site. (only used for documentation and startup logging) //extend: [], //fromZigbee: [fz.ignore_basic_report, fz.tuya_switch], //toZigbee: [tz.tuya_switch_state], fromZigbee: [tuya.fz.datapoints], // We will add this later toZigbee: [tuya.fz.datapoints], // Should be empty, unless device can be controlled (e.g. lights, switches). //fromZigbee: [tuya.fzDataPoints], //toZigbee: [tuya.tzDataPoints], onEvent: tuya.onEventSetTime, // Add this if you are getting no converter for 'commandMcuSyncTime' configure: tuya.configureMagicPacket, exposes: [ // Here you should put all functionality that your device exposes e.switch().withEndpoint('l1').setAccess('state', ea.STATE_SET), e.switch().withEndpoint('l2').setAccess('state', ea.STATE_SET), e.switch().withEndpoint('l3').setAccess('state', ea.STATE_SET), e.switch().withEndpoint('l4').setAccess('state', ea.STATE_SET) ],

meta: {
    // All datapoints go in here
    tuyaDatapoints: [
    ],
},

//meta: {multiEndpoint: true},
//exposes: [e.switch().withEndpoint('l1').setAccess('state', ea.STATE_SET),
//        e.switch().withEndpoint('l2').setAccess('state', ea.STATE_SET),
//        e.switch().withEndpoint('l3').setAccess('state', ea.STATE_SET),
//        e.switch().withEndpoint('l4').setAccess('state', ea.STATE_SET)], // Defines what this device exposes, used for e.g. Home Assistant discovery and in the frontend
//endpoint: (device) => {
//        // Endpoint selection is made in tuya_switch_state
//        return {'l1': 1, 'l2': 1, 'l3': 1, 'l4': 1};
//    },

};

module.exports = definition;

`

What did you expect to happen?

my device will work, all 4 actions.

How to reproduce it (minimal and precise)

happens all time

Zigbee2MQTT version

1.39.0

Adapter firmware version

20220219

Adapter

sonoff

Setup

home assistant

Debug log

[2024-07-13 14:39:45] debug: z2m:mqtt: Received MQTT message on 'zigbee2mqtt/0x04cd15fffefb6680/set' with data '{"state_l1":"ON"}' [2024-07-13 14:39:45] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'includes') [2024-07-13 14:39:45] debug: z2m: TypeError: Cannot read properties of undefined (reading 'includes') at /app/lib/extension/publish.ts:232:60 at Array.find () at Publish.onMQTTMessage (/app/lib/extension/publish.ts:232:42) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:23) at EventEmitter.emit (node:events:529:35) at EventBus.emitMQTTMessage (/app/lib/eventBus.ts:115:22) at MQTT.onMessage (/app/lib/mqtt.ts:147:27) at WebSocket. (/app/lib/extension/frontend.ts:138:27) at WebSocket.emit (node:events:517:28) at Receiver.receiverOnMessage (/app/node_modules/ws/lib/websocket.js:1211:20) [2024-07-13 14:39:46] debug: zh:zstack:unpi:parser: <-- [254,25,68,129,0,0,10,0,69,194,1,1,0,43,0,43,147,114,0,0,5,0,246,0,7,0,69,194,29,222]

[janivr]

Hello, When will I get an answer or help? Thanks

[janivr]

Still Exists

[janivr]

Please help

[mremedi2023]

Same here

[KoKolaj]

After today's update - 1.40.0-1

[2024-09-02 17:36:39] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:36:49] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:37:00] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:37:27] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:37:39] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:38:06] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:38:21] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:38:33] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:39:03] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-02 17:39:19] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')

[janivr]

Solved?

Get Outlook for iOShttps://aka.ms/o0ukef

---

From: KoKolaj @.> Sent: Monday, September 2, 2024 6:44:37 PM To: Koenkk/zigbee2mqtt @.> Cc: janivr @.>; Author @.> Subject: Re: [Koenkk/zigbee2mqtt] z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'includes') (Issue #23335)

After today's update

[2024-09-02 17:36:39] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:36:49] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:37:00] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:37:27] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:37:39] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:38:06] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:38:21] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:38:33] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:39:03] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-02 17:39:19] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')

— Reply to this email directly, view it on GitHubhttps://github.com/Koenkk/zigbee2mqtt/issues/23335#issuecomment-2325010981, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AAHNBFXCXJ5HL4Q2DHDCQMDZUSBWLAVCNFSM6AAAAABK2HB2RSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRVGAYTAOJYGE. You are receiving this because you authored the thread.Message ID: @.***>

[hoskerism]

Same here. Every device reporting: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')

Started after upgrading yesterday.

[maddoglee]

I get this error as well

[rafapoch]

running version 1.40.0 getting the same issue

[Domochip]

Having the same error using ZDMS16-1 from Avatto (I've just received it and pair it)

I can control the brightness and the on/off successfully but get the error message for every action done

z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')

Here is my z2m relevant infos: Zigbee2MQTT version: 1.40.0 commit: 6fa1dab Coordinator type: zStack3x0 Coordinator revision: 20240315

more details with debug log level:

[2024-09-03 12:49:41] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/dimmer1', payload '{"brightness":152,"countdown":null,"linkquality":131,"max_brightness":255,"min_brightness":1,"power_on_behavior":"previous","state":"OFF","switch_type":"toggle"}'
[2024-09-03 12:49:41] error:    z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')
[2024-09-03 12:49:41] debug:    z2m: TypeError: Cannot read properties of undefined (reading 'some')
    at /app/lib/extension/publish.ts:326:95
    at Array.some (<anonymous>)
    at /app/lib/extension/publish.ts:326:77
    at Array.some (<anonymous>)
    at Publish.onMQTTMessage (/app/lib/extension/publish.ts:326:61)
    at processTicksAndRejections (node:internal/process/task_queues:95:5)
    at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17)

[KoKolaj]

https://github.com/Koenkk/zigbee2mqtt/issues/23821

[silkyclouds]

yep, same here

[2024-09-05 21:17:51] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some') [2024-09-05 21:17:51] error: z2m: EventBus error 'Publish/mqttMessage': Cannot read properties of undefined (reading 'some')